# packages

pkgId: 63e3ffde52200f23891497ff344046c862afd50ee700bd32b3e289536e1eda8d
name: bwbar
arch: src
version: 1.2.3
epoch: 0
release: 36.fc40
summary: Generate a readout of the current bandwidth use
url: http://www.kernel.org/pub/software/web/bwbar/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/bwbar-1.2.3-36.fc40.src.rpm
checksum_type: sha256
description:
  bwbar is a small program that generates a text and a graphical readout
  of the current bandwidth use.  It is currently for Linux only.


pkgId: 0c0dda34c4dbd6e8e94199a64adea1effc5fde10bf51c0304e9e6d2499fc4f18
name: bwm-ng
arch: src
version: 0.6.3
epoch: 0
release: 3.fc40
summary: Bandwidth Monitor NG
url: https://github.com/vgropp/bwm-ng
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/bwm-ng-0.6.3-3.fc40.src.rpm
checksum_type: sha256
description:
  A small and simple console-based live network and disk io bandwidth monitor.

  Features:
  - Supports /proc/net/dev, netstat, getifaddr, sysctl, kstat, /proc/diskstats
  /proc/partitions, IOKit, devstat and libstatgrab
  - Unlimited number of interfaces/devices supported
  - Interfaces/devices are added or removed dynamically from list
  - White-/blacklist of interfaces/devices
  - Output of KB/s, Kb/s, packets, errors, average, max and total sum
  - Output in curses, plain console, CSV or HTML
  - Configfile


pkgId: 83cf78fd96706b6286916f7e2d9d3de4831e26b84bb8dc68eaebdda21adae4f7
name: bwping
arch: src
version: 2.5
epoch: 0
release: 4.fc40
summary: Measure bandwidth and response times using ICMP
url: http://bwping.sourceforge.net/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/bwping-2.5-4.fc40.src.rpm
checksum_type: sha256
description:
  BWPing is a tool to measure bandwidth and response
  times between two hosts using Internet Control Message
  Protocol (ICMP) echo request/echo reply mechanism.
  It does not require any special software on the remote host.
  The only requirement is the ability to respond on ICMP echo
  request messages.


pkgId: ada48213b2030b7617f8ece58490dacb7c467f2e5613a9722788375f3ef0c3f8
name: byacc
arch: src
version: 2.0.20230521
epoch: 0
release: 5.fc40
summary: Berkeley Yacc, a parser generator
url: http://invisible-island.net/byacc/byacc.html
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/byacc-2.0.20230521-5.fc40.src.rpm
checksum_type: sha256
description:
  This package provides a parser generator utility that reads a grammar
  specification from a file and generates an LR(1) parser for it.  The
  parsers consist of a set of LALR(1) parsing tables and a driver
  routine written in the C programming language.  It has a public domain
  license which includes the generated C.

  If you are going to do development on your system, you will want to install
  this package.

rpm_license:
  LicenseRef-Fedora-Public-Domain AND GPL-3.0-or-later WITH Autoconf-exception-generic-3.0 AND X11 AND X11-distribute-modifications-variant AND FSFUL


pkgId: 5bdfbe350d0f5fb5591e5500281811d250e33e5bd7f9c13a601eef1a3f6b8bbe
name: byaccj
arch: src
version: 1.15
epoch: 0
release: 34.fc40
summary: Parser Generator with Java Extension
url: http://byaccj.sourceforge.net/
rpm_license: LicenseRef-Fedora-Public-Domain
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/byaccj-1.15-34.fc40.src.rpm
checksum_type: sha256
description:
  BYACC/J is an extension of the Berkeley v 1.8 YACC-compatible
  parser generator. Standard YACC takes a YACC source file, and
  generates one or more C files from it, which if compiled properly,
  will produce a LALR-grammar parser. This is useful for expression
  parsing, interactive command parsing, and file reading. Many
  megabytes of YACC code have been written over the years.
  This is the standard YACC tool that is in use every day to produce
  C/C++ parsers. I have added a "-J" flag which will cause BYACC to
  generate Java source code, instead. So there finally is a YACC for
  Java now!


pkgId: aad5dfee625c08401743a60cc269a5759ccfde80e142428c95695982195cc6db
name: bzflag
arch: src
version: 2.4.26
epoch: 0
release: 4.fc40
summary: 3D multi-player tank battle game
url: http://bzflag.org
rpm_license: LGPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/bzflag-2.4.26-4.fc40.src.rpm
checksum_type: sha256
description:
  BZFlag is a 3D multi-player tank battle game  that  allows users to play
  against each other in a networked environment.  There are five teams: red,
  green, blue, purple and rogue (rogue tanks are black).  Destroying a player
  on another team  scores a win, while being destroyed or destroying a teammate
  scores a loss.  Rogues have no teammates (not even other rogues), so they
  cannot shoot teammates and they do not have a team score.
  There are two main styles of play: capture-the-flag and free-for-all.


pkgId: 5d79b25064036103913d0203cf814c94b6092d4f2565b1134d93df45a097502c
name: bzip3
arch: src
version: 1.4.0
epoch: 0
release: 3.fc40
summary: Tools for compressing and decompressing bzip3 files
url: https://github.com/kspalaiologos/bzip3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/bzip3-1.4.0-3.fc40.src.rpm
checksum_type: sha256
description:
  These are tools for compressing, decompressing, printing, and searching bzip3
  files. bzip3 features higher compression ratios and better performance than
  bzip2 thanks to an order-0 context mixing entropy coder, a fast
  Burrows-Wheeler transform code making use of suffix arrays and a run-length
  encoding with Lempel-Ziv prediction pass based on LZ77-style string matching
  and PPM-style context modeling.

rpm_license:
  GPL-3.0-or-later AND GPL-3.0-or-later WITH Autoconf-exception-macro AND GPL-3.0-or-later WITH Autoconf-exception-generic-3.0 AND GPL-2.0-or-later WITH Autoconf-exception-generic AND GPL-2.0-or-later WITH Libtool-exception AND LGPL-3.0-or-later AND BSD-2-Clause AND Apache-2.0 AND MIT AND X11 AND FSFULLR AND FSFUL AND FSFAP


pkgId: 4c906763052b6551cdefde55558cc53c2be8d619715d890964e15e8b748e11e7
name: c-graph
arch: src
version: 2.0.1
epoch: 0
release: 11.fc40
summary: Convolution Graph
url: http://www.gnu.org/software/c-graph
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/c-graph-2.0.1-11.fc40.src.rpm
checksum_type: sha256
description:
  Convolution Theorem Visualization

  Convolution is a core concept in today's cutting-edge technologies of
  deep learning and computer vision. Singularly cogent in application to
  digital signal processing, the convolution theorem is regarded as the
  most powerful tool in modern scientific analysis. Long utilised for
  accelerating the application of filters to images, fast training of
  convolutional neural networks exploit the convolution theorem to accelerate
  training and inference in the ubiquitous applications of computer vision
  that, today, are at the vanguard of the evolving artificially intelligent
  world in which we are becoming increasingly immersed.

  Coded in modern Fortran, GNU C-Graph is the de facto tool for visualizing
  convolution in university courses worldwide. "C-Graph" stands for
  "Convolution Graph" - Free Software that makes learning about convolution
  easy!


pkgId: c222b68adc4227e2b2a1ea3888a73192764cd2d5aab32864abcd9fdfeafc9953
name: ca-certificates
arch: src
version: 2023.2.62_v7.0.401
epoch: 0
release: 6.fc40
summary: The Mozilla CA root certificate bundle
url: https://fedoraproject.org/wiki/CA-Certificates
rpm_license: MIT AND GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ca-certificates-2023.2.62_v7.0.401-6.fc40.src.rpm
checksum_type: sha256
description:
  This package contains the set of CA certificates chosen by the
  Mozilla Foundation for use with the Internet PKI.


pkgId: 36fefca3428f996b9630767b69b84684a982f5a3b713cad6036944fe07b95150
name: cachefilesd
arch: src
version: 0.10.10
epoch: 0
release: 18.fc40
summary: CacheFiles user-space management daemon
url: http://people.redhat.com/~dhowells/fscache/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cachefilesd-0.10.10-18.fc40.src.rpm
checksum_type: sha256
description:
  The cachefilesd daemon manages the caching files and directory that are that
  are used by network file systems such a AFS and NFS to do persistent caching to
  the local disk.


pkgId: 4bcf8bf72de4adfa7e6a2c4645384b098640eddd9d17c156f7ded0ed6f426986
name: cadaver
arch: src
version: 0.24
epoch: 0
release: 5.fc40
summary: Command-line WebDAV client
url: http://www.webdav.org/cadaver/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cadaver-0.24-5.fc40.src.rpm
checksum_type: sha256
description:
  cadaver is a command-line WebDAV client, with support for file upload,
  download, on-screen display, in-place editing, namespace operations
  (move/copy), collection creation and deletion, property manipulation,
  and resource locking.


pkgId: 713305e4979677bc1261e19551025708302b0a80f13bf5eb85a8416cfde1e40e
name: cadical
arch: src
version: 1.9.5
epoch: 1
release: 1.fc40
summary: Simplified SAT solver
url: http://fmv.jku.at/cadical/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cadical-1.9.5-1.fc40.src.rpm
checksum_type: sha256
description:
  CaDiCaL is a simplified Satisfiability solver.  The goal of the
  development of CaDiCaL is to obtain a CDCL solver, which is easy to
  understand and change, while at the same time not being much slower
  than other state-of-the-art CDCL solvers.


pkgId: 644b1ce5b29a573bcf4c8a3578d13fbf09a90b7a329f2d53051b297ce9a51796
name: cairo
arch: src
version: 1.18.0
epoch: 0
release: 3.fc40
summary: A 2D graphics library
url: https://cairographics.org
rpm_license: LGPL-2.1-only OR MPL-1.1
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cairo-1.18.0-3.fc40.src.rpm
checksum_type: sha256
description:
  Cairo is a 2D graphics library designed to provide high-quality display
  and print output. Currently supported output targets include the X Window
  System, in-memory image buffers, and image files (PDF, PostScript, and SVG).

  Cairo is designed to produce consistent output on all output media while
  taking advantage of display hardware acceleration when available.


pkgId: 9a5b83110b85c888d66c3560ad1d930a6580ce08483afffa9c08c05412b8b83f
name: caja
arch: src
version: 1.28.0
epoch: 0
release: 1.fc40
summary: File manager for MATE
url: http://mate-desktop.org
rpm_license: GPLv2+ and LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/caja-1.28.0-1.fc40.src.rpm
checksum_type: sha256
description:
  Caja (mate-file-manager) is the file manager and graphical shell
  for the MATE desktop,
  that makes it easy to manage your files and the rest of your system.
  It allows to browse directories on local and remote file systems, preview
  files and launch applications associated with them.
  It is also responsible for handling the icons on the MATE desktop.


pkgId: 6e38fb09616f4353770c4a06a33eaedc4eb97c4cfc05cbafcef0c875f5459568
name: caja-actions
arch: src
version: 1.28.0
epoch: 0
release: 1.fc40
summary: Caja extension for customizing the context menu
url: https://github.com/raveit65/caja-actions
rpm_license: GPLv2+ and LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/caja-actions-1.28.0-1.fc40.src.rpm
checksum_type: sha256
description:
  Caja actions is an extension for Caja, the MATE file manager.
  It provides an easy way to configure programs to be launch on files
  selected in Caja interface


pkgId: 7f3b95f5a905e999e44f82b32036eb4ce4c8b39a05b42397d27bfc94b3bcb1a2
name: calamaris
arch: src
version: 2.99.4.8
epoch: 0
release: 1
summary: Analyzer and report generator for web proxy servers like Squid
url: https://cord.de/calamaris-english
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/calamaris-2.99.4.8-1.src.rpm
checksum_type: sha256
description:
  Calamaris is used to produce statistical output from web proxy servers
  like Squid, NetCache, Inktomi Traffic Server, Oops! proxy server, Compaq
  TaskSmart, Cisco Content Engines, iPlanet Proxy Server or related proxy
  log files. The resulting output can be ASCII or HTML with or without
  graphics and with or without frames. It is possible to cache calculated
  data in a file to use them in later runs.


pkgId: 94460ef9e44d74a039199df266e52ac66b5a9dab0d832121b717e79fa20f8336
name: calc
arch: src
version: 2.15.0.2
epoch: 0
release: 3.fc40
summary: Arbitrary precision arithmetic system and calculator
url: http://isthe.com/chongo/tech/comp/calc/
rpm_license: LGPL-2.1-only AND Unlicense
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/calc-2.15.0.2-3.fc40.src.rpm
checksum_type: sha256
description:
  Calc is an arbitrary precision C-like arithmetic system that is a
  calculator, an algorithm-prototyper, and a mathematical research tool. Calc
  comes with a rich set of built-in mathematical and programmatic functions.


pkgId: 0b2bc5b53ef4bebc4ed20f60391efad89dccb9f08ccdff1d89c77185d2f7fab6
name: calcurse
arch: src
version: 4.8.1
epoch: 0
release: 4.fc40
summary: Text-based personal organizer
url: https://calcurse.org
rpm_license: BSD-2-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/calcurse-4.8.1-4.fc40.src.rpm
checksum_type: sha256
description:
  Calcurse is a text-based calendar and scheduling application. It helps
  keep track of events, appointments, and everyday tasks.

  A configurable notification system reminds the user of upcoming
  deadlines, and the curses based interface can be customized to suit user
  needs.


pkgId: 2ee1d8910c53c1bc48b430184b6d0a0acbd10986f7c8b5046d8dbe1503a4a555
name: calendar
arch: src
version: 1.37
epoch: 0
release: 6.20240209cvs.fc40
summary: Reminder utility
url: http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/calendar
rpm_license: BSD-3-Clause AND BSD-2-Clause AND ISC
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/calendar-1.37-6.20240209cvs.fc40.src.rpm
checksum_type: sha256
description:
  The OpenBSD calendar command is a reminder utility.  Calendar reads
  a mix of configuration files and standard calendar databases and
  then displays lines that begin with either today's date or
  tomorrow's.  The output of the command shows upcoming events for the
  week.


pkgId: e4f247f0c419cde42571df9eea0602f2a40b93a7fe3f2aca90088fbb3dff40d9
name: calf
arch: src
version: 0.90.3
epoch: 0
release: 18.fc40
summary: Audio plugins pack
url: http://calf-studio-gear.org/
rpm_license: GPL-2.0-or-later and LGPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/calf-0.90.3-18.fc40.src.rpm
checksum_type: sha256
description:
  The Calf project aims at providing a set of high quality open source audio
  plugins for musicians. All the included plugins are designed to be used with
  multitrack software, as software replacement for instruments and guitar stomp
  boxes.

  The plugins are available in LV2, DSSI, Standalone JACK and LADSPA formats.
  This package contains the common files and the Standalone JACK plugin.


pkgId: 29afbcc44f3fddad226db145232938ebce492b0cfa261716b75581362a4cd0d5
name: callaudiod
arch: src
version: 0.1.9
epoch: 0
release: 4.fc40
summary: Daemon for dealing with audio routing during phone calls
url: https://gitlab.com/mobian1/callaudiod
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/callaudiod-0.1.9-4.fc40.src.rpm
checksum_type: sha256
description:
  callaudiod is a daemon for dealing with audio routing during phone calls.
  It provides a D-Bus interface allowing other programs to:

  switch audio profiles
  output audio to the speaker or back to its original port
  mute the microphone


pkgId: 4bc444c43cc584ea72830888a0b0dea80c2036d4d1f738d61ff49e391b45a987
name: callgit
arch: src
version: 2.0
epoch: 0
release: 33.fc40
summary: A tool for Ham Radio Operators to look up call-signs on the web
url: http://www.hamsoftware.org/
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/callgit-2.0-33.fc40.src.rpm
checksum_type: sha256
description:
  This program allows you to search for another Ham's name and address
  without having a web browser up. It is very simple.


pkgId: fba08ffe3fe906e544439abb8f946d55230c4995f3eaa627ffc8143ef064b2e6
name: can-utils
arch: src
version: 2023.03
epoch: 0
release: 3.fc40
summary: SocketCAN user space utilities and tools
url: https://github.com/linux-can/can-utils
rpm_license: GPLv2 and (GPLv2 or BSD)
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/can-utils-2023.03-3.fc40.src.rpm
checksum_type: sha256
description:
  CAN is a message-based network protocol designed for vehicles originally
  created by Robert Bosch GmbH. SocketCAN is a set of open source CAN
  drivers and a networking stack contributed by Volkswagen Research to
  the Linux kernel.

  This package contains some user space utilities for Linux SocketCAN subsystem.


pkgId: 83bbf6ba9a9a2558a00f478fce37e3f6b254c5a616ad522602d3ef3fa6eb61b1
name: capstats
arch: src
version: 0.26
epoch: 0
release: 14.fc40
summary: A command-line tool collecting packet statistics
url: https://github.com/zeek/capstats
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/capstats-0.26-14.fc40.src.rpm
checksum_type: sha256
description:
  capstats is a small tool to collect statistics on the current load of a
  network interface. It reports statistics per time interval and/or for the
  tool's total run-time.


pkgId: 66b25eabf1b5f83aeaedf7283aaba69cf450f23a1d0770d1c74c1a14b4571221
name: carat
arch: src
version: 2.1
epoch: 1
release: 5.20211018gitfd0b757.fc40
summary: Crystallographic AlgoRithms And Tables
url: https://lbfm-rwth.github.io/carat/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/carat-2.1-5.20211018gitfd0b757.fc40.src.rpm
checksum_type: sha256
description:
  CARAT handles enumeration, construction, recognition, and comparison
  problems for crystallographic groups up to dimension 6.  The name CARAT
  is an acronym for Crystallographic AlgoRithms And Tables.

  Due to its specialized nature and some generically named binaries, this
  package uses environment modules to access its binaries.


pkgId: f5490500b9a7ebacb148b224e83461f456a8c2f96b2b153ce60480893ced75ac
name: caribou
arch: src
version: 0.4.21
epoch: 0
release: 38.fc40
summary: A simplified in-place on-screen keyboard
url: https://wiki.gnome.org/Projects/Caribou
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/caribou-0.4.21-38.fc40.src.rpm
checksum_type: sha256
description:
  Caribou is a text entry application that currently manifests itself as
  a simplified in-place on-screen keyboard.


pkgId: 277907f7fa40c52ecbb5a9db31044a1a981b8108f92548db16a403bf68854904
name: cascadia-code-fonts
arch: src
version: 2111.01
epoch: 0
release: 8.fc40
summary: A mono-spaced font designed for programming and terminal emulation
url: https://github.com/microsoft/cascadia-code/
rpm_license: OFL-1.1-RFN
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cascadia-code-fonts-2111.01-8.fc40.src.rpm
checksum_type: sha256
description:
  Cascadia Code is a mono-spaced font designed to provide a fresh experience for
  command line experiences and code editors. Notably, it supports programming
  ligatures.


pkgId: 250d022d0f2277b95db16aaccd8c2ae5f07d996f5c3774a71dd3eed81f0efda8
name: castget
arch: src
version: 2.0.1
epoch: 0
release: 9.fc40
summary: A command-line podcast downloader
url: https://castget.johndal.com/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/castget-2.0.1-9.fc40.src.rpm
checksum_type: sha256
description:
  castget is a simple, command-line based RSS enclosure downloader. It is
  primarily intended for automatic, unattended downloading of podcasts.


pkgId: 0cbc9a39e06d4ee561b51f047e6faae4b90dc390b8223eb9e6f7473e00dd0cab
name: catatonit
arch: src
version: 0.1.7
epoch: 0
release: 22.fc40
summary: A signal-forwarding process manager for containers
url: https://github.com/openSUSE/catatonit
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/catatonit-0.1.7-22.fc40.src.rpm
checksum_type: sha256
description:
  Catatonit is a /usr/sbin/init program for use within containers. It
  forwards (almost) all signals to the spawned child, tears down
  the container when the spawned child exits, and otherwise
  cleans up other exited processes (zombies).

  This is a reimplementation of other container init programs (such as
  "tini" or "dumb-init"), but uses modern Linux facilities (such as
  signalfd(2)) and has no additional features.


pkgId: e56a64a5e5e0507bc35e08291f3f559b2d26a68e6d67a2647aee12e94331df28
name: catdoc
arch: src
version: 0.95
epoch: 0
release: 17.fc40
summary: A program which converts Microsoft office files to plain text
url: http://www.wagner.pp.ru/~vitus/software/catdoc/
rpm_license: GPL+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/catdoc-0.95-17.fc40.src.rpm
checksum_type: sha256
description:
  catdoc is program which reads one or more Microsoft word files
  and outputs text, contained insinde them to standard output.
  Therefore it does same work for.doc files, as unix cat
  command for plain ASCII files.
  It is now accompanied by xls2csv - program which converts
  Excel spreadsheet into comma-separated value file,
  and catppt - utility to extract textual information
  from Powerpoint files


pkgId: 56483bcdcbd22199108cc7a40a831ff19329d5d7b3082e3e38b6600d37ae55db
name: catfish
arch: src
version: 4.18.0
epoch: 0
release: 3.fc40
summary: A handy file search tool
url: https://docs.xfce.org/apps/catfish/start
rpm_license: GPL-2.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/catfish-4.18.0-3.fc40.src.rpm
checksum_type: sha256
description:
  Catfish is a handy file searching tool. The interface is
  intentionally lightweight and simple, using only GTK+3.
  You can configure it to your needs by using several command line
  options.


pkgId: f92631e26086a93fabb2acd3869e3598d0983e14d6d69630264fc0a2ebe024f3
name: cawbird
arch: src
version: 1.4.2
epoch: 0
release: 9.fc40
summary: Fork of the Corebird GTK Twitter client that continues to work with Twitter
url: https://github.com/IBBoard/cawbird
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cawbird-1.4.2-9.fc40.src.rpm
checksum_type: sha256
description:
  Cawbird is a fork of the Corebird Twitter client from Baedert, which became
  unsupported after Twitter disabled the streaming API.

  Cawbird works with the new APIs and includes a few fixes and modifications
  that have historically been patched in to IBBoard's custom Corebird build on
  his personal Open Build Service account.


pkgId: 846b94164dcea1865572c05b230b4eb6264c78442d6f85a05744975762133711
name: cbios
arch: src
version: 0.29a
epoch: 0
release: 12.fc40
summary: A third party BIOS compatible with the MSX BIOS
url: http://cbios.sourceforge.net/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cbios-0.29a-12.fc40.src.rpm
checksum_type: sha256
description:
  C-BIOS is a BIOS compatible with the MSX BIOS written from scratch by BouKiCHi.
  It is available for free, including its source code and can be shipped with MSX
  emulators so they are usable out-of-the-box without copyright issues.


pkgId: 640d709e37c720db127f27167a225e515b30b9181b63d947e424ee87c6a83670
name: cbootimage
arch: src
version: 1.8
epoch: 0
release: 14.fc40
summary: Tools to dump and generate boot config table on Tegra devices
url: https://github.com/NVIDIA/cbootimage
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cbootimage-1.8-14.fc40.src.rpm
checksum_type: sha256
description:
  This package contains two programs to parse the boot config table (bct)
  of Tegra SoC based devices and to generate a new bct with appended
  bootloader (e.g. u-boot) read to be flashed to a storage device.
  The boot config table is used in the early boot process to setup the sdhci,
  DRAM memory controller and also points to the position of the bootloader.

  For more information, see:
  http://http.download.nvidia.com/tegra-public-appnotes/bct-overview.html


pkgId: a04f771fe9e05733030c04461d7233cc89e6051683170cbde2f511cb7409ff07
name: cbrpager
arch: src
version: 0.9.22
epoch: 0
release: 31.fc40
summary: Simple comic book pager for Linux
url: http://www.jcoppens.com/soft/cbrpager/index.en.php
rpm_license: GPL-2.0-or-later AND CC0-1.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cbrpager-0.9.22-31.fc40.src.rpm
checksum_type: sha256
description:
  A no-nonsense, simple to use, small viewer for cbr and cbz
  (comic book archive) files. As it is written in C,
  the executable is small and fast. It views jpg (or jpeg),
  gif and png images, and you can zoom in and out.


pkgId: ec43bd28daae3b2a34f0206dbe520bcdc68f81a581915210accae43b66329ccc
name: cc1541
arch: src
version: 4.1
epoch: 0
release: 4.fc40
summary: Tool for creating Commodore Floppy disk images in D64, G64, D71 or D81 format
url: https://bitbucket.org/PTV_Claus/cc1541
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cc1541-4.1-4.fc40.src.rpm
checksum_type: sha256
description:
  This is cc1541 v4.1, a tool for creating Commodore 1541
  Floppy disk images in D64, G64, D71 or D81 format with custom
  sector interleaving etc.   Also supports extended tracks 35-40
  using either SPEED DOS or DOLPHIN DOS BAM-formatting.


pkgId: 9e77816569b7a3202fda2bd792d3dcfa62b66c217662ca2a7dbb475f2359d4fe
name: cc65
arch: src
version: 2.19
epoch: 0
release: 10.fc40
summary: A free C compiler for 6502 based systems
url: https://cc65.github.io
rpm_license: zlib
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cc65-2.19-10.fc40.src.rpm
checksum_type: sha256
description:
  cc65 is a complete cross development package for 65(C)02 systems,
  including a powerful macro assembler, a C compiler, linker,
  librarian and several other tools.

  cc65 has C and runtime library support for many of the old 6502
  machines, including

  - the following Commodore machines:
    - VIC20
    - C16/C116 and Plus/4
    - C64
    - C128
    - CBM 510 (aka P500)
    - the 600/700 family
    - newer PET machines (not 2001).
  - the Apple ]\[+ and successors.
  - the Atari 8 bit machines.
  - the Atari 2600 console.
  - the Atari 5200 console.
  - GEOS for the C64, C128 and Apple //e.
  - the Bit Corporation Gamate console.
  - the NEC PC-Engine (aka TurboGrafx-16) console.
  - the Nintendo Entertainment System (NES) console.
  - the Watara Supervision console.
  - the VTech Creativision console.
  - the Oric Atmos.
  - the Oric Telestrat.
  - the Lynx console.
  - the Ohio Scientific Challenger 1P.


pkgId: bcb254411393e88620fd986373344798574020ac61a68e658e2ba9ae10aabcb8
name: ccd2iso
arch: src
version: 0.3
epoch: 0
release: 34.fc40
summary: CloneCD image to ISO image file converter
url: http://ccd2iso.sourceforge.net/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ccd2iso-0.3-34.fc40.src.rpm
checksum_type: sha256
description:
  The ccd2iso project converts CD backup files created using the non-free CloneCD
  program to a format understood by most Free Software CD writing programs.


pkgId: 991ef4f0445774c3a140759cf84aa1b4c53c4885c20d95dc3935b4a80901b0f9
name: cciss_vol_status
arch: src
version: 1.12
epoch: 0
release: 15.fc40
summary: Show status of logical drives attached to HP SmartArray controllers
url: http://cciss.sourceforge.net/#cciss_utils
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cciss_vol_status-1.12-15.fc40.src.rpm
checksum_type: sha256
description:
  A very lightweight program to report the status of logical drives on
  Smart Array controllers and also fibre channel attached MSA1000.


pkgId: a9fb703490697f84a1bd05a82d0e69a144fd8f554aa02f4fdeb84caa483d42a8
name: ccze
arch: src
version: 0.2.1
epoch: 0
release: 46.fc40
summary: A robust log colorizer
url: http://bonehunter.rulez.org/CCZE.html
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ccze-0.2.1-46.fc40.src.rpm
checksum_type: sha256
description:
  CCZE is a roboust and modular log colorizer, with plugins for apm,
  exim, fetchmail, httpd, postfix, procmail, squid, syslog, ulogd,
  vsftpd, xferlog and more.


pkgId: 357b9e677294ed54103e145dce7a2c9134cf75a5d40866f1d534b60325fc8ef7
name: cd-discid
arch: src
version: 1.4
epoch: 0
release: 26.fc40
summary: Utility to get CDDB discid information
url: http://linukz.org/cd-discid.shtml
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cd-discid-1.4-26.fc40.src.rpm
checksum_type: sha256
description:
  cd-discid is a backend utility to get CDDB discid information for a
  CD-ROM disc.  It was originally designed for cdgrab (now abcde), but
  can be used for any purpose requiring CDDB data.


pkgId: 3a3c5895bc8d4ef3ca8ff2160af4710a3aaf4a98d02e9359c5ba14ce19d28c72
name: cdargs
arch: src
version: 1.35
epoch: 0
release: 42.fc40
summary: The shell cd with bookmarks and browser
url: http://www.skamphausen.de/cgi-bin/ska/CDargs/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cdargs-1.35-42.fc40.src.rpm
checksum_type: sha256
description:
  Enables the user to quickly change working directory by navigating cd arguments
  and expanding the shell built-in cd with bookmarks and browser.


pkgId: aad61a4585eced203d77fdbb6387aa509646f26b173cbd1c7ab4b515f974f870
name: cdbs
arch: src
version: 0.4.166
epoch: 0
release: 4.fc40
summary: Common build system for Debian packages
url: https://salsa.debian.org/build-common-team/cdbs
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cdbs-0.4.166-4.fc40.src.rpm
checksum_type: sha256
description:
  This package contains the Common Debian Build System, an abstract build system
  based on Makefile inheritance which is completely extensible and overridable.
  In other words, CDBS provides a sane set of default rules upon which packages
  can build; any or all rules may be overridden as needed.


pkgId: 6d8dec3dcd579afd4b2e069639494bb1c3b76a4fe2fe2ee51c65da3d6679e287
name: cddlib
arch: src
version: 0.94m
epoch: 1
release: 16.fc40
summary: A library for generating all vertices in convex polyhedrons
url: https://people.inf.ethz.ch/fukudak/cdd_home/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cddlib-0.94m-16.fc40.src.rpm
checksum_type: sha256
description:
  The C-library cddlib is a C implementation of the Double Description
  Method of Motzkin et al. for generating all vertices (i.e. extreme points)
  and extreme rays of a general convex polyhedron in R^d given by a system
  of linear inequalities:

     P = { x=(x1, ..., xd)^T :  b - A∙x ≥ 0 }

  where A is a given m×d real matrix, b is a given m-vector
  and 0 is the m-vector of all zeros.

  The program can be used for the reverse operation (i.e. convex hull
  computation). This means that one can move back and forth between
  an inequality representation and a generator (i.e. vertex and ray)
  representation of a polyhedron with cdd. Also, cdd can solve a linear
  programming problem, i.e. a problem of maximizing and minimizing
  a linear function over P.


pkgId: 3743253fb68875f28a485681bbeac2a974e04068a65085a41f0c3298ca7c8d16
name: cdist
arch: src
version: 7.0.0
epoch: 0
release: 8.fc40
summary: Usable configuration management
url: https://www.cdi.st/
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cdist-7.0.0-8.fc40.src.rpm
checksum_type: sha256
description:
  cdist is a usable configuration management system. It adheres to the KISS
  principle and is being used in small up to enterprise grade environments. cdist
  is an alternative to other configuration management systems.


pkgId: d6ca2c2e46a71a23e0cd70e74cfa151fafdade607d1b02056235e7441b88992f
name: cdk
arch: src
version: 5.0.20230201
epoch: 0
release: 7.fc40
summary: Curses Development Kit
url: http://invisible-island.net/cdk/
rpm_license: BSD with advertising
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cdk-5.0.20230201-7.fc40.src.rpm
checksum_type: sha256
description:
  CDK stands for "Curses Development Kit". It contains a large number of ready
  to use widgets which facilitate the speedy development of full screen curses
  programs.


pkgId: 1f87b53b35d94ba4575cdd4f1ed5f7e66b074906d88242407e9db618eb1aee0d
name: cdlabelgen
arch: src
version: 4.3.0
epoch: 0
release: 20.fc40
summary: Generates frontcards and traycards for inserting in CD jewelcases
url: http://www.aczoom.com/tools/cdinsert/
rpm_license: BSD with advertising
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cdlabelgen-4.3.0-20.fc40.src.rpm
checksum_type: sha256
description:
  Cdlabelgen is a utility which generates frontcards and traycards (in
  PostScript(TM) format) for CD jewelcases.


pkgId: 17685958b07c87e8b3ef4d22a8721031230d6cb0613ead5c668267ca50c666c4
name: cdrdao
arch: src
version: 1.2.5
epoch: 0
release: 9.fc40
summary: Writes audio CD-Rs in disk-at-once (DAO) mode
url: http://cdrdao.sourceforge.net/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cdrdao-1.2.5-9.fc40.src.rpm
checksum_type: sha256
description:
  Cdrdao records audio CD-Rs in disk-at-once (DAO) mode, based on a
  textual description of the CD contents. Recording in DAO mode writes
  the complete disc (lead-in, one or more tracks, and lead-out) in a
  single step. DAO allows full control over the length and the contents
  of pre-gaps, the pause areas between tracks.


pkgId: 31dc9a5c5b9a6927ab7cb973e443a5b820efd17ce11a730c37141d04b3f6e691
name: cdsclient
arch: src
version: 3.84
epoch: 0
release: 18.fc40
summary: Tools to query databases at CDS
url: http://cdsarc.u-strasbg.fr/doc/cdsclient.html
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cdsclient-3.84-18.fc40.src.rpm
checksum_type: sha256
description:
  The cdsclient package is a set of C and shell routines which can be built on
  Unix stations or PCs running Linux, which once compiled allow to query some
  databases located at CDS or on mirrors over the network.

  The cdsclient package includes two generic query programs:
  - vizquery, a program to remotely query VizieR. It connects the VizieR server
    via the HTTP protocol (requires an access to the port 80)
  - find_cats, a program for fast access to large surveys from a list of
    positions, via a dedicated client (requires an access to the port 1660)
    Specific programs like find2mass or finducac3 are connecting directly to one
    of the very large surveys available from CDS (a very large survey has 107
    or more rows).


pkgId: ca5fe85ca3a2ffb6708048e3afc9aaa9c451973fa3ece1216efbbc3f45343ac2
name: cdw
arch: src
version: 0.8.1
epoch: 0
release: 5.fc40
summary: Front-end for tools used for burning data CD/DVD
url: http://cdw.sourceforge.net/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cdw-0.8.1-5.fc40.src.rpm
checksum_type: sha256
description:
  cdw is a ncurses based front-end for some command-line tools used for burning
  data CD and DVD discs and for related tasks. The tools are: cdrecord/wodim,
  mkisofs/genisoimage, growisofs, dvd+rw-mediainfo, dvd+rw-format, xorriso.
  cdw is able to rip tracks from your audio CD to raw audio files.
  Limited support for copying content of data CD and DVD discs to image files
  is also provided. cdw can verify correctness of writing ISO9660 image to
  CD or DVD disc using md5sum or some of  programs that verifies SHA hashes.


pkgId: 89c3dd9c014c0d38a6f9c427632f5e160ce020bb8d64ccc732d2ec695234554f
name: cegui06
arch: src
version: 0.6.2
epoch: 0
release: 45.fc40
summary: CEGUI library 0.6 for apps which need this specific version
url: http://www.cegui.org.uk
rpm_license: MIT and LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cegui06-0.6.2-45.fc40.src.rpm
checksum_type: sha256
description:
  Crazy Eddie's GUI System is a free library providing windowing and widgets for
  graphics APIs / engines. This package contains the older version 0.6 for
  apps which cannot be easily ported to 0.7. As such this version has been build
  without additional image codecs or xml parsers.


pkgId: 01411104a98ce37182d4e0481839142cc4580ad31f85b597c8713e0ea2cf8c2a
name: cellwriter
arch: src
version: 1.3.6
epoch: 0
release: 9.fc40
summary: Grid-entry natural handwriting input panel
url: https://github.com/risujin/cellwriter/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cellwriter-1.3.6-9.fc40.src.rpm
checksum_type: sha256
description:
  CellWriter is a grid-entry natural handwriting input panel. As
  you write characters into the cells, your writing is instantly
  recognized at the character level. When you press 'Enter' on the
  panel, the input you entered is sent to the currently focused
  application as if typed on the keyboard.

  Works well on a Wacom tablet, TabletPC, or any device with a stylus.


pkgId: 91bc521b04a0b84122a35c5b3df8b79db5595cdf7102c039742ae2756c73e5e8
name: celt051
arch: src
version: 0.5.1.3
epoch: 0
release: 28.fc40
summary: An audio codec for use in low-delay speech and audio communication
url: http://www.celt-codec.org/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/celt051-0.5.1.3-28.fc40.src.rpm
checksum_type: sha256
description:
  CELT (Constrained Energy Lapped Transform) is an ultra-low delay audio
  codec designed for realtime transmission of high quality speech and audio.
  This is meant to close the gap between traditional speech codecs
  (such as Speex) and traditional audio codecs (such as Vorbis).

  The CELT bitstream format is not yet stable, this package is a special
  version of 0.5.1 that has the same bitstream format, but symbols and files
  renamed from 'celt*' to 'celt051*' so that it is parallel installable with
  the normal celt for packages requiring this particular bitstream format.


pkgId: 9f4e9155ad02c33cfd7f4c8f853495e78f7c4e885474fd67e66ed859eb981efb
name: centerim
arch: src
version: 4.22.10
epoch: 1
release: 44.fc40
summary: Text mode menu- and window-driven IM
url: http://www.centerim.org/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/centerim-4.22.10-44.fc40.src.rpm
checksum_type: sha256
description:
  CenterIM is a text mode menu- and window-driven IM interface that supports
  the ICQ2000, Yahoo!, MSN, AIM TOC, IRC, Gadu-Gadu and Jabber protocols.
  Internal RSS reader and a client for LiveJournal are provided.


pkgId: df3fac76bb5ec9abbf90f0c6f3373a1abd3a93cae8e165be501c92e88ea859a0
name: cepces
arch: src
version: 0.3.9
epoch: 0
release: 1.fc40
summary: Certificate Enrollment through CEP/CES
url: https://github.com/openSUSE/cepces
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cepces-0.3.9-1.fc40.src.rpm
checksum_type: sha256
description:
  cepces is an application for enrolling certificates through CEP and CES.
  It requires certmonger to operate.

  Only simple deployments using Microsoft Active Directory Certificate Services
  have been tested.


pkgId: ebe6a81b07b7964b16f43d2f259e11adaa5b5bb6cec9dc652220d72eee0ea8ad
name: certmonger
arch: src
version: 0.79.19
epoch: 0
release: 5.fc40
summary: Certificate status monitor and PKI enrollment client
url: http://pagure.io/certmonger/
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/certmonger-0.79.19-5.fc40.src.rpm
checksum_type: sha256
description:
  Certmonger is a service which is primarily concerned with getting your
  system enrolled with a certificate authority (CA) and keeping it enrolled.


pkgId: 5929c78380ceb79c30d8195e022e436bb130ef668b05cc55712a9c76530f4be9
name: certwatch
arch: src
version: 1.2
epoch: 0
release: 15.fc40
summary: SSL/TLS certificate expiry warning generator
url: https://github.com/notroj/certwatch
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/certwatch-1.2-15.fc40.src.rpm
checksum_type: sha256
description:
  This package provides a utility for generating warnings when SSL/TLS
  certificates are soon to expire.


pkgId: 0621cde8f94bcdf683dbdb7a078904cef5bf5d9aa090dbb23093a91bc77988be
name: cfdg
arch: src
version: 3.3
epoch: 0
release: 19.fc40
summary: Context Free Design Grammar
url: http://www.contextfreeart.org/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cfdg-3.3-19.fc40.src.rpm
checksum_type: sha256
description:
  Context Free is a program that generates images from written instructions
  called a grammar. The program follows the instructions in a few seconds to
  create images that can contain millions of shapes.


pkgId: ab7306101fce898728743c01bc41e7f22388ba96af9ea4b54b1714f7ef5c653b
name: cfitsio
arch: src
version: 4.4.0
epoch: 0
release: 2.fc40
summary: Library for manipulating FITS data files
url: http://heasarc.gsfc.nasa.gov/fitsio/
rpm_license: CFITSIO
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cfitsio-4.4.0-2.fc40.src.rpm
checksum_type: sha256
description:
  CFITSIO is a library of C and FORTRAN subroutines for reading and writing
  data files in FITS (Flexible Image Transport System) data format. CFITSIO
  simplifies the task of writing software that deals with FITS files by
  providing an easy to use set of high-level routines that insulate the
  programmer from the internal complexities of the FITS file format. At the
  same time, CFITSIO provides many advanced features that have made it the
  most widely used FITS file programming interface in the astronomical
  community.


pkgId: dbb6d0456c34d27b1af86904d42d1958b20a204905f7e56f815bbbd541556711
name: cflow
arch: src
version: 1.7
epoch: 0
release: 7.fc40
summary: Analyzes C files charting control flow within the program
url: http://www.gnu.org/software/cflow/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cflow-1.7-7.fc40.src.rpm
checksum_type: sha256
description:
  GNU cflow analyzes a collection of C source files and prints a graph,
  charting control flow within the program.

  GNU cflow is able to produce both direct and inverted flowgraphs for C
  sources. Optionally a cross-reference listing can be generated. Two
  output formats are implemented: POSIX and GNU (extended).


pkgId: 8740d29812fe2461de795eac93b6bae051317fa00ef005e58854edc11eb31d8c
name: cgdb
arch: src
version: 0.8.0
epoch: 0
release: 8.fc40
summary: CGDB is a curses-based interface to the GNU Debugger (GDB)
url: https://cgdb.github.io/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cgdb-0.8.0-8.fc40.src.rpm
checksum_type: sha256
description:
  CGDB is a curses-based interface to the GNU Debugger (GDB).
  The goal of CGDB is to be lightweight and responsive; not encumbered with
  unnecessary features.
  The interface is designed to deliver the familiar GDB text interface,
  with a split screen showing the source as it executes.
  The UI is modeled on the classic Unix text editor, vi.
  Those familiar with vi should feel right at home using CGDB.


pkgId: 4e9e61add461994c266ce30b2d5a226999cc17924937f302e4f4bcf3e2520a32
name: charliecloud
arch: src
version: 0.36
epoch: 0
release: 1.fc40
summary: Lightweight user-defined software stacks for high-performance computing
url: https://hpc.github.io/charliecloud/
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/charliecloud-0.36-1.fc40.src.rpm
checksum_type: sha256
description:
  Charliecloud uses Linux user namespaces to run containers with no privileged
  operations or daemons and minimal configuration changes on center resources.
  This simple approach avoids most security risks while maintaining access to
  the performance and functionality already on offer.

  Container images can be built using Docker or anything else that can generate
  a standard Linux filesystem tree.

  For more information: https://hpc.github.io/charliecloud


pkgId: be569ed75b67db6395986def87fa11072afb9d19160fa681f4140784f5ceda3a
name: check-create-certificate
arch: src
version: 0.5
epoch: 0
release: 27.20140409gitd0971ba.fc40
summary: A non-interactive script that creates an SSL certificate if it does not exist
url: https://github.com/jdsn/check-create-certificate
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/check-create-certificate-0.5-27.20140409gitd0971ba.fc40.src.rpm
checksum_type: sha256
description:
  A script that checks for the existence of an SSL certificate
  or creates a new self signed one. It runs non-interactively and
  uses either predefined values or automatically guesses the best values.


pkgId: 58234e3fcb16aaddfbfc46239cc74437bf4393e93b30afda547fd3db7217dcbe
name: check_postgres
arch: src
version: 2.25.0
epoch: 0
release: 10.fc40
summary: PostgreSQL monitoring script
url: https://bucardo.org/check_postgres/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/check_postgres-2.25.0-10.fc40.src.rpm
checksum_type: sha256
description:
  Script for checking the state of one or more Postgres databases and reporting
  back in a Nagios-friendly manner. It is also used for MRTG.


pkgId: 58a3879fcd239fd421ebe7873b5a5b1a27990c8a075b6b1968f47220d976e4ab
name: checkpolicy
arch: src
version: 3.6
epoch: 0
release: 3.fc40
summary: SELinux policy compiler
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/checkpolicy-3.6-3.fc40.src.rpm
checksum_type: sha256
description:
  Security-enhanced Linux is a feature of the Linux® kernel and a number
  of utilities with enhanced security functionality designed to add
  mandatory access controls to Linux.  The Security-enhanced Linux
  kernel contains new architectural components originally developed to
  improve the security of the Flask operating system. These
  architectural components provide general support for the enforcement
  of many kinds of mandatory access control policies, including those
  based on the concepts of Type Enforcement®, Role-based Access
  Control, and Multi-level Security.

  This package contains checkpolicy, the SELinux policy compiler.
  Only required for building policies.


pkgId: 29cd2329f5d0a562d55f269b5f78647c04361263e58f8a5654df7b25b3c9a6f2
name: checksec
arch: src
version: 2.6.0
epoch: 0
release: 8.fc40
summary: Tool to check system for binary-hardening
url: https://github.com/slimm609/checksec.sh
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/checksec-2.6.0-8.fc40.src.rpm
checksum_type: sha256
description:
  Modern Linux distributions offer some mitigation techniques to make it harder
  to exploit software vulnerabilities reliably. Mitigations such as RELRO,
  NoExecute (NX), Stack Canaries, Address Space Layout Randomization (ASLR) and
  Position Independent Executables (PIE) have made reliably exploiting any
  vulnerabilities that do exist far more challenging. The checksec script is
  designed to test what *standard* Linux OS and PaX (http://pax.grsecurity.net/)
  security features are being used.

  As of version 1.3 the script also lists the status of various Linux kernel
  protection mechanisms.

  checksec can check binary-files and running processes for hardening features.


pkgId: bfc63d288541c90bcc3386a2147d9c3da4265332608e095db30436e701375c0f
name: cheese
arch: src
version: 44.1
epoch: 2
release: 4.fc40
summary: Application for taking pictures and movies from a webcam
url: https://wiki.gnome.org/Apps/Cheese
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cheese-44.1-4.fc40.src.rpm
checksum_type: sha256
description:
  Cheese is a Photobooth-inspired GNOME application for taking pictures and
  videos from a webcam. It can also apply fancy graphical effects.


pkgId: 253984ddc1ffe272677f53242ec7a0cfeb1576c4675d72e8ce234f2b4379ee0c
name: chemical-mime-data
arch: src
version: 0.1.94
epoch: 0
release: 37.fc40
summary: Support for chemical/* MIME types
url: https://github.com/dleidert/chemical-mime
rpm_license: LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chemical-mime-data-0.1.94-37.fc40.src.rpm
checksum_type: sha256
description:
  A collection of data files which tries to give support for various chemical
  MIME types (chemical/*) on Linux/UNIX desktops. Chemical MIME's have been
  proposed in 1995, though it seems they have never been registered with IANA.


pkgId: 19755974f4a22c5adf071e05562cf2ab574ae4f8538e00da36ea472381e87456
name: chemtool
arch: src
version: 1.6.14
epoch: 0
release: 26.fc40
summary: A program for 2D drawing organic molecules
url: http://ruby.chemie.uni-freiburg.de/~martin/chemtool/chemtool.html
rpm_license: GPL-2.0-or-later AND LGPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chemtool-1.6.14-26.fc40.src.rpm
checksum_type: sha256
description:
  Chemtool is a program for drawing organic molecules easily and store them
  in a variety of output formats including as a X bitmap, Xfig, SVG or EPS
  file.  It runs under the X Window System using the GTK widget set.


pkgId: 39039fb8118c9341d3638c1c2dd29b935383bea576ae4102246c11042d78ae3a
name: chibi-scheme
arch: src
version: 0.10.0
epoch: 0
release: 5.fc40
summary: Minimal Scheme implementation for use as an extension language
url: http://synthcode.com/wiki/chibi-scheme
rpm_license: BSD-3-Clause AND MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chibi-scheme-0.10.0-5.fc40.src.rpm
checksum_type: sha256
description:
  Chibi-Scheme is a very small library intended for use as an extension
  and scripting language in C programs. In addition to support for
  lightweight VM-based threads, each VM itself runs in an isolated
  heap allowing multiple VMs to run simultaneously in different OS threads.

  The default language is R7RS Scheme, with support for all libraries.
  Support for additional languages such as JavaScript, Go, Lua and Bash
  are planned for future releases. Scheme is chosen as a substrate because
  its first class continuations and guaranteed tail-call optimization
  makes implementing other languages easy.

  Chibi-Scheme is known to work on 32 and 64-bit Linux, FreeBSD and OS X,
  Plan9, Windows (using Cygwin), iOS, and Emscripten.


pkgId: 33f6cdb348f52c497d40690d49cd010d78e61e32ce799dc8f4a78cba1c9751a0
name: chicken
arch: src
version: 5.3.0
epoch: 0
release: 6.fc40
summary: A practical and portable Scheme system
url: http://call-cc.org
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chicken-5.3.0-6.fc40.src.rpm
checksum_type: sha256
description:
  CHICKEN is a compiler for the Scheme programming language.
  CHICKEN produces portable, efficient C, supports almost all of the R5RS
  Scheme language standard, and includes many enhancements and extensions.


pkgId: e93b2d52cc67b88e3f6fb054dbcc04865aec205b4f25c00810c5c43e27d3b817
name: chipmunk
arch: src
version: 7.0.3
epoch: 0
release: 14.fc40
summary: Physics engine for 2D games
url: https://github.com/slembcke/Chipmunk2D/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chipmunk-7.0.3-14.fc40.src.rpm
checksum_type: sha256
description:
  Chipmunk is a 2D rigid body physics library distributed under the MIT license.
  Though not yet complete, it is intended to be fast, numerically stable, and
  easy to use.


pkgId: 6db1452c7812751cf1d6b3e2256c0cb63187231a2cf703ffcc01d70137c59b01
name: chkconfig
arch: src
version: 1.26
epoch: 0
release: 3.fc40
summary: A system tool for maintaining the /etc/rc*.d hierarchy
url: https://github.com/fedora-sysv/chkconfig
rpm_license: GPL-2.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chkconfig-1.26-3.fc40.src.rpm
checksum_type: sha256
description:
  Chkconfig is a basic system utility.  It updates and queries runlevel
  information for system services.  Chkconfig manipulates the numerous
  symbolic links in /etc/rc.d, to relieve system administrators of some
  of the drudgery of manually editing the symbolic links.


pkgId: 30d940a5e110f58ca80b7f8afb1eabc3c9df56144734fb2bc27d41dcfb8ef1df
name: chkrootkit
arch: src
version: 0.57
epoch: 0
release: 6.fc40
summary: Tool to locally check for signs of a rootkit
url: http://www.chkrootkit.org
rpm_license: BSD-2-Clause AND GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chkrootkit-0.57-6.fc40.src.rpm
checksum_type: sha256
description:
  chkrootkit is a tool to locally check for signs of a rootkit.
  It contains:

   * chkrootkit: shell script that checks system binaries for
     rootkit modification.
   * ifpromisc: checks if the network interface is in promiscuous mode.
   * chklastlog: checks for lastlog deletions.
   * chkwtmp: checks for wtmp deletions.
   * chkproc: checks for signs of LKM trojans.
   * chkdirs: checks for signs of LKM trojans.
   * strings: quick and dirty strings replacement.
   * chkutmp: checks for utmp deletions.


pkgId: a3ac78930de3e4a42d1af55e046523af145a7120fc758a19e2d9a2baf445a246
name: chmlib
arch: src
version: 0.40
epoch: 0
release: 32.fc40
summary: Library for dealing with ITSS/CHM format files
url: http://www.jedrea.com/chmlib/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chmlib-0.40-32.fc40.src.rpm
checksum_type: sha256
description:
  CHMLIB is a library for dealing with ITSS/CHM format files. Right now, it is
  a very simple library, but sufficient for dealing with all of the .chm files
  I've come across. Due to the fairly well-designed indexing built into this
  particular file format, even a small library is able to gain reasonably good
  performance indexing into ITSS archives.


pkgId: 0d18d11fd548b7bbf597fac4d87e428ecb6bffacd65043fe90a7777714615ff7
name: chntpw
arch: src
version: 1.00
epoch: 0
release: 13.140201.fc40
summary: Change passwords in Windows SAM files
url: http://pogostick.net/~pnh/ntpasswd/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chntpw-1.00-13.140201.fc40.src.rpm
checksum_type: sha256
description:
  This is a utility to (re)set the password of any user that has a valid
  (local) account on your Windows NT/2k/XP/Vista etc system. You do not
  need to know the old password to set a new one. It works offline, that
  is, you have to shutdown your computer and boot off a floppy disk or CD
  or another system. Will detect and offer to unlock locked or disabled
  out user accounts! There is also a registry editor and other registry
  utilities that works under Linux/Unix, and can be used for other things
  than password editing.


pkgId: 1421e7185db34e40f648d84df7126d628dbed6ccd8b52659453e42f8ce8c6e4e
name: chordii
arch: src
version: 4.5.3b
epoch: 0
release: 21.fc40
summary: Print songbooks (lyrics + chords)
url: http://www.chordii.org
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chordii-4.5.3b-21.fc40.src.rpm
checksum_type: sha256
description:
  chordii provides guitar players and other musicians with a tool to
  produce good looking, self-descriptive music sheets from text files.

  chordii reads text files in ChordPro format, containing the lyrics of
  songs, the chords to be played, their descriptions and some other
  optional data. It produces a PostScript document suitable for viewing
  and printing.

  chordii features include:
   - centered titles,
   - chord names above the words,
   - chord diagrams at the end of the songs,
   - multiple columns on a page,
   - multiple logical pages per physical pages (1, 2 or 4),
   - configurable fonts and sizes,
   - the complete ISO 8859-1 character set,
   - optionally, ISO 8859-2 character set,
   - chorus marking,
   - automated chord transposition,
   - songbook creation: typeset multiple songs with page numbers and a
     table of contents.

  For details on the ChordPro format, see http://www.chordpro.org .


pkgId: 00b25a38b0bf73159a51f3f8f7d010fa869196976b2c3ace74b0a6fbf541b290
name: chromiumos-platform
arch: src
version: 0~20240902git67bc17e
epoch: 0
release: 4
summary: ChromiumOS Platform
url: https://chromium.googlesource.com/chromiumos/platform2
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chromiumos-platform-0~20240902git67bc17e-4.src.rpm
checksum_type: sha256
description:
  This package provides the ChromiumOS platform, which includes daemons,
  programs, and libraries that were written specifically for ChromiumOS.


pkgId: 680b7c78c2139190e017943e3d7d09dc1c63b7104a43184439e37d78244a0150
name: chrpath
arch: src
version: 0.16
epoch: 0
release: 23.fc40
summary: Modify rpath of compiled programs
url: https://chrpath.alioth.debian.org/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/chrpath-0.16-23.fc40.src.rpm
checksum_type: sha256
description:
  chrpath allows you to modify the dynamic library load path (rpath) of
  compiled programs.  Currently, only removing and modifying the rpath
  is supported.


pkgId: 7d9805404c49b5c9e82eaf1c0110c644923a75d3fca4efe43b30bb2eabfac680
name: cifs-utils
arch: src
version: 7.0
epoch: 0
release: 4.fc40
summary: Utilities for mounting and managing CIFS mounts
url: http://linux-cifs.samba.org/cifs-utils/
rpm_license: GPL-3.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cifs-utils-7.0-4.fc40.src.rpm
checksum_type: sha256
description:
  The SMB/CIFS protocol is a standard file sharing protocol widely deployed
  on Microsoft Windows machines. This package contains tools for mounting
  shares on Linux using the SMB/CIFS protocol. The tools in this package
  work in conjunction with support in the kernel to allow one to mount a
  SMB/CIFS share onto a client and use it as if it were a standard Linux
  file system.


pkgId: 532934a8b0a55f39d8885bd6f068091878436a67574eed1ecd446780bf4f5d65
name: cim-schema
arch: src
version: 2.54.1
epoch: 0
release: 4.fc40
summary: Common Information Model (CIM) Schema
url: http://www.dmtf.org/
rpm_license: LicenseRef-DMTF
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cim-schema-2.54.1-4.fc40.src.rpm
checksum_type: sha256
description:
  Common Information Model (CIM) is a model for describing overall
  management information in a network or enterprise environment. CIM
  consists of a specification and a schema. The specification defines the
  details for integration with other management models. The schema
  provides the actual model descriptions.



  Authors:
  --------
      DTMF <http://www.dmtf.org/about/contact>


pkgId: 427c9ffd78baf7bf6145d8b9a46c1d9bc40689628fa1c268cea93b613419d5c7
name: cinnamon-desktop
arch: src
version: 6.0.0
epoch: 0
release: 4.fc40
summary: Shared code among cinnamon-session, nemo, etc
url: https://github.com/linuxmint/cinnamon-desktop
rpm_license: GPLv2+ and LGPLv2+ and MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cinnamon-desktop-6.0.0-4.fc40.src.rpm
checksum_type: sha256
description:
  The cinnamon-desktop package contains an internal library
  (libcinnamon-desktop) used to implement some portions of the CINNAMON
  desktop, and also some data files and other shared components of the
  CINNAMON user environment.


pkgId: 780931b3efcd82adeff742790fa627c786bee1a2eec7883ce4b4f239362d7e88
name: cinnamon-menus
arch: src
version: 6.0.0
epoch: 0
release: 3.fc40
summary: A menu system for the Cinnamon project
url: https://github.com/linuxmint/cinnamon-menus
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cinnamon-menus-6.0.0-3.fc40.src.rpm
checksum_type: sha256
description:
  cinnamon-menus is an implementation of the draft "Desktop
  Menu Specification" from freedesktop.org. This package
  also contains the Cinnamon menu layout configuration files,
  .directory files and assorted menu related utility programs,
  Python bindings, and a simple menu editor.


pkgId: d3e4488aa4332400bde72b9498c0642c0b97707810fe77a1215d5128e3f7b7d7
name: ciphertest
arch: src
version: 0.2.2
epoch: 0
release: 17.fc40
summary: An SSL cipher checker
url: https://github.com/OpenSecurityResearch/ciphertest
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ciphertest-0.2.2-17.fc40.src.rpm
checksum_type: sha256
description:
  cipherTest.sh is an SSL cipher checker in that it uses gnutls, which has
  support for many more configurations than openssl. It tests potentially
  ~3,200 different configurations but does some pre-optimization so that
  it minimizes "failed" checks.


pkgId: eba886ba353b0ae66a8bdac91f67cd6dce0294707808a0af19ab8f00a602ddc7
name: ck
arch: src
version: 0.7.1
epoch: 0
release: 3.fc40
summary: Library for high performance concurrent programming
url: https://github.com/concurrencykit/ck
rpm_license: BSD-2-clause AND Apache-2.0 AND BSD-3-clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ck-0.7.1-3.fc40.src.rpm
checksum_type: sha256
description:
  Concurrency Kit provides a plethora of concurrency primitives, safe memory
  reclamation mechanisms and lock-less and lock-free data structures designed to
  aid in the design and implementation of high performance concurrent systems. It
  is designed to minimize dependencies on operating system-specific interfaces
  and most of the interface relies only on a strict subset of the standard
  library and more popular compiler extensions.


pkgId: caf74d9ab7f26102f486b254bd3b1145a9b4303a77b2a84409f5f1b4eb61d3c2
name: ckeditor
arch: src
version: 4.22.1
epoch: 0
release: 3.fc40
summary: WYSIWYG text editor to be used inside web pages
url: http://ckeditor.com/
rpm_license: GPLv2+ or LGPLv2+ or MPLv1.1
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ckeditor-4.22.1-3.fc40.src.rpm
checksum_type: sha256
description:
  CKEditor is a text editor to be used inside web pages. It's a WYSIWYG editor,
  which means that the text being edited on it looks as similar as possible to
  the results users have when publishing it. It brings to the web common editing
  features found on desktop editing applications like Microsoft Word and
  OpenOffice.


pkgId: 69b36bd55fecdf66f30fd0129e66132f9a3c1757150c4a4647189fe8823fb2c4
name: ckermit
arch: src
version: 9.0.302
epoch: 0
release: 34.fc40
summary: The quintessential all-purpose communications program
url: http://www.kermitproject.org/ck90.html
rpm_license: BSD-2-Clause AND BSD-2-Clause-Views AND BSD-3-Clause AND BSD-4-Clause-UC AND NTP AND X11
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ckermit-9.0.302-34.fc40.src.rpm
checksum_type: sha256
description:
  C-Kermit is a combined serial and network communication software
  package offering a consistent, medium-independent, cross-platform
  approach to connection establishment, terminal sessions, file transfer
  and management, character-set translation, and automation of
  communication tasks.


pkgId: 790cdcc7ca71a1a95f56fe116f5700089f1ed7823304dc73a23eba5fa3b35ea5
name: clamsmtp
arch: src
version: 1.10
epoch: 0
release: 40.fc40
summary: A SMTP virus scanning system
url: http://memberwebs.com/stef/software/clamsmtp/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clamsmtp-1.10-40.fc40.src.rpm
checksum_type: sha256
description:
  ClamSMTP is an SMTP filter that allows you to check for
  viruses using the ClamAV anti-virus software. It accepts
  SMTP connections and forwards the SMTP commands and
  responses to another SMTP server. The 'DATA' email body
  is intercepted and scanned before forwarding.

  It aims to be lightweight, reliable, and simple
  rather than have a myriad of options. It's written in C
  without major dependencies. If you need more options then
  you could use something big like AMaViS which is written
  in PERL and can do almost anything.

  Written with the Postfix mail server in mind it can be
  configured as a Postfix Content Filter. It can also
  be used as a transparent proxy to filter an entire network's
  SMTP traffic at the router.


pkgId: 2b72fbd85f3a54c09bdfc846a5e95cb6fe80d31be33dd61cda13f9f1e0fae19e
name: clamz
arch: src
version: 0.5
epoch: 0
release: 29.fc40
summary: Amazon Downloader
url: https://code.google.com/archive/p/clamz/
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clamz-0.5-29.fc40.src.rpm
checksum_type: sha256
description:
  Clamz is a little command-line program to download MP3 files from
  Amazon.com's music store.  It is intended to serve as a substitute
  for Amazon's official MP3 Downloader, which is not free software (and
  therefore is only available in binary form for a limited set of
  platforms.)  Clamz can be used to download either individual songs or
  complete albums that you have purchased from Amazon.


pkgId: 48837d157599185900149c0a94dabbe45b02fe3ed5830977efa1da27a9273ed9
name: clanbomber
arch: src
version: 1.05
epoch: 0
release: 46.fc40
summary: Lay bombs and Blast the other players of the field game using ClanLib
url: http://clanbomber.sourceforge.net/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clanbomber-1.05-46.fc40.src.rpm
checksum_type: sha256
description:
  ClanBomber is a free multiplayer game, using ClanLib, where the "purpose"
  is to Blast the other players of the gamefield by laying bombs close to them.
  While at the same time you must avoid being blown up yourself. It
  is fully playable and features Computer controlled bombers, however, it is
  recommended to play ClanBomber with friends (3-8 players are really fun).


pkgId: 1abb71f9d4b4b9356c32080ae4abba9e8c258d8ac21e7157b9dddb47a185d6a3
name: clapper
arch: src
version: 0.5.2
epoch: 0
release: 6.fc40
summary: GStreamer-based GNOME media player built using GJS and GTK4
url: https://github.com/Rafostar/clapper
rpm_license: GPLv3+ and LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clapper-0.5.2-6.fc40.src.rpm
checksum_type: sha256
description:
  A GNOME media player built using GJS with GTK4 toolkit. The media player uses
  GStreamer as a media backend and renders everything via OpenGL.


pkgId: 5cc67c7a0ba858c0ebc7e551455d61bf1767d79dcf4b802384e5496117cf97be
name: claws-mail
arch: src
version: 4.2.0
epoch: 0
release: 3.fc40
summary: Email client and news reader based on GTK+
url: http://claws-mail.org
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/claws-mail-4.2.0-3.fc40.src.rpm
checksum_type: sha256
description:
  Claws Mail is an email client (and news reader), based on GTK+, featuring
  quick response, graceful and sophisticated interface, easy configuration,
  intuitive operation, abundant features, and extensibility.


pkgId: 4dc283271242feda7e44c4d793d06b061395db8abe4dbcefdfad8e04804603c2
name: cleanfeed
arch: src
version: 20020501
epoch: 0
release: 31.fc40
summary: A spam filter for Usenet news servers
url: http://www.bofh.it/~md/cleanfeed/
rpm_license: Artistic 2.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cleanfeed-20020501-31.fc40.src.rpm
checksum_type: sha256
description:
  Cleanfeed is an automatic spam filter for Usenet news servers and
  routers (INN, Cyclone, Typhoon, Breeze and NNTPRelay).  Cleanfeed
  looks for duplicated messages, repeated patterns, and known spamming
  sites and domains.  It can be configured to block binary posts to
  non-binary newsgroups, to cancel already-rejected articles, and to
  reject some spamming from local users.

  Install the cleanfeed package if you need a spam filter for a Usenet
  news server.


pkgId: edd2e2426d3e496c7734b01869968132c23389aedeb018775ae50341901bd0f8
name: clearlooks-compact-gnome-theme
arch: src
version: 1.5
epoch: 0
release: 28.fc40
summary: GNOME Desktop theme optimized for small displays
url: http://martin.ankerl.com/2007/11/04/clearlooks-compact-gnome-theme/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clearlooks-compact-gnome-theme-1.5-28.fc40.src.rpm
checksum_type: sha256
description:
  Compact version of Clearlooks theme, especially great on small screens like
  the Eee PC, or for intense applications like Eclipse.


pkgId: d621f78cc5ff18e6f30e7fabf800f59328b81432ce3ee091cc48b1cf62ff50ed
name: clide
arch: src
version: 0.9
epoch: 0
release: 35.20160305git11c0895.fc40
summary: Color and style highlighting program for text
url: http://suso.suso.org/xulu/Clide
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clide-0.9-35.20160305git11c0895.fc40.src.rpm
checksum_type: sha256
description:
  clide is a program that will colorize ASCII text on the command line using ANSI
  escape sequences and user defined and predefined expressions. Searches can
  include Perl Compatible Regular Expressions.


pkgId: 3206a1692b75abcf42d5851af1631ecae0fd49d3622bd42c69bc4098c05b1b7b
name: clinfo
arch: src
version: 3.0.23.01.25
epoch: 0
release: 4.fc40
summary: Enumerate OpenCL platforms and devices
url: https://github.com/Oblomov/clinfo
rpm_license: CC0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clinfo-3.0.23.01.25-4.fc40.src.rpm
checksum_type: sha256
description:
  A simple OpenCL application that enumerates all possible platform and
  device properties. Inspired by AMD's program of the same name, it is
  coded in pure C99 and it tries to output all possible information,
  including that provided by platform-specific extensions, and not to
  crash on platform-unsupported properties (e.g. 1.2 properties on 1.1
  platforms).


pkgId: 69ec5fd10fe9769ac1aea87f590cb103a0f3880a4c6d137f46d8634cfe20ea13
name: clingo
arch: src
version: 5.6.2
epoch: 0
release: 8.fc40
summary: A grounder and solver for logic programs
url: https://potassco.org/clingo/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clingo-5.6.2-8.fc40.src.rpm
checksum_type: sha256
description:
  Clingo is part of the Potassco project for Answer Set Programming
  (ASP). ASP offers a simple and powerful modeling language to describe
  combinatorial problems as logic programs. The clingo system then takes
  such a logic program and computes answer sets representing solutions
  to the given problem.


pkgId: de985b91f2c1c638c3350ab965646083bdedbe003ddd3b9705a0b7d60caf543d
name: clipit
arch: src
version: 1.4.5^20210513gite5fa64c
epoch: 0
release: 4.fc40
summary: A lightweight, fully featured GTK+ clipboard manager
url: https://github.com/CristianHenzel/ClipIt
rpm_license: GPL-3.0-or-later AND LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clipit-1.4.5^20210513gite5fa64c-4.fc40.src.rpm
checksum_type: sha256
description:
  ClipIt is a lightweight, fully featured GTK+ clipboard manager. It was forked
  from Parcellite, adding additional features and bug-fixes to the project.
  ClipIts main features are:
  * Save a history of your last copied items
  * Search through the history
  * Global hot-keys for most used functions
  * Execute actions with clipboard items
  * Exclude specific items from history


pkgId: 824a7c057cb061594e3486a07b47187d1b717af17770e6c0f08d2b5e4973fea9
name: clips
arch: src
version: 6.31
epoch: 0
release: 9.fc40
summary: Language for developing expert systems
url: http://clipsrules.sourceforge.net
rpm_license: MIT-0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clips-6.31-9.fc40.src.rpm
checksum_type: sha256
description:
  CLIPS (C Language Integrated Production System) is an expert system
  development tool which provides a complete environment for the
  construction of rule and/or object based expert systems.

  Created in 1985 by NASA at the Johnson Space Center, CLIPS is now
  widely used throughout the government, industry, and academia.

  This package provides the CLIPS command line environment and the clips
  library.


pkgId: 3970d62b1ebc6e1105dfa1e97efabb5d8b580871b0583de4d4186d9218a091b9
name: clipsmm
arch: src
version: 0.3.5
epoch: 0
release: 28.fc40
summary: C++ interface to the CLIPS expert system C library
url: http://clipsmm.sourceforge.net
rpm_license: GPL-3.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clipsmm-0.3.5-28.fc40.src.rpm
checksum_type: sha256
description:
  The clipsmm library provides a C++ interface to the CLIPS C library.

  CLIPS (C Language Integrated Production System) is an expert system
  development tool which provides a complete environment for the
  construction of rule and/or object based expert systems.

  Created in 1985 by NASA at the Johnson Space Center, CLIPS is now
  widely used throughout the government, industry, and academia.


pkgId: d138e2bc51ad50717ff642143ac57027a9e458c60926bf5e62c9d4c3aaf284c0
name: cliquer
arch: src
version: 1.22
epoch: 0
release: 8.fc40
summary: Find cliques in arbitrary weighted graphs
url: https://users.aalto.fi/~pat/cliquer.html
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cliquer-1.22-8.fc40.src.rpm
checksum_type: sha256
description:
  The main cliquer package contains a command-line interface to the
  cliquer library.  Note that the upstream binary name is "cl", which is
  too generic for Fedora.  Therefore, the binary is named "cliquer".


pkgId: eb8dd73d40dde16423bed5424d8244fa987fbdb82779de7f8edc87aa2f6d7244
name: clitest
arch: src
version: 0.5.0
epoch: 0
release: 4.fc40
summary: Command Line Tester
url: https://github.com/aureliojargas/clitest
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clitest-0.5.0-4.fc40.src.rpm
checksum_type: sha256
description:
  clitest is a portable POSIX shell script that performs automatic testing in \
  Unix command lines.

  It's the same concept as in Python's doctest module: you document both the \
  commands and their expected output, using the familiar interactive prompt \
  format, and a specialized tool tests them.


pkgId: e263531fa3b1289518c62e5d97aeac596328f1bc28ea38a64f7f64e60c6f2542
name: cln
arch: src
version: 1.3.6
epoch: 0
release: 5.fc40
summary: Class Library for Numbers
url: http://www.ginac.de/CLN/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cln-1.3.6-5.fc40.src.rpm
checksum_type: sha256
description:
  A collection of C++ math classes and functions, which are designed for
  memory and speed efficiency, and enable type safety and algebraic
  syntax.


pkgId: cf34d37e761a4fcbc5976a02ff59b5504f5872404f174852ff2f4043bef18adf
name: cloud-utils
arch: src
version: 0.33
epoch: 0
release: 7.fc40
summary: Cloud image management utilities
url: https://github.com/canonical/cloud-utils
rpm_license: GPL-3.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cloud-utils-0.33-7.fc40.src.rpm
checksum_type: sha256
description:
  This package provides a useful set of utilities for managing cloud images.

  The tasks associated with image bundling are often tedious and repetitive. The
  cloud-utils package provides several scripts that wrap the complicated tasks
  with a much simpler interface.


pkgId: aaa009808bb06971ed7ef27088ee506c9d8c92dd45a7c48ece7a27820fa4ba87
name: cloudy
arch: src
version: 17.03
epoch: 0
release: 6.fc40
summary: Spectral synthesis code to simulate conditions in interstellar matter
url: http://www.nublado.org/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cloudy-17.03-6.fc40.src.rpm
checksum_type: sha256
description:
  Most of the quantitative information we have about the cosmos comes from
  spectroscopy. In many cases the light we analyze was produced by atoms in
  the first generations of stars and galaxies.  The spectra are produced by
  dilute gas where such properties as the gas kinetic temperature, chemical
  state, level of ionization, and level populations, are determined by a
  host of microphysical processes rather than by a single temperature.
  Analytical solutions are seldom possible and computer solutions are
  needed to understand their physical properties. Numerical simulations make
  it possible to understand complex physical environments starting from
  first principles. Cloudy is designed to do exactly this.


pkgId: 989c472487f34eafa87cf6b9a4526e6fa8b11b5666b36ab2b3d4091e392702b2
name: clover2
arch: src
version: 11.0.0
epoch: 0
release: 6.fc40
summary: Yet another compiler language
url: https://github.com/ab25cq/clover2/wiki
rpm_license: GPL-2.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clover2-11.0.0-6.fc40.src.rpm
checksum_type: sha256
description:
  clover2 is a Ruby-like compiler language with static type like Java.
  This language consists of compilers and virtual machines like Java and C#.
  In order to compile, type checking can be done at compile time. In addition,
  it is designed to be able to use an easy-to-use library like Ruby.
  Regular expressions, lambda, closure etc are first class objects.


pkgId: 247cca4da924a0070bfcd6287eda417170dc8902043f70c2c6d0932ef1be4d3f
name: clustal-omega
arch: src
version: 1.2.4
epoch: 0
release: 19.fc40
summary: Clustal Omega is a command-line multiple sequence alignment tool
url: http://www.clustal.org/omega/clustal-omega-1.2.0.tar.gz
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clustal-omega-1.2.4-19.fc40.src.rpm
checksum_type: sha256
description:
  Clustal Omega is a command-line multiple sequence alignment tool.
  The tool is widely used in molecular biology for multiple alignment of
  both nucleic acid and protein sequences. Clustal Omega is the latest version
  in the clustal tools for the sequence alignment.


pkgId: ff3648172b71f3081a7f34e930af1fc88bce7e830ec6ee93ee814d4210699cea
name: clutter
arch: src
version: 1.26.4
epoch: 0
release: 13.fc40
summary: Open Source software library for creating rich graphical user interfaces
url: http://www.clutter-project.org/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clutter-1.26.4-13.fc40.src.rpm
checksum_type: sha256
description:
  Clutter is an open source software library for creating fast,
  visually rich graphical user interfaces. The most obvious example
  of potential usage is in media center type applications.
  We hope however it can be used for a lot more.


pkgId: 49648b217dc804897744c2f2d6b935f3cbb1e59f699f1f760c71d3692b365104
name: clutter-gst3
arch: src
version: 3.0.27
epoch: 0
release: 18.fc40
summary: GStreamer integration library for Clutter
url: https://developer.gnome.org/clutter-gst/stable/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clutter-gst3-3.0.27-18.fc40.src.rpm
checksum_type: sha256
description:
  Clutter is an open source software library for creating fast, visually
  rich and animated graphical user interfaces.

  Clutter GStreamer enables the use of GStreamer with Clutter.


pkgId: 2cecc3077dc2c03941d205232d4d9ec9d0be1f1607a1465d94d3c4052293d4a2
name: clutter-gtk
arch: src
version: 1.8.4
epoch: 0
release: 18.fc40
summary: A basic GTK clutter widget
url: http://www.clutter-project.org
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/clutter-gtk-1.8.4-18.fc40.src.rpm
checksum_type: sha256
description:
  clutter-gtk is a library which allows the embedding of a Clutter
  canvas (or "stage") into a GTK+ application, as well as embedding
  GTK+ widgets inside the stage.


pkgId: c5305f3540058293a49428eba1485f50e8cbac3620cb4bad39d159b6839a130c
name: cluttermm
arch: src
version: 1.17.3
epoch: 0
release: 23.fc40
summary: C++ interface for Clutter
url: http://www.gtkmm.org/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cluttermm-1.17.3-23.fc40.src.rpm
checksum_type: sha256
description:
  Cluttermm is a C++ interface for Clutter: a software library for creating
  fast, visually rich graphical user interfaces.


pkgId: 6a3657f6ed82693c55de00e292f2505a91b44d71bbd35406161db44630b1817a
name: cmconvert
arch: src
version: 1.9.6
epoch: 0
release: 29.fc40
summary: CacheMate import file converter
url: http://www.smittyware.com/palm/cachemate/tools.php
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cmconvert-1.9.6-29.fc40.src.rpm
checksum_type: sha256
description:
  This program is used to convert EasyGPS XML file formats (LOC and GPX) to
  a format that can be installed onto a Palm OS device and imported into
  CacheMate.  Options are also available to list waypoints contained in an
  XML file, and selectively convert specified waypoints.


pkgId: 7eb76ecb6a30cafa4453812fee5ec0f2b80544668dae763977727b24b4fde241
name: cmospwd
arch: src
version: 5.0
epoch: 0
release: 27.fc40
summary: BIOS password cracker utility
url: http://www.cgsecurity.org/wiki/CmosPwd
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cmospwd-5.0-27.fc40.src.rpm
checksum_type: sha256
description:
  CmosPwd decrypts password stored in cmos used to access BIOS SETUP.
  Works with the following BIOSes

      * ACER/IBM BIOS
      * AMI BIOS
      * AMI WinBIOS 2.5
      * Award 4.5x/4.6x/6.0
      * Compaq (1992)
      * Compaq (New version)
      * IBM (PS/2, Activa, Thinkpad)
      * Packard Bell
      * Phoenix 1.00.09.AC0 (1994), a486 1.03, 1.04, 1.10 A03, 4.05 rev 1.02.943,
        4.06 rev 1.13.1107
      * Phoenix 4 release 6 (User)
      * Gateway Solo - Phoenix 4.0 release 6
      * Toshiba
      * Zenith AMI

  With CmosPwd, you can also backup, restore and erase/kill cmos.


pkgId: 959ef6e8c2001b424dcaf41943558c5338c9aab3c47b6e4a7737855dbf4a1129
name: cmpfit
arch: src
version: 1.5
epoch: 0
release: 5.fc40
summary: A MINPACK-1 Least Squares Fitting Library in C
url: http://cow.physics.wisc.edu/~craigm/idl/cmpfit.html
rpm_license: BSD-2-Clause-FreeBSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cmpfit-1.5-5.fc40.src.rpm
checksum_type: sha256
description:
  CMPFIT uses the Levenberg-Marquardt technique to solve the least-squares
  problem. In its typical use, CMPFIT will be used to fit a user-supplied
  function (the "model") to user-supplied data points (the "data") by adjusting
  a set of parameters. CMPFIT is based upon MINPACK-1 (LMDIF.F) by More' and
  collaborators.


pkgId: 28ac2ab0c23907c974c5308b297e167e1a24caf0e69bf8c6aa917a4bdbce54c5
name: cmrt
arch: src
version: 1.0.6
epoch: 0
release: 22.fc40
summary: C for Media Runtime
url: https://github.com/intel/cmrt
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cmrt-1.0.6-22.fc40.src.rpm
checksum_type: sha256
description:
  Media GPU kernel manager for Intel G45 & HD Graphics family. Allows to
  interface between Intel GPU's driver and a host program through a high
  level language.


pkgId: c7d7b8c0e8890d18caf6f126c5d280276c870b3f6aaeee717521d350989dfa26
name: cntlm
arch: src
version: 0.92.3
epoch: 0
release: 28.fc40
summary: Fast NTLM authentication proxy with tunneling
url: http://cntlm.sourceforge.net/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cntlm-0.92.3-28.fc40.src.rpm
checksum_type: sha256
description:
  Cntlm is a fast and efficient NTLM proxy, with support for TCP/IP tunneling,
  authenticated connection caching, ACLs, proper daemon logging and behavior
  and much more. It has up to ten times faster responses than similar NTLM
  proxies, while using by orders or magnitude less RAM and CPU. Manual page
  contains detailed information.


pkgId: 89ef2bfae2b71837728abe8587a6035611294531ce8d723e11669055c0dd25f8
name: coan
arch: src
version: 6.0.1
epoch: 0
release: 33.fc40
summary: A command line tool for simplifying the pre-processor conditionals in source code
url: http://coan2.sourceforge.net/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/coan-6.0.1-33.fc40.src.rpm
checksum_type: sha256
description:
  coan (formerly sunifdef) is a software engineering tool for analyzing
  pre-processor-based configurations of C or C++ source code. Its principal use
  is to simplify a body of source code by eliminating any parts that are
  redundant with respect to a specified configuration.

  coan is most useful to developers of constantly evolving products
  with large code bases, where pre-processor conditionals are used to
  configure the feature sets, APIs or implementations of different
  releases. In these environments the code base steadily
  accumulates #ifdef-pollution as transient configuration options become
  obsolete. coan can largely automate the recurrent task of purging
  redundant #if-logic from the code.


pkgId: 63cb20af5e5df1a44f3b1e512359cdd0b3f7aa5629e83fc960fafc467ab777ea
name: cocot
arch: src
version: 20080315
epoch: 0
release: 30.fc40
summary: COde COnverter on Tty
url: http://vmi.jp/software/cygwin/cocot.html
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cocot-20080315-30.fc40.src.rpm
checksum_type: sha256
description:
  Cocot is a kanji code conversion program, running as a filter between
  a terminal (tty) and a process running on it.  Cocot can be used with
  ssh or telnet.


pkgId: 8ba44fb3cdf1cd61d1b5098475f23fc7790acb241bb963fe47223dcc7b083ea7
name: coeurl
arch: src
version: 0.3.0
epoch: 0
release: 7.fc40
summary: Simple async wrapper around CURL for C++
url: https://nheko.im/nheko-reborn/coeurl
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/coeurl-0.3.0-7.fc40.src.rpm
checksum_type: sha256
description:
  Simple library to do http requests asynchronously via CURL in C++.

  Based on the CURL-libevent example.


pkgId: d8955144702694154151e6dffd585faef6217f6dd07e785895fe23547b391de6
name: cogl
arch: src
version: 1.22.8
epoch: 0
release: 10.fc40
summary: A library for using 3D graphics hardware to draw pretty pictures
url: http://www.clutter-project.org/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cogl-1.22.8-10.fc40.src.rpm
checksum_type: sha256
description:
  Cogl is a small open source library for using 3D graphics hardware to draw
  pretty pictures. The API departs from the flat state machine style of
  OpenGL and is designed to make it easy to write orthogonal components that
  can render without stepping on each others toes.

  As well aiming for a nice API, we think having a single library as opposed
  to an API specification like OpenGL has a few advantages too; like being
  able to paper over the inconsistencies/bugs of different OpenGL
  implementations in a centralized place, not to mention the myriad of OpenGL
  extensions. It also means we are in a better position to provide utility
  APIs that help software developers since they only need to be implemented
  once and there is no risk of inconsistency between implementations.

  Having other backends, besides OpenGL, such as drm, Gallium or D3D are
  options we are interested in for the future.


pkgId: 3aa75d6922d1be3c08f37eb59c0634754b668f55f8ea51d581bb9b9fd3db5505
name: coin
arch: src
version: 1.3.0
epoch: 0
release: 15.fc40
summary: Track the virtual currencies in real world currency value
url: https://github.com/lainsce/coin
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/coin-1.3.0-15.fc40.src.rpm
checksum_type: sha256
description:
  Track the virtual currencies in real world currency value with this handy
  applet.

  - Choose which currency and virtual currency to use for tracking
  - Quit anytime with the shortcut Ctrl + Q
  - Move the applet by dragging it from anywhere in the window
  - Stays out of your way in the desktop


pkgId: 1f54b8a44e64fd3058eddd2b23466acb74762ba8ebbb0431c6a479aeeeb3a2c0
name: coin-or-CoinUtils
arch: src
version: 2.11.10
epoch: 0
release: 1.fc40
summary: Coin-or Utilities
url: https://github.com/coin-or/CoinUtils
rpm_license: EPL-2.0 AND EPL-1.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/coin-or-CoinUtils-2.11.10-1.fc40.src.rpm
checksum_type: sha256
description:
  CoinUtils (Coin-or Utilities) is an open-source collection of classes
  and functions that are generally useful to more than one COIN-OR project.
  These utilities include:

    * Vector classes
    * Matrix classes
    * MPS file reading
    * Comparing floating point numbers with a tolerance


pkgId: e580f3cee76b577650646fb22f2655169875b101a257eb18ad092d5d6803c912
name: coin-or-Data-Netlib
arch: src
version: 1.2.9
epoch: 0
release: 10.fc40
summary: COIN-OR Netlib models
url: https://www.coin-or.org/download/pkgsource/Data
rpm_license: EPL-1.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/coin-or-Data-Netlib-1.2.9-10.fc40.src.rpm
checksum_type: sha256
description:
  This package contains the COmputational INfrastructure for Operations
  Research (COIN-OR) models from netlib for testing.


pkgId: dff18722bc9fd53718fd14e72d54b50edd2a590416d43b30d588fbd2b7b9af5f
name: coin-or-Data-miplib3
arch: src
version: 1.2.8
epoch: 0
release: 10.fc40
summary: COIN-OR mixed integer library
url: https://www.coin-or.org/download/pkgsource/Data
rpm_license: EPL-1.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/coin-or-Data-miplib3-1.2.8-10.fc40.src.rpm
checksum_type: sha256
description:
  This package contains the COmputational INfrastructure for Operations
  Research (COIN-OR) mixed integer library.


pkgId: b826d93d349a0048708a50ce44c3afc5779bc2fb70c4bad8859c5f7a46cc1e0d
name: coldet
arch: src
version: 1.2
epoch: 0
release: 34.fc40
summary: 3D Collision Detection Library
url: http://coldet.sourceforge.net/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/coldet-1.2-34.fc40.src.rpm
checksum_type: sha256
description:
  This library is an effort to provide a free collision detection library for
  generic polyhedra. Its purpose is mainly for 3D games where accurate detection
  is needed between two non-simple objects.

  Features:
      * Works on any model, even polygon soups.
      * Uses bounding box hierarchies for fast detection.
      * Uses additional triangle intersection tests for 100% accuracy.
      * Provides (upon request) exact point of collision, plus the pair of
        triangles that collided.
      * Supports timeout setting, to limit detection time.
      * Model-Model collision test.
      * Ray-Model collision test.
      * Segment-Model collision test.
      * Sphere-Model collision test.
      * Ray-Sphere and Sphere-Sphere primitive collision tests.


pkgId: 9c59c8af5a23312293a8b97542862c58faae8c4e59a99919c36920c93b4739c4
name: colm
arch: src
version: 0.14.7
epoch: 0
release: 3.fc40
summary: Programming language designed for the analysis of computer languages
url: https://www.colm.net/open-source/colm/
rpm_license: MIT and LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/colm-0.14.7-3.fc40.src.rpm
checksum_type: sha256
description:
  Colm is a programming language designed for the analysis and transformation
  of computer languages. Colm is influenced primarily by TXL. It is
  in the family of program transformation languages.


pkgId: c723e2f70e193cfeac7fdbaeaf405d5e1427621313a4b9d1ad50d439405c980d
name: colord-gtk
arch: src
version: 0.3.1
epoch: 0
release: 1.fc40
summary: GTK+ 3 support library for colord
url: http://www.freedesktop.org/software/colord/
rpm_license: LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/colord-gtk-0.3.1-1.fc40.src.rpm
checksum_type: sha256
description:
  colord-gtk is a support library for colord and provides additional
  functionality that requires GTK+.


pkgId: 8b47d2219e3ed598e754d4c36f63300f2a01dfecb9811104c4b0b27068b8b4b7
name: colordiff
arch: src
version: 1.0.21
epoch: 0
release: 6.fc40
summary: Color terminal highlighter for diff files
url: http://www.colordiff.org/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/colordiff-1.0.21-6.fc40.src.rpm
checksum_type: sha256
description:
  Colordiff is a wrapper for diff and produces the same output but with
  pretty syntax highlighting.  Color schemes can be customized.


pkgId: 0b709153e3433e2867e90d03db6bbd8a79e2c4372d15eff039af27b139d9bc4a
name: colorgcc
arch: src
version: 1.4.5
epoch: 0
release: 23.fc40
summary: Script to colorize the compiler output
url: http://schlueters.de/colorgcc.html
rpm_license: GPL+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/colorgcc-1.4.5-23.fc40.src.rpm
checksum_type: sha256
description:
  Perl script written by Jamie Moyers to colorize the terminal output of C++, CC,
  CCACHE, G++, GCC so error messages can be found within longer compiler outputs.


pkgId: 1e37bad68930abea4979e3887993a9e000fbc9b85a883b45637d69d1b267de08
name: colrdx
arch: src
version: 1.02
epoch: 0
release: 30.fc40
summary: DX-cluster client with curses color support
url: http://pg4i.chronos.org.uk/linux/colrdx.html
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/colrdx-1.02-30.fc40.src.rpm
checksum_type: sha256
description:
  Colrdx is a simple client for amateur radio dx-clusters. In a split-screen
  display you can type commands for the cluster in the bottom part. Messages
  from the dx-cluster will appear in the main window. There is also a status
  line at the top with some basic information.


pkgId: 12a6f041af837ce214f7dc3dd609fef178df97ec836e496acf71b140cf7f789a
name: comic-neue-fonts
arch: src
version: 2.51
epoch: 0
release: 9.fc40
summary: A typeface family inspired by Comic Sans
url: http://comicneue.com/
rpm_license: OFL
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/comic-neue-fonts-2.51-9.fc40.src.rpm
checksum_type: sha256
description:
  Comic Neue is a font created by Craig Rozynski that takes inspiration
  from Comic Sans. It is perfect as a display face, for marking up comments,
  and writing passive aggressive office memos.


pkgId: 797d0538d28fedf9375ae1d85d00cb437525f651d413fe44511b02465cbc0047
name: common-lisp-controller
arch: src
version: 7.4
epoch: 0
release: 28.fc40
summary: Common Lisp source and compiler manager
url: https://alioth.debian.org/projects/clc
rpm_license: LLGPL
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/common-lisp-controller-7.4-28.fc40.src.rpm
checksum_type: sha256
description:
  This package helps installing Common Lisp sources and compilers.
  It creates a user-specific cache of compiled objects. When a library
  or an implementation is upgraded, all compiled objects in the cache
  are flushed. It also provides tools to recompile all libraries.


pkgId: 30fa592dac60e17600184177a7f05561af57c9c22938151f9237a128187b17f4
name: commoncpp2
arch: src
version: 1.8.1
epoch: 0
release: 31.fc40
summary: GNU Common C++ class framework
url: http://www.gnu.org/software/commoncpp/
rpm_license: GPLv2+ with exceptions
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/commoncpp2-1.8.1-31.fc40.src.rpm
checksum_type: sha256
description:
  GNU Common C++ is a portable and highly optimized class framework for writing
  C++ applications that need to use threads, sockets, XML parsing,
  serialization, config files, etc. This framework offers a class foundation
  that hides platform differences from your C++ application so that you need
  not write platform specific code. GNU Common C++ has been ported to compile
  natively on most platforms which support posix threads.


pkgId: d183acffe47be2aa59a6364293e1d17bff22bd68f6fc3b0f5f6627a70fe7d53d
name: compat-flex
arch: src
version: 2.5.4a
epoch: 0
release: 32.fc40
summary: Legacy version of flex, a tool for creating scanners
url: http://www.gnu.org/software/flex/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/compat-flex-2.5.4a-32.fc40.src.rpm
checksum_type: sha256
description:
  This is legacy version of flex, a program that generates scanners.
  Scanners are programs which can recognize lexical patterns in text.
  Flex takes pairs of regular expressions and C code as input and
  generates a C source file as output.  The output file is compiled and
  linked with a library to produce an executable.  The executable
  searches through its input for occurrences of the regular expressions.
  When a match is found, it executes the corresponding C code.  Flex was
  designed to work with both Yacc and Bison, and is used by many
  programs as part of their build process.

  You should install flex if you are going to use your system for
  application development.


pkgId: 59510c9191f92dc28c23e03240e749646334600ddbeb93f95563268508fbcdc9
name: compat-gdbm
arch: src
version: 1.14.1
epoch: 0
release: 20.fc40
summary: A GNU set of database routines which use extensible hashing
url: http://www.gnu.org/software/gdbm/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/compat-gdbm-1.14.1-20.fc40.src.rpm
checksum_type: sha256
description:
  This is package is used only for rebase of gdbm in Fedora.
  Don't use it!

  Gdbm is a GNU database indexing library, including routines which use
  extensible hashing.  Gdbm works in a similar way to standard UNIX dbm
  routines.  Gdbm is useful for developers who write C applications and
  need access to a simple and efficient database or who are building C
  applications which will use such a database.

  If you're a C developer and your programs need access to simple
  database routines, you should install gdbm.  You'll also need to
  install gdbm-devel.


pkgId: 9de6a93361b64e1e88681e011e41b348ccaa5d676f843bad660cbede6bd6c9c3
name: compat-guile18
arch: src
version: 1.8.8
epoch: 0
release: 44.fc40
summary: A GNU implementation of Scheme for application extensibility
url: http://www.gnu.org/software/guile/
rpm_license: LGPL-2.1-or-later AND GPL-2.0-or-later AND MIT AND BSD-4-Clause-UC
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/compat-guile18-1.8.8-44.fc40.src.rpm
checksum_type: sha256
description:
  GUILE (GNU's Ubiquitous Intelligent Language for Extension) is a library
  implementation of the Scheme programming language, written in C.  GUILE
  provides a machine-independent execution platform that can be linked in
  as a library during the building of extensible programs.

  Install the compat-guile18 package if you'd like to add extensibility to
  programs that you are developing.


pkgId: 66d9ace490d09c408e848cc0c95c78ebeeb7d704b961f345007755a5e4678bce
name: compat-readline5
arch: src
version: 5.2
epoch: 0
release: 48.fc40
summary: A library for editing typed command lines
url: http://cnswww.cns.cwru.edu/php/chet/readline/rltop.html
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/compat-readline5-5.2-48.fc40.src.rpm
checksum_type: sha256
description:
  The Readline library provides a set of functions that allow users to
  edit command lines. Both Emacs and vi editing modes are available. The
  Readline library includes additional functions for maintaining a list
  of previously-entered command lines for recalling or editing those
  lines, and for performing csh-like history expansion on previous
  commands.


pkgId: 19fe83d5ded2f90a3d529bf260554ee87f3f5b8e0a12ba9444152e0090965c31
name: compat-tolua++
arch: src
version: 1.0.93
epoch: 0
release: 20.fc40
summary: Lua-5.1 compatible version of tolua++ (C++ Lua integration)
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/compat-tolua++-1.0.93-20.fc40.src.rpm
checksum_type: sha256
description:
  This is a lua-5.1 compatible version of tolua++.

  tolua++ is an extended version of tolua, a tool to integrate C/C++ code with
  Lua. tolua++ includes new features oriented to C++.


pkgId: 57b471f45fca59f2f7db3ab9fa13c7200634b99e66861f0c24383006207c84b6
name: compface
arch: src
version: 1.5.2
epoch: 0
release: 39.fc40
summary: Library and tools for handling X-Face data
url: http://ftp.xemacs.org/pub/xemacs/aux/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/compface-1.5.2-39.fc40.src.rpm
checksum_type: sha256
description:
  This is the Compface image compression and decompression library and its
  user tools. Compface converts 48x48 .xbm format (X bitmap) images to a
  compressed format that can be placed in the X-Face: mail header. Some mail
  programs are able to display such images when opening messages.


pkgId: 55ec51924ab48b3f2b6c74944c29eb33831cbf1350fe7ea46d64c0306c746c3d
name: compiz-bcop
arch: src
version: 0.8.18
epoch: 1
release: 9.fc40
summary: Compiz option code generator
url: https://gitlab.com/compiz/compiz-bcop
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/compiz-bcop-0.8.18-9.fc40.src.rpm
checksum_type: sha256
description:
  BCOP is a code generator that provides an easy way to handle
  plugin options by generating parts of the plugin code directly
  from the xml metadata file.
  It is used for most of the Compiz Fusion plugins


pkgId: 3862b3c881252f301d47181577a64c02a482fd56f0c48b3c9aa79cf4f65397d0
name: composer
arch: src
version: 2.7.2
epoch: 0
release: 1.fc40
summary: Dependency Manager for PHP
url: https://getcomposer.org/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/composer-2.7.2-1.fc40.src.rpm
checksum_type: sha256
description:
  Composer helps you declare, manage and install dependencies of PHP projects,
  ensuring you have the right stack everywhere.

  Documentation: https://getcomposer.org/doc/


pkgId: 827216b82740e9f235d139d3f17d41854aea092f8d6445905ad9efe128719995
name: compsize
arch: src
version: 1.5
epoch: 0
release: 8.fc40
summary: Utility for measuring compression ratio of files on btrfs
url: https://github.com/kilobyte/compsize
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/compsize-1.5-8.fc40.src.rpm
checksum_type: sha256
description:
  compsize takes a list of files (given as arguments) on a btrfs filesystem and
  measures used compression types and effective compression ratio, producing
  a report.


pkgId: c3697f28f844b304fde8c5a8d67c3b41d4c08c3badcea2d2d9fdd95496831653
name: config-kernel
arch: src
version: 0.3
epoch: 0
release: 1.fc40
summary: An easy way to edit kernel configuration files and templates
url: https://github.com/pjps/config-kernel
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/config-kernel-0.3-1.fc40.src.rpm
checksum_type: sha256
description:
  config-kernel tool helps to edit kernel configuration files and templates.
  User can query, enable, disable or toggle CONFIG options via command line
  switch or an $EDITOR program, without worrying about option dependencies.


pkgId: 0e8313ecae6a2173517ec208867ff2c6709b5a5a7ef74eba8f2da5365aa05495
name: conman
arch: src
version: 0.3.1
epoch: 0
release: 3.fc40
summary: ConMan - The Console Manager
url: https://dun.github.io/conman/
rpm_license: GPL-3.0-or-later AND ISC
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/conman-0.3.1-3.fc40.src.rpm
checksum_type: sha256
description:
  ConMan is a serial console management program designed to support a large
  number of console devices and simultaneous users.  It currently supports
  local serial devices and remote terminal servers (via the telnet protocol).
  Its features include:

    - mapping symbolic names to console devices
    - logging all output from a console device to file
    - supporting monitor (R/O), interactive (R/W), and
      broadcast (W/O) modes of console access
    - allowing clients to join or steal console "write" privileges
    - executing Expect scripts across multiple consoles in parallel


pkgId: 8bd28390646e5924c7a77c52fab6b942cabb920663b1a77698a04e7964de0300
name: conmux
arch: src
version: 0.0
epoch: 0
release: 51.493svn.fc40
summary: ConMux - The Console Multiplexor
url: http://test.kernel.org/autotest/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/conmux-0.0-51.493svn.fc40.src.rpm
checksum_type: sha256
description:
  Conmux is a console management program designed to support a large
  number of console devices and simultaneous users.  It currently supports
  IBM's blade and hmc servers.

  Its features include:

    - driver interface abstracts how to connect to the console
    - helpers for dealing with autobooting
    - can support additional commands for dealing with power management
    - allows multiple clients to be connected to the same console


pkgId: 2491a5053d30ce85c2a338dd3aeb557536720a34f312e6cefd874b1b0990dcf9
name: connect-proxy
arch: src
version: 1.100
epoch: 0
release: 31.fc40
summary: SSH Proxy command helper
url: http://www.taiyo.co.jp/~gotoh/ssh/connect.html
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/connect-proxy-1.100-31.fc40.src.rpm
checksum_type: sha256
description:
  connect-proxy is the simple relaying command to make network connection via
  SOCKS and https proxy. It is mainly intended to be used as proxy command
  of OpenSSH. You can make SSH session beyond the firewall with this command.

  Features of connect-proxy are:

      * Supports SOCKS (version 4/4a/5) and https CONNECT method.
      * Supports NO-AUTH and USERPASS authentication of SOCKS
      * Partially supports telnet proxy (experimental).
      * You can input password from tty, ssh-askpass or environment variable.
      * Simple and general program independent from OpenSSH.
      * You can also relay local socket stream instead of standard I/O.


pkgId: c858791b8092ecc6da234a7cf5b7b832ee8960eb86b8c7e8c8f2efa5b7ce1e9a
name: console-setup
arch: src
version: 1.224
epoch: 0
release: 1.fc40
summary: Tools for configuring the console using X Window System key maps
url: http://packages.debian.org/cs/sid/console-setup
rpm_license: GPL-2.0-or-later AND MIT AND LicenseRef-Fedora-Public-Domain
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/console-setup-1.224-1.fc40.src.rpm
checksum_type: sha256
description:
  This package provides the console with the same keyboard configuration
  scheme that X Window System has. Besides the keyboard, the package configures
  also the font on the console.  It includes a rich collection of fonts and
  supports several languages that would be otherwise unsupported on the console
  (such as Armenian, Georgian, Lao and Thai).


pkgId: 9d0c2d3e9614916cbd024974e1eeedb415c6b60f53c7f8ae9c2b8dad04864af6
name: conspy
arch: src
version: 1.14
epoch: 0
release: 13.fc40
summary: Remote control for text mode virtual consoles
url: https://sourceforge.net/projects/conspy/
rpm_license: AGPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/conspy-1.14-13.fc40.src.rpm
checksum_type: sha256
description:
  Conspy allows a (possibly remote) user to see what is displayed on
  a Linux virtual console, and send keystrokes to it. It is rather
  like VNC, but where VNC takes control of a GUI conspy takes control
  of a text mode virtual console. Unlike VNC, conspy does not require
  a server to be installed prior to being used.


pkgId: 5b0fb89d69a1b53ee4aad2dd766f38248564cfdf298ad0ed28dcc5bef16c9e2c
name: container-exception-logger
arch: src
version: 1.0.3
epoch: 0
release: 12.fc40
summary: Logging from a container to a host
url: https://github.com/abrt/container-exception-logger
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/container-exception-logger-1.0.3-12.fc40.src.rpm
checksum_type: sha256
description:
  container-exception-logger is a tool designed to run inside of
  a container which is able to get its input outside of the container.


pkgId: ead5be461787dfe71ad6d29ac43a4fd7ad0acbd119af2c2be27c4e50b0654a17
name: container-storage-setup
arch: src
version: 0.11.0
epoch: 0
release: 15.dev.git413b408.fc40
summary: A simple service to setup container storage devices
url: https://github.com/projectatomic/container-storage-setup
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/container-storage-setup-0.11.0-15.dev.git413b408.fc40.src.rpm
checksum_type: sha256
description:
  This is a simple service to configure Container Runtimes to use an LVM-managed
  thin pool.  It also supports auto-growing both the pool as well
  as the root logical volume and partition table.


pkgId: 666fef34f48b1c615e055c241c232d55a01ffd6db9e0441f3707698e6519cdd2
name: contractor
arch: src
version: 0.3.5
epoch: 0
release: 16.fc40
summary: Desktop-wide extension service
url: https://github.com/elementary/contractor
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/contractor-0.3.5-16.fc40.src.rpm
checksum_type: sha256
description:
  An extension service that allows apps to use the exposed functionality
  of registered apps. This way, apps don't have to have the functions hard
  coded into them.


pkgId: c56ccc2a98f4f1b460ee08e5214d3521d83f25e840c54e81ae7af54eb15b4c5c
name: conu
arch: src
version: 0.7.1
epoch: 0
release: 21.fc40
summary: library which makes it easy to write tests for your containers
url: https://github.com/fedora-modularity/conu
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/conu-0.7.1-21.fc40.src.rpm
checksum_type: sha256
description:
  `conu` is a library which makes it easy to write tests for your containers
  and is handy when playing with containers inside your code.
  It defines an API to access and manipulate containers,
  images and provides more, very helpful functions.


pkgId: af01a30931b098839766d7b39aaaa8bf6eec626bf3ca27999c045c5a76d8e62c
name: convmv
arch: src
version: 2.05
epoch: 0
release: 15.fc40
summary: Convert filename encodings
url: http://j3e.de/linux/convmv
rpm_license: GPL-2.0-only or GPL-3.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/convmv-2.05-15.fc40.src.rpm
checksum_type: sha256
description:
  This package contains the tool convmv with which you can convert the encodings
  of filenames, e.g. from Latin1 to UTF-8.


pkgId: 8ac3ceef405224e9019ce233a5fd6ef1355a5266c2ea9186774e03ac6e39387e
name: cool-retro-term
arch: src
version: 1.2.0
epoch: 0
release: 6.fc40
summary: Terminal emulator mimicking a CRT display
url: https://github.com/Swordfish90/cool-retro-term
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cool-retro-term-1.2.0-6.fc40.src.rpm
checksum_type: sha256
description:
  cool-retro-term is a terminal emulator which tries to mimic the look and feel
  of the old cathode tube screens. It has been designed to be eye-candy,
  customizable, and reasonably lightweight.


pkgId: ef3a357d039b1275eae5189d9fa450e826b28b8b687ad22b78e2ef0c24b3dcb4
name: copr-keygen
arch: src
version: 1.92
epoch: 0
release: 1.fc40
summary: Part of Copr build system. Aux service that generate keys for signd
url: https://github.com/fedora-copr/copr
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/copr-keygen-1.92-1.fc40.src.rpm
checksum_type: sha256
description:
  COPR is lightweight build system. It allows you to create new project in WebUI,
  and submit new builds and COPR will create yum repository from latest builds.

  This package contains aux service that generate keys for package signing.


pkgId: 126137e70e371ed5972544cffa68323a3130f1d00a373397130c476e65d8f71e
name: copr-selinux
arch: src
version: 1.55
epoch: 0
release: 4.fc40
summary: SELinux module for COPR
url: https://github.com/fedora-copr/copr
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/copr-selinux-1.55-4.fc40.src.rpm
checksum_type: sha256
description:
  COPR is lightweight build system. It allows you to create new project in WebUI,
  and submit new builds and COPR will create yum repository from latest builds.

  This package include SELinux targeted module for COPR


pkgId: 3ad0424f3bc8100fdb5a1a6c6c734273146324cb16ecf005acca7c96d8df3e2a
name: copy-jdk-configs
arch: src
version: 4.1
epoch: 0
release: 5.fc40
summary: JDKs configuration files copier
url: https://pagure.io/copy_jdk_configs
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/copy-jdk-configs-4.1-5.fc40.src.rpm
checksum_type: sha256
description:
  Utility script to transfer JDKs configuration files between updates or for
  archiving. With script to fix incorrectly created rpmnew files


pkgId: 02c4f7cffc74ec31af4598cdbabdb5cd81c41eec601a8f86c1c396dcae367531
name: corkscrew
arch: src
version: 2.0
epoch: 0
release: 36.fc40
summary: Tool for tunneling SSH through HTTP proxies
url: http://freshmeat.sourceforge.net/projects/corkscrew
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/corkscrew-2.0-36.fc40.src.rpm
checksum_type: sha256
description:
  Corkscrew is a tool for tunneling SSH through HTTP proxies.

  It has been tested with the following HTTP proxies :
   * Gauntlet
   * CacheFlow
   * JunkBuster
   * Apache mod_proxy


pkgId: 9eb6261cfc42cf30c86a4f2f47250eaab342081b33d99a540e78df6909de0c67
name: corosync
arch: src
version: 3.1.8
epoch: 0
release: 3.fc40
summary: The Corosync Cluster Engine and Application Programming Interfaces
url: http://corosync.github.io/corosync/
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/corosync-3.1.8-3.fc40.src.rpm
checksum_type: sha256
description:
  This package contains the Corosync Cluster Engine Executive, several default
  APIs and libraries, default configuration files, and an init script.


pkgId: 309ca6b8da1ab27f719a52e1ea4d4e1d11ca21f37b99f7a89f9fc53f40cd7e1b
name: corosync-qdevice
arch: src
version: 3.0.3
epoch: 0
release: 5.fc40
summary: The Corosync Cluster Engine Qdevice
url: https://github.com/corosync/corosync-qdevice
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/corosync-qdevice-3.0.3-5.fc40.src.rpm
checksum_type: sha256
description:
  This package contains the Corosync Cluster Engine Qdevice, script for creating
  NSS certificates and an init script.


pkgId: bbfb40c15db21279f91f30d333a73a5cfd065198da644d10f2677fda36f47ebc
name: corrida
arch: src
version: 0.96.11
epoch: 0
release: 35.fc40
summary: Application for archivation of meteor observations
url: http://corrida.pkim.org/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/corrida-0.96.11-35.fc40.src.rpm
checksum_type: sha256
description:
  Application was designed by Polish Fireball Center cooperators to ease
  archivation of meteor observations.


pkgId: 7d634aa3aebbc62f4ac29bebc6c70a7da0d1e8d9ce8b59b4ac3d0c501a084b5e
name: cowpatty
arch: src
version: 4.6
epoch: 0
release: 29.fc40
summary: WPA password cracker
url: http://wirelessdefence.org/Contents/coWPAttyMain.htm
rpm_license: GPLv2 and BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cowpatty-4.6-29.fc40.src.rpm
checksum_type: sha256
description:
  Cowpatty is designed to audit the pre-shared key (PSK) selection for WPA
  networks based on the TKIP protocol. It can perform both dictionary and
  computed rainbow table attacks.


pkgId: 0c48c31211e28c4828e4b97e39bd1b18f8ceec8ee5dfe05bd500ccc3e858a66b
name: cowsay
arch: src
version: 3.7.0
epoch: 0
release: 12.fc40
summary: Configurable speaking/thinking cow
url: https://github.com/cowsay-org/cowsay
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cowsay-3.7.0-12.fc40.src.rpm
checksum_type: sha256
description:
  cowsay is a configurable talking cow, written in Perl.  It operates
  much as the figlet program does, and it is written in the same spirit
  of silliness.
  It generates ASCII pictures of a cow with a message. It can also generate
  pictures of other animals.


pkgId: c9160e2031562e4f2b4abd42db4187a8c743ec19537836fd59d5823e4ba52943
name: cowsay-beefymiracle
arch: src
version: 1.0
epoch: 0
release: 27.fc40
summary: Cowsay file for the Beefy Miracle
url: http://rrix.fedorapeople.org/beefsay
rpm_license: CC-BY-SA
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cowsay-beefymiracle-1.0-27.fc40.src.rpm
checksum_type: sha256
description:
  Provides a cowsay file for His Holiness the Beefy Miracle. It can be invoked
  using cowsay -f beefymiracle, or aliased appropriately.


pkgId: 519af99242c0404ad27bd19e5b442464048a29255a44c277a7ce39c0374d49e2
name: cpdup
arch: src
version: 1.18
epoch: 0
release: 17.fc40
summary: Filesystem mirroring utility
url: http://apollo.backplane.com/FreeSrc/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cpdup-1.18-17.fc40.src.rpm
checksum_type: sha256
description:
  The cpdup utility makes an exact mirror copy of the source in the
  destination, creating and deleting files and directories as necessary.
  UTimes, hardlinks, softlinks, devices, permissions, and flags are
  mirrored.  By default, cpdup asks for confirmation if any file or
  directory needs to be removed from the destination and does not copy
  files which it believes to have already been synchronized (by
  observing that the source and destination file’s size and mtimes
  match).  cpdup does not cross mount points in either the source or the
  destination.  As a safety measure, cpdup refuses to replace a
  destination directory with a file.


pkgId: 9e5eb8b19a7cbb9160e2c22e63715f2adfc3c2dca3016608ba063dd9094bcc46
name: cpipe
arch: src
version: 3.0.1
epoch: 0
release: 31.fc40
summary: Counting pipe
url: http://developer.berlios.de/projects/cpipe
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cpipe-3.0.1-31.fc40.src.rpm
checksum_type: sha256
description:
  Cpipe copies its standard input to its standard output while measuring
  the time it takes to read an input buffer and write an output
  buffer. Statistics of average throughput and the total amount of bytes
  copied are printed to the standard error output.


pkgId: 180976b9802fd81c336710c78e4a0f05a4ec95f5779b47f3462a60e06ecd3ac5
name: cpmtools
arch: src
version: 2.23
epoch: 0
release: 6.fc40
summary: Programs for accessing CP/M disks
url: http://www.moria.de/~michael/cpmtools/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cpmtools-2.23-6.fc40.src.rpm
checksum_type: sha256
description:
  This package allows to access CP/M file systems similar to the well-known
  mtools package, which accesses MSDOS file systems. I use it for file
  exchange with a Z80-PC simulator, but it works on floppy devices as well.


pkgId: 8f47b2d389bc626bcfb9b30e384c7963592bf92e9ad9f3ec13efaf9fd8181360
name: cppi
arch: src
version: 1.18
epoch: 0
release: 22.fc40
summary: C preprocessor directive indenter
url: http://savannah.gnu.org/projects/cppi/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cppi-1.18-22.fc40.src.rpm
checksum_type: sha256
description:
  cppi indents the C preprocessor directives to reflect their nesting and ensures
  that there is exactly one space character between each #if, #elif, #define
  directive and the following token.


pkgId: 1a3a3ce505a03217e47eb1d243a62f656be16a218b12cb64a15ec0e6695680ee
name: cpptest
arch: src
version: 1.1.2
epoch: 0
release: 24.fc40
summary: A portable and powerful and simple unit testing framework for C++
url: http://cpptest.sourceforge.net/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cpptest-1.1.2-24.fc40.src.rpm
checksum_type: sha256
description:
  CppTest is a portable and powerful, yet simple, unit testing framework
  for handling automated tests in C++. The focus lies on usability and
  extendability.


pkgId: 54b53e9ac1fbffabcaa8867e69322804e96fd4330a99eb0f7b321c03aa5207ff
name: cppunit
arch: src
version: 1.15.1
epoch: 0
release: 19.fc40
summary: C++ unit testing framework
url: https://www.freedesktop.org/wiki/Software/cppunit/
rpm_license: LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cppunit-1.15.1-19.fc40.src.rpm
checksum_type: sha256
description:
  CppUnit is the C++ port of the famous JUnit framework for unit testing.
  Test output is in XML for automatic testing and GUI based for supervised
  tests.


pkgId: 77f86a66b79ae965d35cc576ec0074ca6dbd0f9e55208e895cb75625cb043f95
name: cproto
arch: src
version: 4.7v
epoch: 0
release: 3.fc40
summary: Generates function prototypes and variable declarations from C code
url: http://invisible-island.net/
rpm_license: Public Domain
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cproto-4.7v-3.fc40.src.rpm
checksum_type: sha256
description:
  Cproto generates function prototypes and variable declarations from C
  source code. Cproto can also convert function definitions between the
  old style and the ANSI C style. This conversion will overwrite the
  original files, however, so be sure to make a backup copy of your
  original files in case something goes wrong. Cproto uses a Yacc
  generated parser, so it should not be confused by complex function
  definitions as much as other prototype generators.


pkgId: 58eabed4e3ce3b224bc43bf1f73bb52281a260be9d41c63338a27688f6f4c1bf
name: cptutils
arch: src
version: 1.77
epoch: 0
release: 1.fc40
summary: Utilities to manipulate and translate color gradients
url: http://soliton.vm.bytemark.co.uk/pub/jjg/en/code/cptutils.html
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cptutils-1.77-1.fc40.src.rpm
checksum_type: sha256
description:
  The cptutils package contains a number of utilities for the manipulation of
  color gradients; mainly for translating between different formats. Formats
  supported include ggr (GIMP gradient), cpt (GMT color palette table),
  avl (Arcview Legend), lut (xmedcon), svg, and version 3 of the grd format.

  The cptutils package was written to aid the construction of the cpt archive
  cpt-city http://soliton.vm.bytemark.co.uk/pub/cpt-city where thousands of
  gradients can be downloaded.


pkgId: f289a7d494b58fe4aa673aca9ab3a076f2f2491d202be5d026339ede1c86f99f
name: cpufetch
arch: src
version: 1.05
epoch: 0
release: 1.fc40
summary: Simple tool for determining CPU architecture
url: https://github.com/Dr-Noob/cpufetch
rpm_license: GPL-2.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cpufetch-1.05-1.fc40.src.rpm
checksum_type: sha256
description:
  cpufetch is a simple, yet fancy, CPU architecture fetching tool.
  It currently supports x86_64 CPUs (both Intel and AMD), ARM, and PowerPC.


pkgId: e932b66976a4953a221ebd5e911dd1741c4569f85264b6aa4da4df987738fd9b
name: cpuid
arch: src
version: 20230614
epoch: 0
release: 4.fc40
summary: Dumps information about the CPU(s)
url: http://www.etallen.com/cpuid.html
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cpuid-20230614-4.fc40.src.rpm
checksum_type: sha256
description:
  cpuid dumps detailed information about x86 CPU(s) gathered from the CPUID
  instruction, and also determines the exact model of CPU(s). It supports Intel,
  AMD, and VIA CPUs, as well as older Transmeta, Cyrix, UMC, NexGen, and Rise
  CPUs.


pkgId: 31286e2371b862d56288124b79432fa0d78df6c467bc59ef4f7f7fb06eacca59
name: cpulimit
arch: src
version: 0.2
epoch: 1
release: 21.20151118gitf4d2682.fc40
summary: CPU Usage Limiter for Linux
url: https://github.com/opsengine/cpulimit
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cpulimit-0.2-21.20151118gitf4d2682.fc40.src.rpm
checksum_type: sha256
description:
  cpulimit is a simple program which attempts to limit the CPU usage of a process
  (expressed in percentage, not in CPU time). This is useful to control batch
  jobs, when you don't want them to eat too much CPU. It does not act on the nice
  value or other scheduling priority stuff, but on the real CPU usage. Also, it
  is able to adapt itself to the overall system load, dynamically and quickly.


pkgId: 1a6273813add0ec83ef8968d4f89c40c91a89da7b489dc02d6fee719417ee6ed
name: crack
arch: src
version: 5.0a
epoch: 0
release: 45.fc40
summary: Password cracker
url: https://dropsafe.crypticide.com/alecm/software/crack/c50-faq.html
rpm_license: Artistic clarified
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/crack-5.0a-45.fc40.src.rpm
checksum_type: sha256
description:
  Crack is a password guessing program that is designed to quickly locate
  insecurities in Unix (or other) password files by scanning the contents of a
  password file, looking for users who have misguidedly chosen a weak login
  password.

  This package creates a group named "crack" and the Crack program puts all
  its results in the /var/lib/crack/run directory, which belongs to that group.
  Only users in the crack group can use this package.


pkgId: 73e3819f3f1e0f8c96a517c6ea7464df16a7c51535402a11e0fa7887d7d7e62c
name: crack-attack
arch: src
version: 1.1.14
epoch: 0
release: 52.fc40
summary: Puzzle action game
url: http://www.nongnu.org/crack-attack/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/crack-attack-1.1.14-52.fc40.src.rpm
checksum_type: sha256
description:
  A puzzle/action game in which you rush to eliminate colored blocks
  before they fill your screen. Particularly clever eliminations cause
  garbage to clutter your opponent's screen. Who will survive the
  longest!? Playable both online and off.


pkgId: 615c2ef5eafcdf964bee589b435d91047ad3a17710f22a4f174f33a16e0afb47
name: cracklib
arch: src
version: 2.9.11
epoch: 0
release: 5.fc40
summary: A password-checking library
url: https://github.com/cracklib/cracklib
rpm_license: LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cracklib-2.9.11-5.fc40.src.rpm
checksum_type: sha256
description:
  CrackLib tests passwords to determine whether they match certain
  security-oriented characteristics, with the purpose of stopping users
  from choosing passwords that are easy to guess. CrackLib performs
  several tests on passwords: it tries to generate words from a username
  and gecos entry and checks those words against the password; it checks
  for simplistic patterns in passwords; and it checks for the password
  in a dictionary.

  CrackLib is actually a library containing a particular C function
  which is used to check the password, as well as other C
  functions. CrackLib is not a replacement for a passwd program; it must
  be used in conjunction with an existing passwd program.

  Install the cracklib package if you need a program to check users'
  passwords to see if they are at least minimally secure. If you install
  CrackLib, you will also want to install the cracklib-dicts package.


pkgId: b3b607fa68968ced5370ba872ffe6fd686b64b4260842006e0a6c5c75822a1c4
name: crash
arch: src
version: 8.0.4
epoch: 0
release: 4.fc40
summary: Kernel analysis utility for live systems, netdump, diskdump, kdump, LKCD or mcore dumpfiles
url: https://crash-utility.github.io
rpm_license: GPL-3.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/crash-8.0.4-4.fc40.src.rpm
checksum_type: sha256
description:
  The core analysis suite is a self-contained tool that can be used to
  investigate either live systems, kernel core dumps created from the
  netdump, diskdump and kdump packages from Red Hat Linux, the mcore kernel patch
  offered by Mission Critical Linux, or the LKCD kernel patch.


pkgId: 02378dd79cc1f40a9f0a9467cc771f40d4541882d57cd2d6471126471c987b8c
name: create-fake-rpm
arch: src
version: 5
epoch: 0
release: 5.fc40
summary: Generate fake (S)RPM
url: https://github.com/xsuchy/create-fake-rpm
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/create-fake-rpm-5-5.fc40.src.rpm
checksum_type: sha256
description:
  A tool to generate an (s)rpm with faked provides.

  It may be useful when you install some library/module/application manually -
  without having an RPM package.

  E.g., when you

      pip install somepackage

  And when some RPM package `Requires: python-somepackage` then /usr/bin/rpm
  refuses to install such package, because `python-somepackage` is not present
  on your system.

  RPMDB does not know what you know. So you can run:

      create-fake-rpm --build python-somepackage python3dist(somepackage)

  This create package `fake-python-somepackage-0-0.noarch.rpm` which provides:
  "python-somepackage" and "python3dist(somepackage)".
  You can install it using:

      dnf install fake-python-somepackage-0-0.noarch.rpm


pkgId: 58f5fc3c5cf575031b581d0899201eb5a16e9d194569b39096ff9a5677ff0acb
name: createrepo_c
arch: src
version: 1.0.4
epoch: 0
release: 1.fc40
summary: Creates a common metadata repository
url: https://github.com/rpm-software-management/createrepo_c
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/createrepo_c-1.0.4-1.fc40.src.rpm
checksum_type: sha256
description:
  C implementation of Createrepo.
  A set of utilities (createrepo_c, mergerepo_c, modifyrepo_c)
  for generating a common metadata repository from a directory of
  rpm packages and maintaining it.


pkgId: 66401e5edc2c772e1296e44f1468ec7602a65bcc1f5cfdb0272993f0f9baf0d4
name: credslayer
arch: src
version: 0.1.2
epoch: 0
release: 13.fc40
summary: Extract credentials and other details from network captures
url: https://github.com/ShellCode33/CredSLayer
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/credslayer-0.1.2-13.fc40.src.rpm
checksum_type: sha256
description:
  CredSLayer goal is to look for credentials and other useful stuff in network
  captures. Two modes are available, pcap scanning and active processing. The
  latest listens for packets on a chosen interface and dynamically extracts
  everything it can.


pkgId: 44fb5ebefaf9ede5993306024cd736307707ea4142eadde2cff31630ddd70527
name: criu
arch: src
version: 3.19
epoch: 0
release: 4.fc40
summary: Tool for Checkpoint/Restore in User-space
url: http://criu.org/
rpm_license: GPL-2.0-only AND LGPL-2.1-only AND MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/criu-3.19-4.fc40.src.rpm
checksum_type: sha256
description:
  criu is the user-space part of Checkpoint/Restore in User-space
  (CRIU), a project to implement checkpoint/restore functionality for
  Linux in user-space.


pkgId: db302fdb0d0b49da03bfd44b322d07b7ab5baaad0f2f84679462e26b2f171bd4
name: crm114
arch: src
version: 0
epoch: 0
release: 30.20100106.fc40
summary: Controllable Regex Mutilator: multi-method content classifier and filter
url: http://crm114.sourceforge.net/
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/crm114-0-30.20100106.fc40.src.rpm
checksum_type: sha256
description:
  CRM114 is a system to examine incoming e-mail, system log streams,
  data files or other data streams, and to sort, filter, or alter the
  incoming files or data streams according to the user's wildest
  desires. Criteria for categorization of data can be by satisfaction of
  regexes, by sparse binary polynomial matching with a Bayesian Chain
  Rule evaluator, or by other means.


pkgId: 28ba15f673a4e0e715d0fe743f2c302a2e19d310b9c198cf5deb62c56f1e55a1
name: cronie
arch: src
version: 1.7.1
epoch: 0
release: 1.fc40
summary: Cron daemon for executing programs at set times
url: https://github.com/cronie-crond/cronie
rpm_license: GPL-2.0-or-later AND BSD-3-Clause AND BSD-2-Clause AND ISC AND LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cronie-1.7.1-1.fc40.src.rpm
checksum_type: sha256
description:
  Cronie contains the standard UNIX daemon crond that runs specified programs at
  scheduled times and related tools. It is a fork of the original vixie-cron and
  has security and configuration enhancements like the ability to use pam and
  SELinux.


pkgId: 63103fe0f51295f3f4e7f109b97fc0ffe5dfd257ccaa1434e8a75a748fc46c09
name: cronolog
arch: src
version: 1.6.2
epoch: 0
release: 39.fc40
summary: Web log rotation program for Apache
url: http://cronolog.org/
rpm_license: ASL 1.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cronolog-1.6.2-39.fc40.src.rpm
checksum_type: sha256
description:
  cronolog is a simple filter program that reads log file entries from
  standard input and writes each entry to the output file specified
  by a filename template and the current date and time. When the
  expanded filename changes, the current file is closed and a new one
  opened. cronolog is intended to be used in conjunction with a Web server,
  such as Apache, to split the access log into daily or monthly logs.


pkgId: 23021483b0561cdad0b5a726fa0ac4aaf87a0662194a5c110db760fd2cb2858b
name: crontabs
arch: src
version: 1.11^20190603git9e74f2d
epoch: 0
release: 3.fc40
summary: Root crontab files used to schedule the execution of programs
url: https://github.com/cronie-crond/crontabs
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/crontabs-1.11^20190603git9e74f2d-3.fc40.src.rpm
checksum_type: sha256
description:
  This package is used by Fedora mainly for executing files by cron.

  The crontabs package contains root crontab files and directories.
  You will need to install cron daemon to run the jobs from the crontabs.
  The cron daemon such as cronie or fcron checks the crontab files to
  see when particular commands are scheduled to be executed.  If commands
  are scheduled, it executes them.

  Crontabs handles a basic system function, so it should be installed on
  your system.


pkgId: bbf0f6b4205f47ae5d0952bb74b8a8ca57180fe008e62bed16f07bf5d86c9379
name: crossguid
arch: src
version: 0
epoch: 0
release: 0.23.20160908gitfef89a4.fc40
summary: Lightweight cross platform C++ GUID/UUID library
url: https://github.com/graeme-hill/crossguid/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/crossguid-0-0.23.20160908gitfef89a4.fc40.src.rpm
checksum_type: sha256
description:
  CrossGuid is a minimal, cross platform, C++ GUID library. It uses the best
  native GUID/UUID generator on the given platform and has a generic class for
  parsing, stringifying, and comparing IDs.


pkgId: e38a202ba3d0c6384eb39fa42602b29de5868b843e3de630ee4f6fad4d89613f
name: cscope
arch: src
version: 15.9
epoch: 0
release: 21.fc40
summary: C source code tree search and browse tool
url: http://cscope.sourceforge.net
rpm_license: BSD and GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cscope-15.9-21.fc40.src.rpm
checksum_type: sha256
description:
  cscope is a mature, ncurses based, C source code tree browsing tool.  It
  allows users to search large source code bases for variables, functions,
  macros, etc, as well as perform general regex and plain text searches.
  Results are returned in lists, from which the user can select individual
  matches for use in file editing.


pkgId: fbf723c4a4d378096b9029270edefc679a17fcf3cb144737424d70f4290e48be
name: cstream
arch: src
version: 3.2.1
epoch: 0
release: 10.fc40
summary: General-purpose stream-handling tool
url: http://www.cons.org/cracauer/cstream.html
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cstream-3.2.1-10.fc40.src.rpm
checksum_type: sha256
description:
  cstream filters data streams, much like the UNIX tool dd(1).

  It has a more traditional commandline syntax, support for precise
  bandwidth limiting and reporting and support for FIFOs.

  Data limits and throughput rate calculation will work for files > 4 GB.


pkgId: cbed70994e492d5ebda2abe76197d63a946098a8f9362fce61d801b237883f01
name: ctags
arch: src
version: 6.0.0
epoch: 0
release: 5.fc40
summary: A C programming language indexing and/or cross-reference tool
url: https://ctags.io/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ctags-6.0.0-5.fc40.src.rpm
checksum_type: sha256
description:
  Ctags generates an index (or tag) file of C language objects found in
  C source and header files.  The index makes it easy for text editors or
  other utilities to locate the indexed items.  Ctags can also generate a
  cross reference file which lists information about the various objects
  found in a set of C language files in human readable form.  Exuberant
  Ctags improves on ctags because it can find all types of C language tags,
  including macro definitions, enumerated values (values inside enum{...}),
  function and method definitions, enum/struct/union tags, external
  function prototypes, typedef names and variable declarations.  Exuberant
  Ctags is far less likely to be fooled by code containing #if preprocessor
  conditional constructs than ctags.  Exuberant ctags supports output of
  Emacs style TAGS files and can be used to print out a list of selected
  objects found in source files.

  Install ctags if you are going to use your system for C programming.


pkgId: a58bbb684a77eca6450a14b59ac030ad26f71b2f2dd6955d0b7b8df3e810c97e
name: ctan-cm-lgc-fonts
arch: src
version: 0.5
epoch: 0
release: 41.fc40
summary: CM-LGC Type1 fonts
url: http://www.ctan.org/tex-archive/fonts/ps-type1/cm-lgc
rpm_license: GPLv2+ with exceptions
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ctan-cm-lgc-fonts-0.5-41.fc40.src.rpm
checksum_type: sha256
description:
  The CM-LGC PostScript Type 1 fonts are converted from the METAFONT
  sources of the Computer Modern font families. CM-LGC supports the T1, T2A,
  LGR, and TS1 encodings, i.e. Latin, Cyrillic, and Greek.


pkgId: bcf813be2bedf517e82b0745822eb77c59c35cf92ef70d7499bf357afe68a4bc
name: ctan-kerkis-fonts
arch: src
version: 2.0
epoch: 0
release: 47.fc40
summary: Kerkis Type 1 fonts
url: http://www.ctan.org/pkg/kerkis
rpm_license: LPPL
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ctan-kerkis-fonts-2.0-47.fc40.src.rpm
checksum_type: sha256
description:
  Kerkis type 1 fonts for LaTeX.  These fonts are particularly useful
  for typesetting Greek. The Greek repertoire includes full support for
  polytonic Greek, Greek numerals, and double forms of several letters
  that occur in variant forms.


pkgId: 7a15f08d3cbf08da4f48b712052909372792b529aed5fab6da0e169b9e60b18c
name: ctemplate
arch: src
version: 2.4
epoch: 0
release: 10.fc40
summary: A simple but powerful template language for C++
url: https://github.com/olafvdspek/ctemplate
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ctemplate-2.4-10.fc40.src.rpm
checksum_type: sha256
description:
  CTemplate is a simple but powerful template language for C++. It
  emphasizes separating logic from presentation: it is impossible to
  embed application logic in this template language.


pkgId: a046a60b334456a13d91b1e61292517c5d5e5b2f9b04f853951167b3eb9bc2d2
name: ctpl
arch: src
version: 0.3.4
epoch: 0
release: 18.fc40
summary: Template library and engine written in C
url: http://ctpl.tuxfamily.org/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ctpl-0.3.4-18.fc40.src.rpm
checksum_type: sha256
description:
  CTPL is a template library written in C. It allows fast and easy parsing of
  templates from many sources (including in-memory data and local and remote
  streaming, thanks to GIO) and fine control over template parsing environment.

  CTPL has following features:
  * It is a library, then it can be easily used from programs
  * Separated lexer and parser
  * It is written in portable C
  * Simple syntax
  * Fast and strict parsing
  * Possible in-memory parsing, allowing non-file data parsing and avoiding
    I/O-latency, through GIO's GMemoryInputStream and GMemoryOutputStream


pkgId: 049fa2dc84498eb857ccc688e0f652fb20e11364726432ffbae61436b888e44d
name: cube
arch: src
version: 4.8.2
epoch: 0
release: 3.fc40
summary: CUBE Uniform Behavioral Encoding generic presentation component
url: http://www.scalasca.org/software/cube-4.x/download.html
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cube-4.8.2-3.fc40.src.rpm
checksum_type: sha256
description:
  CUBE (CUBE Uniform Behavioral Encoding) is a generic presentation component
  suitable for displaying a wide variety of performance metrics for parallel
  programs including MPI and OpenMP applications. CUBE allows interactive
  exploration of a multidimensional performance space in a scalable fashion.
  Scalability is achieved in two ways: hierarchical decomposition of individual
  dimensions and aggregation across different dimensions. All performance
  metrics are uniformly accommodated in the same display and thus provide the
  ability to easily compare the effects of different kinds of performance
  behavior.


pkgId: ae35a101729b2a67bd1c40ebea75392223645dbe9249654fcb2ed73581d0ff65
name: cuetools
arch: src
version: 1.4.1
epoch: 0
release: 7.fc40
summary: Utilities to work with cue and TOC files
url: https://github.com/svend/cuetools
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cuetools-1.4.1-7.fc40.src.rpm
checksum_type: sha256
description:
  Cuetools is a set of utilities for working with cue files and TOC files.
  It includes programs for conversion between the formats, file renaming based
  on cue/TOC information, and track breakpoint printing.


pkgId: c73774ef172bf59aa1866d719a2caa63457a1c7d7222d387f223cad499e1b2dc
name: cups-pdf
arch: src
version: 3.0.1
epoch: 0
release: 21.fc40
summary: Extension for creating pdf-Files with CUPS
url: https://www.cups-pdf.de/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cups-pdf-3.0.1-21.fc40.src.rpm
checksum_type: sha256
description:
  "cups-pdf" is a backend script for use with CUPS - the "Common UNIX Printing
  System" (see more for CUPS under https://www.cups.org/).
  "cups-pdf" uses the ghostscript pdfwrite device to produce PDF Files.

  This version has been modified to store the PDF files on the Desktop of the
  user. This behavior can be changed by editing the configuration file.


pkgId: 4a872ec062cd88188c82f21d6ea642b707c80c5840d0e403ee647c674119be28
name: cups-pk-helper
arch: src
version: 0.2.7
epoch: 0
release: 7.fc40
summary: A helper that makes system-config-printer use PolicyKit
url: http://www.freedesktop.org/wiki/Software/cups-pk-helper/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cups-pk-helper-0.2.7-7.fc40.src.rpm
checksum_type: sha256
description:
  cups-pk-helper is an application which makes cups configuration
  interfaces available under control of PolicyKit.


pkgId: 39f3efbf6980120ecf87f07b20c84e1e28cf904626806d882ed463d00197961b
name: cups-x2go
arch: src
version: 3.0.1.3
epoch: 0
release: 19.fc40
summary: CUPS backend for printing from X2Go
url: http://www.x2go.org/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cups-x2go-3.0.1.3-19.fc40.src.rpm
checksum_type: sha256
description:
  X2Go is a server based computing environment with
      - session resuming
      - low bandwidth support
      - session brokerage support
      - client side mass storage mounting support
      - audio support
      - authentication by smartcard and USB stick

  CUPS backend for printing from X2Go.


pkgId: ac3d78e2817891e960b72a320fde2a021b0975611702bac8a4a8090c842a64dc
name: curblaster
arch: src
version: 1.14
epoch: 0
release: 6.fc40
summary: Sidescrolling shooter, carry the pods through the gate
url: https://codeberg.org/gwync/curblaster
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/curblaster-1.14-6.fc40.src.rpm
checksum_type: sha256
description:
  Grab pods and drop them in the gate, while fighting enemies in your way.
  Multiple weapons available.


pkgId: 2782e0b8051dd06fd4d84dbe09b19188b3ba05fbdcb04fe812adad504387137e
name: curlftpfs
arch: src
version: 0.9.2
epoch: 0
release: 37.fc40
summary: CurlFtpFS is a filesystem for accessing FTP hosts based on FUSE and libcurl
url: http://curlftpfs.sourceforge.net/
rpm_license: GPL+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/curlftpfs-0.9.2-37.fc40.src.rpm
checksum_type: sha256
description:
  CurlFtpFS is a filesystem for accessing FTP hosts based on FUSE and
  libcurl. It features SSL support, connecting through tunneling HTTP
  proxies, and automatically reconnecting if the server times out.


pkgId: 474dcb2d542da546239621469191e9d903e44e1e51df88b7038ab7c847b0de5a
name: cutecw
arch: src
version: 2.0
epoch: 0
release: 6.fc40
summary: Morse Code (CW) Training Software
url: http://www.hamtools.org/cutecw/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cutecw-2.0-6.fc40.src.rpm
checksum_type: sha256
description:
  Most morse code (CW) training requires you to learn everything at once
  without a training process. This application changes that and
  separates training into phases.


pkgId: c060138846b6fc4750819d88b916a8425e3b8a18d1a26dcc3ca32a019d36a956
name: cvechecker
arch: src
version: 4.0
epoch: 0
release: 11.fc40
summary: Tool for compare packages installed in your system with CVE database
url: https://github.com/sjvermeu/cvechecker
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cvechecker-4.0-11.fc40.src.rpm
checksum_type: sha256
description:
  The goal of cvechecker is to report about possible vulnerabilities on your
  system, by scanning a list of installed software and matching results with the
  CVE database.
  This is not a bullet-proof method and you will have many false positives
  (i.e.: vulnerability is fixed with a revision-release, but the tool isn't able
  to detect the revision itself).


pkgId: 509c9e30b3707f18588003375ddaba8d59abc3105adafc78db01b482ca61bda2
name: cvs2cl
arch: src
version: 2.73
epoch: 0
release: 28.fc40
summary: Generate ChangeLogs from CVS working copies
url: http://www.red-bean.com/cvs2cl/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cvs2cl-2.73-28.fc40.src.rpm
checksum_type: sha256
description:
  cvs2cl generates GNU-style ChangeLogs for a CVS working copy using the
  output of the "cvs log" command.  The script originally came from the
  open source CVS book at http://cvsbook.red-bean.com/.


pkgId: bd831a88193482f0e7e515b5c199299cdb9f7909964c22a2a4627eda0194b9a1
name: cvsps
arch: src
version: 2.2
epoch: 0
release: 0.35.b1.fc40
summary: Patchset tool for CVS
url: http://www.cobite.com/cvsps/
rpm_license: GPL+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cvsps-2.2-0.35.b1.fc40.src.rpm
checksum_type: sha256
description:
  CVSps is a program for generating 'patchset' information from a CVS
  repository.  A patchset in this case is defined as a set of changes
  made to a collection of files, and all committed at the same time
  (using a single 'cvs commit' command).  This information is valuable
  to seeing the big picture of the evolution of a cvs project.  While
  cvs tracks revision information, it is often difficult to see what
  changes were committed 'atomically' to the repository.


pkgId: df386616e27fb37d0ad56b8a1982f62875c5f64114220935f37c4527d0c70e46
name: cwm
arch: src
version: 7.1
epoch: 0
release: 7.fc40
summary: Calm Window Manager by OpenBSD project
url: https://github.com/chneukirchen/cwm
rpm_license: ISC and BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cwm-7.1-7.fc40.src.rpm
checksum_type: sha256
description:
  cwm (calm window manager) is a window manager for X11 which contains many
  features that concentrate on the efficiency and transparency of window
  management, while maintaining the simplest and most pleasant aesthetic.

  This package contains a Linux port of the official project, which changes the
  source for the port portion but doesn't touches the original functionality
  provided by the original OpenBSD's project.


pkgId: 00b7c2f2fd8beee8caab69cfec0cf337b2f1380759d9e5f8cab85cd59955f98a
name: cyrus-sasl
arch: src
version: 2.1.28
epoch: 0
release: 19.fc40
summary: The Cyrus SASL library
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD-Attribution-HPND
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/cyrus-sasl-2.1.28-19.fc40.src.rpm
checksum_type: sha256
description:
  The cyrus-sasl package contains the Cyrus implementation of SASL.
  SASL is the Simple Authentication and Security Layer, a method for
  adding authentication support to connection-based protocols.


pkgId: 4f5bfcbeba7670f13362cc31a0353f24ddc6e834ae9bfaa42ccff67e9431265d
name: d-din-fonts
arch: src
version: 1.0
epoch: 0
release: 15.fc40
summary: Datto D-DIN fonts
url: https://www.datto.com/fonts/d-din
rpm_license: OFL and CC-BY-SA
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/d-din-fonts-1.0-15.fc40.src.rpm
checksum_type: sha256
description:
  D-DIN is a sans-serif typeface family derived from German DIN
  (Deutsches Institut fuer Normung / German Institute for Standardization)
  font style.

  This font was commissioned by Datto, Inc. from Monotype and is used for
  the company's primary corporate typography.


pkgId: c41bb74b557199ae2f1eef1ec35af24a1e32401f1dd0aba079b4e618c36e0a2a
name: d-feet
arch: src
version: 0.3.16
epoch: 0
release: 11.fc40
summary: A powerful D-Bus Debugger
url: https://wiki.gnome.org/Apps/DFeet
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/d-feet-0.3.16-11.fc40.src.rpm
checksum_type: sha256
description:
  D-Feet is an easy to use D-Bus debugger.

  D-Bus is an RPC library used on the Desktop.  D-Feet can be used to inspect
  D-Bus objects of running programs and invoke methods on those objects.


pkgId: e7909db86e697ec7218194bf4f640299aa8d2b0a24b3f835eaee3f7df1ecf93c
name: d-spy
arch: src
version: 1.8.0
epoch: 0
release: 3.fc40
summary: D-Bus explorer
url: https://gitlab.gnome.org/GNOME/d-spy
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/d-spy-1.8.0-3.fc40.src.rpm
checksum_type: sha256
description:
  D-Spy is a tool to explore and test end-points and interfaces on the System or
  Session D-Bus. You can also connect to D-Bus peers by address. D-Spy was
  originally part of GNOME Builder.


pkgId: eff9301882ccf8f32bf0c0fb05b2a60c99a2ebbe898b3ddfd18117e077bb7aca
name: d52
arch: src
version: 3.4.1
epoch: 0
release: 24.fc40
summary: Disassemblers for 8051, 8048, and Z80 families
url: http://www.brouhaha.com/~eric/software/d52/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/d52-3.4.1-24.fc40.src.rpm
checksum_type: sha256
description:
  D52 is collection of disassemblers for the 8051, 8048, and Z80
  families of microcontrollers and microprocessors.


pkgId: 74f98fac067f751576a840b38f95081ae11b7d5e68379a5dac81097917010a0b
name: dSFMT
arch: src
version: 2.2.3
epoch: 0
release: 23.fc40
summary: Double precision SIMD-oriented Fast Mersenne Twister
url: http://www.math.sci.hiroshima-u.ac.jp/~%20m-mat/MT/SFMT/index.html
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dSFMT-2.2.3-23.fc40.src.rpm
checksum_type: sha256
description:
  The purpose of dSFMT is to speed up the generation by avoiding
  the expensive conversion of integer to double (floating point).
  dSFMT directly generates double precision floating point
  pseudo-random numbers which have the IEEE Standard for Binary
  Floating-Point Arithmetic (ANSI/IEEE Std 754-1985) format.

  dSFMT is only available on the CPUs which use IEEE 754 format
  double precision floating point numbers.

  dSFMT doesn't support integer outputs.
  dSFMT supports the output of double precision floating point
  pseudo-random numbers which distribute in the range of
  [1, 2), [0, 1), (0, 1] and (0, 1).
  And it also supports the various periods form 2607-1 to 2132049-1.


pkgId: 8e2b5825d7942271d104999723baa9269ec8617c991e7492ecbc742e9fba44cb
name: daa2iso
arch: src
version: 0.1.7e
epoch: 0
release: 27.fc40
summary: Program for converting DAA files to ISO
url: http://aluigi.altervista.org/mytoolz.htm
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/daa2iso-0.1.7e-27.fc40.src.rpm
checksum_type: sha256
description:
  DAA2ISO is an open source command-line/GUI tool for converting single and
  multipart DAA images to the original ISO format.

  The DAA image (Direct Access Archive) in fact is just a compressed
  CD/DVD ISO which can be created through the commercial program
  PowerISO.


pkgId: 9814be2c8c7b5864551b7cc06d7bad569b84d4a5f1b6dd1f3f16a7e459b0b165
name: daemonize
arch: src
version: 1.7.8
epoch: 0
release: 8.fc40
summary: Run a command as a Unix daemon
url: http://www.clapper.org/software/daemonize/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/daemonize-1.7.8-8.fc40.src.rpm
checksum_type: sha256
description:
  daemonize runs a command as a Unix daemon. As defined in W. Richard Stevens'
  1990 book, Unix Network Programming (Addison-Wesley, 1990), a daemon is "a
  process that executes 'in the background' (i.e., without an associated
  terminal or login shell) either waiting for some event to occur, or waiting
  to perform some specified task on a periodic basis." Upon startup, a typical
  daemon program will:

  - Close all open file descriptors (especially standard input, standard output
    and standard error)
  - Change its working directory to the root filesystem, to ensure that it
    doesn’t tie up another filesystem and prevent it from being unmounted
  - Reset its umask value
  - Run in the background (i.e., fork)
  - Disassociate from its process group (usually a shell), to insulate itself
    from signals (such as HUP) sent to the process group
  - Ignore all terminal I/O signals
  - Disassociate from the control terminal (and take steps not to reacquire one)
  - Handle any SIGCLD signals

  Most programs that are designed to be run as daemons do that work for
  themselves. However, you’ll occasionally run across one that does not.
  When you must run a daemon program that does not properly make itself into a
  true Unix daemon, you can use daemonize to force it to run as a true daemon.


pkgId: b1eb144320272a4aff650841a1b788a9c00877e971360a0868973d023b0c12f3
name: dahdi-tools
arch: src
version: 2.11.1
epoch: 0
release: 31.fc40
summary: Userspace tools to configure the DAHDI kernel modules
url: http://www.asterisk.org/
rpm_license: GPLv2 and LGPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dahdi-tools-2.11.1-31.fc40.src.rpm
checksum_type: sha256
description:
  DAHDI stands for Digium Asterisk Hardware Device Interface. This
  package contains the userspace tools to configure the DAHDI kernel
  modules.  DAHDI is the replacement for Zaptel, which must be renamed
  due to trademark issues.


pkgId: 868a78ed9b3f2d1a4003ab99fb5bf5796c612ef739429a7ac236715d96571fc8
name: dapl
arch: src
version: 2.1.9
epoch: 0
release: 21.fc40
summary: Library providing access to the DAT 2.0 API
url: https://www.openfabrics.org/
rpm_license: GPLv2 or BSD or CPL
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dapl-2.1.9-21.fc40.src.rpm
checksum_type: sha256
description:
  Along with the RDMA kernel drivers, libdat and libdapl provide
  a user-space RDMA API that supports DAT 2.0 specification and IB
  transport extensions for atomic operations and RDMA write with
  immediate data.


pkgId: 4e9061b9f3acd95b64d3b3434d651011badf3edecabf0b8bc7717fd9c4478741
name: daq
arch: src
version: 2.0.7
epoch: 0
release: 5.fc40
summary: Data Acquisition Library
url: https://www.snort.org
rpm_license: GPLv2 and BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/daq-2.0.7-5.fc40.src.rpm
checksum_type: sha256
description:
  Snort 2.9 introduces the DAQ, or Data Acquisition library, for packet I/O.  The
  DAQ replaces direct calls to libpcap functions with an abstraction layer that
  facilitates operation on a variety of hardware and software interfaces without
  requiring changes to Snort.


pkgId: 5d05c560cfea12bc7b6b6d7f9a364402709f7cf096c70fc72cc518bf0b019e97
name: darkgarden-fonts
arch: src
version: 1.1
epoch: 0
release: 36.fc40
summary: Dark Garden is a decorative outline font of unusual shape
url: http://darkgarden.sourceforge.net/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/darkgarden-fonts-1.1-36.fc40.src.rpm
checksum_type: sha256
description:
  Dark Garden is a decorative outline font of unusual shape.
  The typeface is based on author's original hand drawings.
  The letterform is complex, with all characters decorated
  with spikes resembling thorns or flames, character spacing
  is very dense. Such a theme makes it a great font for titles,
  banners, logos etc. Due to the font's complicated form,
  long text passages are not very legible, but short paragraphs
  such as titles or lyrics / poetry look very well.


pkgId: a8dbab2e100f7c8677458879ef454e08660ea485f1c4c2a42eb5cc78d93219a5
name: darkhttpd
arch: src
version: 1.14
epoch: 0
release: 5.fc40
summary: Secure, lightweight, fast, single-threaded HTTP/1.1 server
url: https://github.com/emikulic/darkhttpd
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/darkhttpd-1.14-5.fc40.src.rpm
checksum_type: sha256
description:
  darkhttpd is a secure, lightweight, fast and single-threaded HTTP/1.1 server.

  Features:
  * Simple to set up:
    * Single binary, no other files.
    * Standalone, doesn't need inetd or ucspi-tcp.
    * No messing around with config files.
  * Written in C - efficient and portable.
  * Small memory footprint.
  * Event loop, single threaded - no fork() or pthreads.
  * Generates directory listings.
  * Supports HTTP GET and HEAD requests.
  * Supports Range / partial content.
  * Supports If-Modified-Since.
  * Supports Keep-Alive connections.
  * Can serve 301 redirects based on Host header.
  * Uses sendfile().

  Security:
  * Can log accesses, including Referer and User-Agent.
  * Can chroot.
  * Can drop privileges.
  * Impervious to /../ sniffing.
  * Times out idle connections.
  * Drops overly long requests.

  Limitations:
  * This server only serves static content - *NO* CGI supported!


pkgId: eb14dc17a9f8741d0d4de3c8938767e8cbd02275818db628a54a87e9446d153b
name: dash
arch: src
version: 0.5.12
epoch: 0
release: 3.fc40
summary: Small and fast POSIX-compliant shell
url: http://gondor.apana.org.au/~herbert/dash/
rpm_license: BSD-3-Clause AND GPL-2.0-or-later AND LicenseRef-Fedora-Public-Domain
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dash-0.5.12-3.fc40.src.rpm
checksum_type: sha256
description:
  DASH is a POSIX-compliant implementation of /bin/sh that aims to be as small as
  possible. It does this without sacrificing speed where possible. In fact, it is
  significantly faster than bash (the GNU Bourne-Again SHell) for most tasks.


pkgId: a1c60cc525f5b6ff70f443e98992fe43179cafd74b91b1ee858c9755b4a0c8d3
name: dasher
arch: src
version: 5.0.0
epoch: 0
release: 0.23.beta.fc40
summary: A predictive text input system
url: http://www.inference.phy.cam.ac.uk/dasher/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dasher-5.0.0-0.23.beta.fc40.src.rpm
checksum_type: sha256
description:
  Dasher is an information-efficient text-entry interface, driven by natural
  continuous pointing gestures. Dasher is a competitive text-entry system
  wherever a full-size keyboard cannot be used, e.g. when operating a computer
  one-handed, by joystick, touchscreen, trackball, or mouse, when operating
  a computer without hands (i.e. by head-mouse or by eyetracker), or on
  palmtops or wearable computers.


pkgId: 623a5159357c4721ef3177c7b0db599e849e52f45153b2f71e463d424153ffbe
name: datamash
arch: src
version: 1.8
epoch: 0
release: 4.fc40
summary: A statistical, numerical and textual operations tool
url: https://www.gnu.org/software/datamash/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/datamash-1.8-4.fc40.src.rpm
checksum_type: sha256
description:
  GNU datamash is a command-line program which performs basic
  numeric,textual and statistical operations on input textual data
  files.


pkgId: 2a47f2c1bfe35cc15321eb5c9b6467bc82a5555a603a3873600587bbafa78b38
name: datefudge
arch: src
version: 1.26
epoch: 0
release: 1.fc40
summary: Fake the system date
url: http://packages.qa.debian.org/d/datefudge.html
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/datefudge-1.26-1.fc40.src.rpm
checksum_type: sha256
description:
  This program (and preload library) fakes the system date so that
  programs think the wall clock is ... different. The faking is not
  complete; time-stamp on files are not affected in any way. This
  package is useful if you want to test the date handling of your
  programs without changing the system clock.


pkgId: 1737d3bc8da62106bc4b57e7820507fe0390f76f13341524020ac29f58665009
name: dateutils
arch: src
version: 0.4.10
epoch: 0
release: 5.fc40
summary: Command-line date and time calculation, conversion, and comparison
url: http://www.fresse.org/dateutils/
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dateutils-0.4.10-5.fc40.src.rpm
checksum_type: sha256
description:
  Tools which revolve around fiddling with dates and times on the command
  line, with a strong focus on use cases that arise when dealing with large
  amounts of financial data.


pkgId: 83a72fd0efae7c40626eae581e689c5c15e9aa4ff726cdfee63b4be10b78f560
name: dayplanner
arch: src
version: 0.11
epoch: 0
release: 23.fc40
summary: An easy and clean Day Planner
url: http://www.day-planner.org
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dayplanner-0.11-23.fc40.src.rpm
checksum_type: sha256
description:
  Day Planner is a simple time management program.

  Day Planner is designed to help you easily manage your time.
  It can manage appointments, birthdays and more. It makes sure you
  remember your appointments by popping up a dialog box reminding you about it.


pkgId: 018cacca2508005a41eac2bd83c044fa55256df0041de9b21107c85965a13295
name: dbench
arch: src
version: 4.0
epoch: 0
release: 30.fc40
summary: Filesystem load benchmarking tool
url: http://samba.org/ftp/tridge/dbench/README
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dbench-4.0-30.fc40.src.rpm
checksum_type: sha256
description:
  Dbench is a file system benchmark that generates load patterns similar
  to those of the commercial Netbench benchmark, but without requiring a
  lab of Windows load generators to run. It is now considered a de facto
  standard for generating load on the Linux VFS.


pkgId: f6a9124e5116ffd9d97dafffd534fdd6f8d8aa30dfc35d5dd2939a3fe601f449
name: dbh
arch: src
version: 5.0.16
epoch: 1
release: 21.fc40
summary: Disk based hash library
url: http://dbh.sourceforge.net/
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dbh-5.0.16-21.fc40.src.rpm
checksum_type: sha256
description:
  Disk based hashes is a method to create multidimensional binary trees on disk.
  This library permits the extension of database concept to a plethora of
  electronic data, such as graphic information. With the multidimensional binary
  tree it is possible to mathematically prove that access time to any
  particular record is minimized (using the concept of critical points from
  calculus), which provides the means to construct optimized databases for
  particular applications.


pkgId: a68872928562141a416ec5ea3e3f49c254f749c39a5daf996176b00492587290
name: dbus-broker
arch: src
version: 35
epoch: 0
release: 4.fc40
summary: Linux D-Bus Message Broker
url: https://github.com/bus1/dbus-broker
rpm_license: Apache-2.0 AND LGPL-2.0-or-later and LGPL-2.1-or-later AND (Apache-2.0 OR LGPL-2.1-or-later)
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dbus-broker-35-4.fc40.src.rpm
checksum_type: sha256
description:
  dbus-broker is an implementation of a message bus as defined by the D-Bus
  specification. Its aim is to provide high performance and reliability, while
  keeping compatibility to the D-Bus reference implementation. It is exclusively
  written for Linux systems, and makes use of many modern features provided by
  recent Linux kernel releases.


pkgId: 27921b63483ea4a6661c4f82f81e6ee1487b82b900dd464e075724a5f2780dcc
name: dbus-c++
arch: src
version: 0.9.0
epoch: 0
release: 32.fc40
summary: Native C++ bindings for D-Bus
url: http://sourceforge.net/projects/dbus-cplusplus/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dbus-c++-0.9.0-32.fc40.src.rpm
checksum_type: sha256
description:
  dbus-c++ attempts to provide a C++ API for D-Bus.
  Subpackages are provided with mainloop integration.


pkgId: 6a7e4647a1dfe871f95069d1bf97aec155b7ccf229acf876addd8beaf50bfe8d
name: dbusmenu-qt
arch: src
version: 0.9.3
epoch: 0
release: 0.34.20160218.fc40
summary: A Qt implementation of the DBusMenu protocol
url: https://launchpad.net/libdbusmenu-qt/
rpm_license: LGPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dbusmenu-qt-0.9.3-0.34.20160218.fc40.src.rpm
checksum_type: sha256
description:
  This library provides a Qt implementation of the DBusMenu protocol.

  The DBusMenu protocol makes it possible for applications to export and import
  their menus over DBus.


pkgId: 53d2c87435cebcc8b4ad7d1da742c3c2c24152a8f280451c6c8ba683ba74df77
name: dc3dd
arch: src
version: 7.3.1
epoch: 0
release: 4.fc40
summary: Patched version of GNU dd for use in computer forensics
url: http://sourceforge.net/projects/dc3dd/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dc3dd-7.3.1-4.fc40.src.rpm
checksum_type: sha256
description:
  dc3dd is a patched version of GNU dd to include a number of features useful
  for computer forensics. Many of these features were inspired by dcfldd, but
  were rewritten for dc3dd.

  * Pattern writes. The program can write a single hexadecimal value or a
      text string to the output device for wiping purposes.
  * Piecewise and overall hashing with multiple algorithms and variable
      size windows. Supports MD5, SHA-1, SHA-256, and SHA-512. Hashes can be
      computed before or after conversions are made.
  * Progress meter with automatic input/output file size probing
  * Combined log for hashes and errors
  * Error grouping. Produces one error message for identical sequential
      errors
  * Verify mode. Able to repeat any transformations done to the input
      file and compare it to an output.
  * Ability to split the output into chunks with numerical or alphabetic
      extensions


pkgId: 3737705e230da945c6429fda4e6ccc8942df97e626f41201b9772e1a93f0a172
name: dcfldd
arch: src
version: 1.9.1
epoch: 0
release: 4.fc40
summary: Improved dd, useful for forensics and security
url: https://github.com/resurrecting-open-source-projects/dcfldd
rpm_license: GPLv2+ and BSD and Copyright only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dcfldd-1.9.1-4.fc40.src.rpm
checksum_type: sha256
description:
  dcfldd is an enhanced version of GNU dd with features useful for forensics
  and security. dcfldd has the following additional features:

     * Hashing on-the-fly - dcfldd can hash the input data as it is being
       transferred, helping to ensure data integrity.
     * Status output - dcfldd can update the user of its progress in terms of
       the amount of data transferred and how much longer operation will take.
     * Flexible disk wipes - dcfldd can be used to wipe disks quickly
       and with a known pattern if desired.
     * Image/wipe Verify - dcfldd can verify that a target drive is a
       bit-for-bit match of the specified input file or pattern.
     * Multiple outputs - dcfldd can output to multiple files or disks at
       the same time.
     * Split output - dcfldd can split output to multiple files with more
       configuration possibilities than the split command.
     * Piped output and logs - dcfldd can send all its log data and output
       to commands as well as files.


pkgId: ea0353b790758f152ee37a848e4b3eab67ba358b2d184f7fac4540334657f30e
name: dcraw
arch: src
version: 9.28.0
epoch: 0
release: 23.fc40
summary: Tool for decoding raw image data from digital cameras
url: http://www.dechifro.org/dcraw/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dcraw-9.28.0-23.fc40.src.rpm
checksum_type: sha256
description:
  This package contains dcraw, a command line tool to decode raw image data
  downloaded from digital cameras.


pkgId: 71e13ea5e7c1677a6d56c35f7c850ec7c776be4390ed80e9cc6dd63835253e07
name: dcw-gmt
arch: src
version: 2.1.2
epoch: 0
release: 3.fc40
summary: Digital Chart of the World (DCW) for GMT
url: https://github.com/GenericMappingTools/dcw-gmt
rpm_license: LGPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dcw-gmt-2.1.2-3.fc40.src.rpm
checksum_type: sha256
description:
  DCW-GMT is an enhancement to the original 1:1,000,000 scale vector basemap of
  the world available from the Princeton University Digital Map and Geospatial
  Information Center and from GeoCommunity at
  http://data.geocomm.com/readme/dcw/dcw.html.  To read and process the data you
  should install GMT, the Generic Mapping Tools.


pkgId: 122d6b82b4835b3b706051486316950bfe598ef4ecf9606bb42fe4a079399894
name: dd2
arch: src
version: 0.2.2
epoch: 0
release: 35.fc40
summary: Dodgin' Diamond 2 - Shoot'em up arcade game
url: http://www.usebox.net/jjm/dd2/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dd2-0.2.2-35.fc40.src.rpm
checksum_type: sha256
description:
  This is a little shoot'em up arcade game for one or two players. It aims to
  be an 'old school' arcade game with low resolution graphics, top-down scroll
  action, energy based gameplay and different weapons with several levels of
  power.


pkgId: dd1c079324bc167355c23c3651cf679c1c46cba61ad3fe681c3b0bacd79fc49c
name: dd_rescue
arch: src
version: 1.99.13
epoch: 0
release: 5.fc40
summary: Fault tolerant "dd" utility for rescuing data from bad media
url: http://www.garloff.de/kurt/linux/ddrescue/
rpm_license: GPL-2.0-only OR GPL-3.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dd_rescue-1.99.13-5.fc40.src.rpm
checksum_type: sha256
description:
  The dd_rescue is a utility similar to the system utility "dd" which copies
  data from a file or block device to another. The dd_rescue does however
  not abort on errors in the input file. This makes it suitable for
  rescuing data from media with errors, e.g. a disk with bad sectors.

  This package includes dd_rhelp wrapper script facilitating data
  recovery. It is trying to make it so simple to recover as:
  dd_rhelp source target

  Please note Fedora ships also GNU ddrescue, which probably gives
  faster and more reliable results rescuing whole disks.
  But still there might be some niche pattern of bad sectors,
  which might get better covered by dd_rescue and both tools
  might be used with sub-sequent runs cooperatively on the same disk image.


pkgId: de37512f9a806477e1fc71643783452822a28531a4aa5a0c7bb64da936838810
name: ddcutil
arch: src
version: 2.1.2
epoch: 0
release: 1.fc40
summary: Query and update monitor settings
url: http://www.ddcutil.com
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ddcutil-2.1.2-1.fc40.src.rpm
checksum_type: sha256
description:
  Query and change monitor settings

  ddcutil communicates with monitors implementing MCCS (Monitor Control Command
  Set), using either the DDC/CI protocol on the I2C bus or as a Human Interface
  Device on USB.  In general, anything that can be controlled using a monitor's
  on-screen display can be controlled by this program.  Examples include
  changing a monitor's input source and adjusting its brightness.


pkgId: b90a131164beb6da47843255d3f9de2f77ed77a4b67104d3333d4d2970492367
name: ddd
arch: src
version: 3.4.0
epoch: 0
release: 4.fc40
summary: GUI for several command-line debuggers
url: http://www.gnu.org/software/ddd/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ddd-3.4.0-4.fc40.src.rpm
checksum_type: sha256
description:
  The Data Display Debugger (DDD) is a popular GUI for command-line
  debuggers like GDB, DBX, JDB, WDB, XDB, the Perl debugger, and the
  Python debugger. DDD allows you to view source texts and provides an
  interactive graphical data display, in which data structures are
  displayed as graphs. You can use your mouse to dereference pointers
  or view structure contents, which are updated every time the program
  stops. DDD can debug programs written in Ada, C, C++, Chill, Fortran,
  Java, Modula, Pascal, Perl, and Python. DDD provides machine-level
  debugging; hypertext source navigation and lookup; breakpoint,
  watchpoint, backtrace, and history editors; array plots; undo and
  redo; preferences and settings editors; program execution in the
  terminal emulation window, debugging on a remote host, an on-line
  manual, extensive help on the Motif user interface, and a command-line
  interface with full editing, history and completion capabilities.


pkgId: 717cd748a297fb248f0d8f46be3909d9f7175ce2bd82e1b4bc835ab39a0a2573
name: ddgr
arch: src
version: 2.1
epoch: 0
release: 6.fc40
summary: DuckDuckGo from the terminal
url: https://github.com/jarun/ddgr
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ddgr-2.1-6.fc40.src.rpm
checksum_type: sha256
description:
  ddgr is a cmdline utility to search DuckDuckGo from the terminal.
  While googler is highly popular among cmdline users, in many forums the need
  of a similar utility for privacy-aware DuckDuckGo came up. DuckDuckGo Bangs
  are super-cool too! So here's ddgr for you!

  Unlike the web interface, you can specify the number of search results you
  would like to see per page. It's more convenient than skimming through
  30-odd search results per page. The default interface is carefully
  designed to use minimum space without sacrificing readability.

  ddgr isn't affiliated to DuckDuckGo in any way.


pkgId: ccb6fbcbc2fa529d26d66375ef6fe545532d3f7736c9cb8de502a4d7fe980733
name: ddiskit
arch: src
version: 3.6
epoch: 0
release: 24.20191129gitde1f684.20191129gitde1f684.fc40
summary: Tool for Red Hat Enterprise Linux Driver Update Disk creation
url: https://github.com/orosp/ddiskit
rpm_license: GPL-3.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ddiskit-3.6-24.20191129gitde1f684.20191129gitde1f684.fc40.src.rpm
checksum_type: sha256
description:
  Ddiskit is a little framework for simplifying creation of proper
  Driver Update Disks (DUD) used for providing new or updated out-of-tree
  kernel modules.


pkgId: 3343d157783c865b60ba6cee1977c8f2a17d1d0dbf77890ed9eb02bebbc0e301
name: ddpt
arch: src
version: 0.97
epoch: 0
release: 9.fc40
summary: Variant of the dd utility for SCSI/storage devices
url: http://sg.danny.cz/sg/ddpt.html
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ddpt-0.97-9.fc40.src.rpm
checksum_type: sha256
description:
  The ddpt utility is a variant of the standard Unix command dd which copies
  files. The ddpt utility specializes in files that are block devices. For block
  devices that understand the SCSI command set, finer grain control over the
  copy may be available via a SCSI pass-through interface. Note that recent
  (S)ATA disks can often be driven by SCSI commands due to SCSI to ATA
  translation (SAT) implemented in the kernel.


pkgId: dcd3b0cabfe7fd4c0e069f82484f7a4930b2e4a1559208a3f10f1835269f3626
name: ddrescue
arch: src
version: 1.28
epoch: 0
release: 1.fc40
summary: Data recovery tool trying hard to rescue data in case of read errors
url: http://www.gnu.org/software/ddrescue/ddrescue.html
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ddrescue-1.28-1.fc40.src.rpm
checksum_type: sha256
description:
  GNU ddrescue is a data recovery tool. It copies data from one file or block
  device (hard disc, cd-rom, etc) to another, trying hard to rescue data in
  case of read errors. GNU ddrescue does not truncate the output file if not
  asked to. So, every time you run it on the same output file, it tries to
  fill in the gaps.


pkgId: a94c1c860f9ac027ad0e34729dff952dd5724c385652889559f176059f1a181d
name: ddupdate
arch: src
version: 0.7.1
epoch: 0
release: 10.fc40
summary: Tool updating DNS data for dynamic IP addresses
url: http://github.com/leamas/ddupdate
rpm_license: MIT
rpm_group: Applications/System
rpm_buildhost: localhost
location_href: Packages/ddupdate-0.7.1-10.fc40.src.rpm
checksum_type: sha256
description:
  A tool to update dynamic IP addresses typically obtained using DHCP
  with dynamic DNS services such as changeip.com, duckdns.org or no-ip.com.
  It makes it  possible to access a machine with a fixed name like
  myhost.duckdns.org even if the ip address changes. ddupdate caches the
  address, and only attempts the update if the address actually is changed.

  The tool has a plugin structure with plugins for obtaining the actual
  address (typically hardware-dependent) and to update it (service depen‐
  dent). For supported services, it's a linux-centric, user-friendly and
  flexible alternative to the ubiquitous ddclient.

  ddupdate is distributed with systemd support to run at regular intervals,
  and with NetworkManager templates to run when interfaces goes up or down.


pkgId: 6b84fd7a75495643cbb1e765afc173e853167e9caf4ef3060a0b7381bc2d56a9
name: deal
arch: src
version: 3.1.11
epoch: 0
release: 13.fc40
summary: Bridge Hand Generator
url: https://github.com/gtwilliams/deal
rpm_license: GPL-2.0-or-later AND GPL-1.0-or-later AND BSD-3-Clause-Attribution
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/deal-3.1.11-13.fc40.src.rpm
checksum_type: sha256
description:
  This program generates bridge hands.  It can be told to generate only
  hands satisfying conditions like being balanced, having a range of
  HCPs, controls, or other user-definable properties.  Hands can be
  output in various formats, like pbn for feeding to other bridge
  programs, deal itself, or split up into a file per player for
  practise.  Extensible via Tcl.


pkgId: 064b392f676ec998ed9c3196281006840066cf8d2e8e496bd74c4c709e137af4
name: debbuild
arch: src
version: 20.04.0
epoch: 0
release: 13.fc40
summary: Build Debian-compatible .deb packages from RPM .spec files
url: https://github.com/debbuild/debbuild
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/debbuild-20.04.0-13.fc40.src.rpm
checksum_type: sha256
description:
  debbuild attempts to build Debian-friendly semi-native packages from
  RPM spec files, RPM-friendly tarballs, and RPM source packages
  (.src.rpm files).  It accepts most of the options rpmbuild does, and
  should be able to interpret most spec files usefully.


pkgId: c37663a303b200a6f34683ed063c76276fba8dc58b3b8cc5a9d9537e2e077732
name: debconf
arch: src
version: 1.5.82
epoch: 0
release: 5.fc40
summary: Debian configuration management system
url: https://tracker.debian.org/pkg/debconf
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/debconf-1.5.82-5.fc40.src.rpm
checksum_type: sha256
description:
  Debconf is a configuration management system for Debian
  packages. Packages use Debconf to ask questions when
  they are installed.


pkgId: 151277e71cbfbe8df51bfdb2847899014b227ffe80865665be5c61e22fb724fe
name: debhelper
arch: src
version: 13.11.6
epoch: 0
release: 3.fc40
summary: Helper programs for debian/rules
url: https://tracker.debian.org/pkg/debhelper
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/debhelper-13.11.6-3.fc40.src.rpm
checksum_type: sha256
description:
  A collection of programs that can be used in a debian/rules file to
  automate common tasks related to building Debian packages. Programs
  are included to install various files into your package, compress
  files, fix file permissions, integrate your package with the Debian
  menu system, debconf, doc-base, etc. Most Debian packages use debhelper
  as part of their build process.


pkgId: a076b12051fccda514885d284f98fb8a0e13aa8c63c5609b8bfc13e1148dddf8
name: debian-keyring
arch: src
version: 2023.4
epoch: 0
release: 3.fc40
summary: GnuPG archive keys of the Debian archive
url: http://packages.debian.org/unstable/admin/debian-archive-keyring
rpm_license: LicenseRef-Fedora-Public-Domain
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/debian-keyring-2023.4-3.fc40.src.rpm
checksum_type: sha256
description:
  The Debian project digitally signs its Release files. This package contains the
  archive keys used for that.


pkgId: d6668733933bf995b18c4d26704f867ddf19e626990c02667a0526ac9b7cf27d
name: debmirror
arch: src
version: 2.42
epoch: 0
release: 1
summary: Debian partial mirror script, with ftp and package pool support
url: https://tracker.debian.org/pkg/debmirror
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/debmirror-2.42-1.src.rpm
checksum_type: sha256
description:
  This program downloads and maintains a partial local Debian mirror.
  It can mirror any combination of architectures, distributions and
  sections. Files are transferred by ftp, http, hftp or rsync, and package
  pools are fully supported. It also does locking and updates trace files.


pkgId: 6f7b3dd470ee8aae05bcf5aab81b3c8b3c9c2a3d47e573b062499caad72314a1
name: debootstrap
arch: src
version: 1.0.132
epoch: 0
release: 3.fc40
summary: Debian GNU/Linux bootstrapper
url: https://wiki.debian.org/Debootstrap
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/debootstrap-1.0.132-3.fc40.src.rpm
checksum_type: sha256
description:
  debootstrap is used to create a Debian base system from scratch, without
  requiring the availability of dpkg or apt.  It does this by downloading
  .deb files from a mirror site, and carefully unpacking them into a
  directory which can eventually be chrooted into.

  This might be often useful coupled with virtualization techniques to run
  Debian GNU/Linux guest system.


pkgId: 324093a250087769b5f37294ea32b53c13cc437d1d44ed51ff1a8af9f5c8437a
name: debugbreak
arch: src
version: 1.0
epoch: 0
release: 16.fc40
summary: Break into the debugger programmatically
url: https://github.com/scottt/debugbreak
rpm_license: BSD-2-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/debugbreak-1.0-16.fc40.src.rpm
checksum_type: sha256
description:
  debugbreak.h allows you to put breakpoints in your C/C++ code with a call to
  debug_break().

    • Include one header file and insert calls to debug_break() in the code where
      you wish to break into the debugger.
    • Supports GCC, Clang and MSVC.
    • Works well on ARM, AArch64, i686, x86-64, POWER and has a fallback code
      path for other architectures.
    • Works like the DebugBreak() function provided by Windows and QNX.


pkgId: 8adb97266197cda12dab807af071c7e2000eeda977e4c9e3e66a681756144e1b
name: deco
arch: src
version: 1.6.4
epoch: 0
release: 18.fc40
summary: Extractor for various archive file formats
url: https://github.com/peha/deco/
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/deco-1.6.4-18.fc40.src.rpm
checksum_type: sha256
description:
  deco is a Un*x program, written in SUSv3-compliant C99,
  that is able to extract various archive file formats
  with features like consistent behavior, consistent
  interface and much more.


pkgId: c89b79c5607eb4cbbdcb33873009e2d28eb991981be859b349694b52f1b96f1b
name: dee
arch: src
version: 1.2.7
epoch: 0
release: 52.fc40
summary: Model to synchronize multiple instances over DBus
url: https://launchpad.net/dee
rpm_license: LGPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dee-1.2.7-52.fc40.src.rpm
checksum_type: sha256
description:
  Libdee is a library that uses DBus to provide objects allowing you to
  create Model-View-Controller type programs across DBus. It also
  consists of utility objects which extend DBus allowing for peer-to-peer
  discoverability of known objects without needing a central registrar.


pkgId: f3037875dd9e9ffae2f91c0da88bca21ac7bb179742bbc7f015a00ab1e2fd798
name: deepin-gettext-tools
arch: src
version: 1.0.8
epoch: 0
release: 14.fc40
summary: Deepin Gettext Tools
url: https://github.com/linuxdeepin/deepin-gettext-tools
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/deepin-gettext-tools-1.0.8-14.fc40.src.rpm
checksum_type: sha256
description:
  The tools of gettext function wrapper.

  desktop-ts-convert - handling desktop file translations.
  policy-ts-convert - convert PolicyKit Policy file to the ts file.
  update-pot - scan msgid and generate pot file according to the ini file.
  generate-mo - scan po files and generate mo files according to the ini file.


pkgId: d132ed129eb2feaf604678939cf6a203dcc190e82461698ca02aafd433908a56
name: dejagnu
arch: src
version: 1.6.3
epoch: 1
release: 10.fc40
summary: A front end for testing other programs
url: http://www.gnu.org/software/dejagnu/
rpm_license: GPL-3.0-or-later AND GFDL-1.3-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dejagnu-1.6.3-10.fc40.src.rpm
checksum_type: sha256
description:
  DejaGnu is an Expect/Tcl based framework for testing other programs.
  DejaGnu has several purposes: to make it easy to write tests for any
  program; to allow you to write tests which will be portable to any
  host or target where a program must be tested; and to standardize the
  output format of all tests (making it easier to integrate the testing
  into software development).


pkgId: 67cf3ec7a9196cdeb0b4b11b4dacdc9f35df9e6a3584c6de59cd15ce0c4e05a6
name: deletemail
arch: src
version: 0.5
epoch: 0
release: 35.fc40
summary: A non-interactive tool for deleting mails
url: http://www.jhweiss.de/software/deletemail.html
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/deletemail-0.5-35.fc40.src.rpm
checksum_type: sha256
description:
  deletemail is a non-interactive tool for removing mail which is older
  than a configurable number of days from one or more IMAP mailboxes. By
  default, mail which is not marked as seen on the server will not be
  deleted. If, for example, fetchmail is used for receiving mail from an
  IMAP server, deletemail might be useful, since fetchmail deletes mail
  either immediately or not at all. Thus, you could use fetchmails keep
  option (so that fetchmail never deletes anything) and let deletemail
  handle the removal of mail. Currently, the IMAP4 and IMAP4rev1 protocols
  are supported, optionally using SSL/TLS for secure IMAP connections.


pkgId: 3ac47953e721efadb3b0de79a173b1aa126dda967a5c12d89cfba3880fd56713
name: deltarpm
arch: src
version: 3.6.3
epoch: 0
release: 13.fc40
summary: Create deltas between rpms
url: https://github.com/rpm-software-management/deltarpm
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/deltarpm-3.6.3-13.fc40.src.rpm
checksum_type: sha256
description:
  A deltarpm contains the difference between an old
  and a new version of a rpm, which makes it possible
  to recreate the new rpm from the deltarpm and the old
  one. You don't have to have a copy of the old rpm,
  deltarpms can also work with installed rpms.


pkgId: 5f8e26fe95ac916f0651c4cdc45e83c10fda0bad025f3946a05dd8407ba37121
name: demorse
arch: src
version: 1.2
epoch: 0
release: 22.fc40
summary: Command line tool for decoding Morse code signals
url: http://www.qsl.net/5b4az/pages/morse.html
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/demorse-1.2-22.fc40.src.rpm
checksum_type: sha256
description:
  demorse is a non-interactive command line tool for decoding Morse code signals
  into text. demorse detects the "dihs" and "dahs" that make a Morse code
  character via the computer's sound card, which can be connected to a radio
  receiver tuned to a CW Morse code transmission or to a tone generator.

  The input signal is processed by a Goertzel tone detector which produces "mark"
  or "space" (signal/no signal) outputs and the resulting stream of Morse code
  "elements" is decoded into an ASCII character for printing to the screen.
  Currently demorse is a non- interactive command line tool for the console and
  decoded Morse signals are sent to stdout.


pkgId: 820fd214af36619a6fee2086eeaf8be3f619018c43f85aaf2729ac7719692a66
name: desktop-file-utils
arch: src
version: 0.26
epoch: 0
release: 12.fc40
summary: Utilities for manipulating .desktop files
url: https://www.freedesktop.org/software/desktop-file-utils
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/desktop-file-utils-0.26-12.fc40.src.rpm
checksum_type: sha256
description:
  .desktop files are used to describe an application for inclusion in
  GNOME or KDE menus.  This package contains desktop-file-validate which
  checks whether a .desktop file complies with the specification at
  http://www.freedesktop.org/standards/, and desktop-file-install
  which installs a desktop file to the standard directory, optionally
  fixing it up in the process.


pkgId: 8960b2b79fadca98497e4c8506ef1791eecc393e030fc0168296e3b804693985
name: desktopfolder
arch: src
version: 1.1.3
epoch: 0
release: 5.fc40
summary: Bring your desktop back to life
url: https://github.com/spheras/desktopfolder
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/desktopfolder-1.1.3-5.fc40.src.rpm
checksum_type: sha256
description:
  Organize your desktop with panels that hold your things.

  - Access files, folders and apps from your desktop
  - Drop files, folders, links and .desktop launchers inside panels
  - Resize, position and color panels
  - Display photos and keep notes on your desktop
  - Reveal the desktop with ⌘-D

  Open it like any other app after installing. Desktop Folder will launch
  automatically when you next log in.


pkgId: 1cd962c5c5217dcecc884e7c2c122444569ad70e0d296430b0f09ef7ae283fa2
name: detox
arch: src
version: 1.4.5
epoch: 0
release: 7.fc40
summary: Utility to replace problematic characters in file names
url: https://github.com/dharple/detox
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/detox-1.4.5-7.fc40.src.rpm
checksum_type: sha256
description:
  Detox is a utility designed to clean up file names. It replaces difficult to
  work with characters, such as spaces, with standard equivalents. It will also
  clean up file names with UTF-8 or Latin-1 (or CP-1252) characters in them.


pkgId: e3cb3977a216d39f2683d6f6d6c865331250f48556c4daee41621cc7c0c6916d
name: deutex
arch: src
version: 5.2.2
epoch: 0
release: 11.fc40
summary: DOOM wad file manipulator
url: https://github.com/Doom-Utils/deutex
rpm_license: GPL-2.0-or-later and MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/deutex-5.2.2-11.fc40.src.rpm
checksum_type: sha256
description:
  DeuTex is a wad composer for Doom, Heretic, Hexen and Strife. It can be
  used to extract the lumps of a wad and save them as individual files.
  Conversely, it can also build a wad from separate files. When extracting
  a lump to a file, it does not just copy the raw data, it converts it to
  an appropriate format (such as PPM for graphics, Sun audio for samples,
  etc.). Conversely, when it reads files for inclusion in pwads, it does
  the necessary conversions (for example, from PPM to Doom picture
  format). In addition, DeuTex has functions such as merging wads, etc. If
  you're doing any wad hacking beyond level editing, DeuTex is a must.


pkgId: 43d7ca665f294ff63ad792dc5919c13fc06eb03053f9e7c899b67eec92e35981
name: dev86
arch: src
version: 0.16.21
epoch: 0
release: 26.fc40
summary: A real mode 80x86 assembler and linker
url: http://v3.sk/~lkundrak/dev86/
rpm_license: GPL+ and GPLv2+ and LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dev86-0.16.21-26.fc40.src.rpm
checksum_type: sha256
description:
  The dev86 package provides an assembler and linker for real mode 80x86
  instructions. You'll need to have this package installed in order to
  build programs that run in real mode, including LILO and the kernel's
  bootstrapping code, from their sources.

  You should install dev86 if you intend to build programs that run in real
  mode from their source code.


pkgId: 92b4b73d65614879ddb1e7e92e43fb697cedfcf6ff33b1000ee6d34eb4b3d0fb
name: devhelp
arch: src
version: 43.0
epoch: 1
release: 5.fc40
summary: API documentation browser
url: https://wiki.gnome.org/Apps/Devhelp
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/devhelp-43.0-5.fc40.src.rpm
checksum_type: sha256
description:
  Devhelp is an API documentation browser for the GNOME desktop.
  It works natively with API documentation generated by gtk-doc.


pkgId: 1721f6473d425967c55c105956208b3bf2228d5149c35f4642396883c1ca7971
name: device-mapper-multipath
arch: src
version: 0.9.7
epoch: 0
release: 7.fc40
summary: Tools to manage multipath devices using device-mapper
url: http://christophe.varoqui.free.fr/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/device-mapper-multipath-0.9.7-7.fc40.src.rpm
checksum_type: sha256
description:
  device-mapper-multipath provides tools to manage multipath devices by
  instructing the device-mapper multipath kernel module what to do.
  The tools are :
  * multipath - Scan the system for multipath devices and assemble them.
  * multipathd - Detects when paths fail and execs multipath to update things.


pkgId: cf0b02a0eb431e089565d8278707ee9a68211ebac36042f7062384319ccb5c7b
name: devio
arch: src
version: 1.2
epoch: 0
release: 30.fc40
summary: Read and write utility for block devices
url: http://devio.sourceforge.net
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/devio-1.2-30.fc40.src.rpm
checksum_type: sha256
description:
  devio is a command line utility intended to read and write on block devices.
  The primary difference between devio and other command line utilities, such
  as dd and cat, is that it is not stream based - it writes directly into
  the object rather than reading and writing a stream of data.


pkgId: 6781e6aa49349fbc0d208a31eec1c2733696b48ecaaa2165056700601b8ab045
name: devtodo
arch: src
version: 0.1.20
epoch: 0
release: 36.fc40
summary: Manage a prioritised list of todo items organized by directory
url: http://swapoff.org/DevTodo
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/devtodo-0.1.20-36.fc40.src.rpm
checksum_type: sha256
description:
  Todo is a program to display and manage a hierarchical, prioritised list of
  outstanding work, or just reminders.

  The program itself is assisted by a few shell scripts that override default
  builtins. Specifically, cd, pushd and popd are overridden so that when using
  one of these commands to enter a directory, the todo will display any
  outstanding items in that directory.

  For much more complete information please refer to the man page (devtodo(1)).


pkgId: 2c367132faad6f218bf3e743a28b834a47524993b0d7f87986d46a5c3af7bc88
name: dex-autostart
arch: src
version: 0.10.1
epoch: 0
release: 1.fc40
summary: Generate and execute DesktopEntry files
url: https://github.com/jceb/dex
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dex-autostart-0.10.1-1.fc40.src.rpm
checksum_type: sha256
description:
  dex-autostart, DesktopEntry Execution, is a program to generate and execute
  DesktopEntry files of the Application type.


pkgId: 789764e192758de442046ac74fb082a75c2cca8afaa7db011f3a6a30a99e37a2
name: dfu-util
arch: src
version: 0.11
epoch: 0
release: 7.fc40
summary: USB Device Firmware Upgrade tool
url: http://dfu-util.sourceforge.net/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dfu-util-0.11-7.fc40.src.rpm
checksum_type: sha256
description:
  USB Device Firmware Upgrade (DFU) is an official USB device class specification
  of the USB Implementers Forum. It specifies a vendor and device independent way
  of updating the firmware of a USB device. The idea is to have only one
  vendor-independent firmware update tool as part of the operating system, which
  can then (given a particular firmware image) be downloaded into the device.

  In addition to firmware download, it also specifies firmware upload, i.e.
  loading the currently installed device firmware to the USB Host.

  The DFU specification can be found at:
   http://www.usb.org/developers/devclass_docs/usbdfu10.pdf


pkgId: 06aabe63b57bab7d81bdc7673a6e5d9d91d272b58e36c1ee0b0cdfe288dc8fe6
name: dfuzzer
arch: src
version: 2.3
epoch: 0
release: 1.fc40
summary: D-Bus fuzz testing tool
url: https://github.com/dbus-fuzzer/dfuzzer
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dfuzzer-2.3-1.fc40.src.rpm
checksum_type: sha256
description:
  Tool for fuzz testing processes communicating through D-Bus. It can be
  used to test processes connected to both, the session bus and the system
  bus daemon. Dfuzzer works as a client, it first connects to the bus
  daemon and then it traverses and fuzz tests all the methods provided
  by a D-Bus service.


pkgId: d5f73de9f002e581b25baf06087c8279f29e9f53d9b36e064726f8f1d081dacb
name: dh-autoreconf
arch: src
version: 20
epoch: 0
release: 10.fc40
summary: debhelper add-on to call autoreconf and clean up after the build
url: https://tracker.debian.org/pkg/dh-autoreconf
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dh-autoreconf-20-10.fc40.src.rpm
checksum_type: sha256
description:
  dh-autoreconf provides a debhelper sequence addon named 'autoreconf' and two
  commands, dh_autoreconf and dh_autoreconf_clean.
   * The dh_autoreconf command creates a list of the files and their checksums,
     calls autoreconf and then creates a second list for the new files.
   * The dh_autoreconf_clean command compares these two lists and removes all
     files which have been added or changed (files may be excluded if needed).
  For CDBS users, a rule is provided to call the dh-autoreconf programs at the
  right time.


pkgId: 5bd3a738b02db9a74416b9df8eb6e030e6baffe5fbe7a5069dcc55633a5b4bcb
name: dh-make
arch: src
version: 2.202304
epoch: 0
release: 1.fc40
summary: Tool that converts source archives into Debian package source
url: https://tracker.debian.org/pkg/dh-make
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dh-make-2.202304-1.fc40.src.rpm
checksum_type: sha256
description:
  This package allows you to take a standard (or upstream) source
  package and convert it into a format that will allow you to build
  Debian packages.


pkgId: a0aacbe25d2ae8b89ea9639ab3622099f39114da4d131cef00200ba0f3004104
name: dhcp-forwarder
arch: src
version: 0.11
epoch: 0
release: 20.fc40
summary: DHCP relay agent
url: http://www.nongnu.org/dhcp-fwd/
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dhcp-forwarder-0.11-20.fc40.src.rpm
checksum_type: sha256
description:
  dhcp-fwd forwards DHCP messages between subnets with different sublayer
  broadcast domains. It is similar to the DHCP relay agent dhcrelay of
  ISC's DHCP, but has the following important features:

  * Runs as non-root in a chroot-environment
  * Uses AF_INET sockets which makes it possible to filter incoming
    messages with packetfilters
  * The DHCP agent IDs can be defined freely
  * Has a small memory footprint when using dietlibc


pkgId: 01019eb0f727ae1f0ba9e132d1d4dc9ec8b41dc6f8af03e5e0abdcee83c2575e
name: dhcpd-pools
arch: src
version: 3.2
epoch: 0
release: 6.fc40
summary: ISC dhcpd lease analysis and reporting
url: http://dhcpd-pools.sourceforge.net/
rpm_license: BSD and ASL 2.0 and GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dhcpd-pools-3.2-6.fc40.src.rpm
checksum_type: sha256
description:
  This is for ISC DHCP shared network and pool range usage analysis.  Purpose
  of command is to count usage ratio of each IP range and shared network pool
  which ISC dhcpd is in control of. Users of the command are most likely ISPs
  and other organizations that have large IP space.


pkgId: 057cfa7246477a740fe194cd0645cfe405f59ecfed5ee81c8e284b732bcfd2d5
name: dhex
arch: src
version: 0.69
epoch: 0
release: 12.fc40
summary: Ncurses based hexadecimal editor with a diff mode
url: http://www.dettus.net/dhex/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dhex-0.69-12.fc40.src.rpm
checksum_type: sha256
description:
  DHEX is a more than just another hex editor: It includes a diff mode, which
  can be used to easily and conveniently compare two binary files. Since it is
  based on ncurses and is themeable, it can run on any number of systems and
  scenarios. With its utilization of search logs, it is possible to track
  changes in different iterations of files easily.


pkgId: af3983e3ce8727115f8b06d10911d4665021f09f91aa364a2e18f6dfec0e5ce0
name: dhtest
arch: src
version: 1.5
epoch: 0
release: 13.fc40
summary: A DHCP client simulation on linux
url: https://github.com/saravana815/dhtest
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dhtest-1.5-13.fc40.src.rpm
checksum_type: sha256
description:
  It can simulate multiple DHCP clients behind a network device.
  It can help in testing the DHCP servers or in testing switch/router
  by loading the device with multiple DHCP clients.


pkgId: a43a84c9c569f600e7aec498575ff01d91edda4c7088373cc7e0889527b71cb2
name: dia
arch: src
version: 0.97.3
epoch: 1
release: 27.fc40
summary: Diagram drawing program
url: https://wiki.gnome.org/Apps/Dia
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dia-0.97.3-27.fc40.src.rpm
checksum_type: sha256
description:
  The Dia drawing program can be used to draw different types of diagrams,
  and includes support for UML static structure diagrams (class diagrams),
  entity relationship modeling, and network diagrams.  Dia can load and
  save diagrams to a custom XML format and export diagrams to formats like
  EPS, SVG, XFIG, PDF, PNG and others.


pkgId: f708ad7d67f78b2e9b693872e6b1950ad5cebb469554fa8202f350fa44f1d5e1
name: dib-utils
arch: src
version: 0.0.11
epoch: 0
release: 17.fc40
summary: Pieces of diskimage-builder that are useful standalone
url: https://git.openstack.org/cgit/openstack/dib-utils
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dib-utils-0.0.11-17.fc40.src.rpm
checksum_type: sha256
description:
  Pieces of diskimage-builder that are useful standalone.
  This allows them to be used without pulling in all of
  diskimage-builder and its dependencies.


pkgId: 0471aa8f3074d2b94cff6c5f52090377315e6a0cb81496141ebf80b11739710b
name: dictd
arch: src
version: 1.12.1
epoch: 0
release: 36.fc40
summary: DICT protocol (RFC 2229) server and command-line client
url: http://www.dict.org/
rpm_license: GPL+ and zlib and MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dictd-1.12.1-36.fc40.src.rpm
checksum_type: sha256
description:
  Command-line client for the DICT protocol.  The Dictionary Server
  Protocol (DICT) is a TCP transaction based query/response protocol that
  allows a client to access dictionary definitions from a set of natural
  language dictionary databases.


pkgId: 2a6025fe529849261038b70ea666f6ae2751fba8f92d6df8f78807031766384e
name: diction
arch: src
version: 1.14
epoch: 0
release: 8.fc40
summary: Identifies diction and style errors
url: http://www.gnu.org/software/diction/diction.html
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/diction-1.14-8.fc40.src.rpm
checksum_type: sha256
description:
  Diction and style are two old standard UNIX commands. Diction identifies wordy
  and commonly misused phrases. Style analyses surface characteristics of a
  document, including sentence length and other readability measures.

  These programs cannot help you structure a document well, but they can help to
  avoid poor wording and compare the readability (not the understandability!) of
  your documents with others. Both commands support English and German documents.


pkgId: 918c14d48a954096cc5d9ace442534aff2bc191562271ef30f98388a5d52cf71
name: dietlibc
arch: src
version: 0.34
epoch: 0
release: 17.fc40
summary: Small libc implementation
url: http://www.fefe.de/dietlibc/
rpm_license: GPL-2.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dietlibc-0.34-17.fc40.src.rpm
checksum_type: sha256
description:
  The diet libc is a libc that is optimized for small size. It can be
  used to create small statically linked binaries for Linux on alpha,
  arm, hppa, ia64, i386, mips, s390, sparc, sparc64, ppc and x86_64.


pkgId: 5a9a41da152ce8fc2dc998b1b230d0f44a0a02462b057f6e68f988856121a8be
name: diff-so-fancy
arch: src
version: 1.4.4
epoch: 0
release: 4.fc40
summary: Good-lookin' diffs
url: https://github.com/so-fancy/diff-so-fancy
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/diff-so-fancy-1.4.4-4.fc40.src.rpm
checksum_type: sha256
description:
  diff-so-fancy strives to make your diffs human readable instead of machine
  readable. This helps improve code quality and helps you spot defects faster.


pkgId: 1ce3d8832652ca8d51a07bc82065d72a7c0500b28853fb7c0e6737b8f1f7a8bd
name: diffmark
arch: src
version: 0.10
epoch: 0
release: 32.fc40
summary: XML diff and merge
url: http://www.mangrove.cz/diffmark/
rpm_license: diffmark and (GPL+ or Artistic)
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/diffmark-0.10-32.fc40.src.rpm
checksum_type: sha256
description:
  This is an XML diff and merge package. It consists of a shared library and
  two utilities: dm and dm-merge.


pkgId: 3fec74ece780fe9c21a3df5bc340b6e69ccbe7a33a0d5bd0c6c2b4b598bc8ff5
name: diffpdf
arch: src
version: 2.1.3
epoch: 0
release: 30.fc40
summary: PDF files comparator
url: http://www.qtrac.eu/diffpdf.html
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/diffpdf-2.1.3-30.fc40.src.rpm
checksum_type: sha256
description:
  DiffPDF is used to compare two PDF files. By default the comparison is
  of the text on each pair of pages, but comparing the appearance of pages
  is also supported (for example, if a diagram is changed or a paragraph
  reformatted). It is also possible to compare particular pages or page
  ranges.


pkgId: 5c6e37ce84771bab466fceedf4c06399ebe10eb9817ab42408d47e702bff8175
name: diffstat
arch: src
version: 1.66
epoch: 0
release: 1.fc40
summary: A utility which provides statistics based on the output of diff
url: https://invisible-island.net/diffstat
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/diffstat-1.66-1.fc40.src.rpm
checksum_type: sha256
description:
  The diff command compares files line by line.  Diffstat reads the
  output of the diff command and displays a histogram of the insertions,
  deletions and modifications in each file.  Diffstat is commonly used
  to provide a summary of the changes in large, complex patch files.

  Install diffstat if you need a program which provides a summary of the
  diff command's output.


pkgId: d1f6ac288ca794a8bcff94b90152276da21e08c4a987f0a4cd5dfa716d70b698
name: diffuse
arch: src
version: 0.9.0
epoch: 0
release: 3.fc40
summary: Graphical tool for merging and comparing text files
url: https://mightycreak.github.io/diffuse/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/diffuse-0.9.0-3.fc40.src.rpm
checksum_type: sha256
description:
  Diffuse is a graphical tool for merging and comparing text files. Diffuse is
  able to compare an arbitrary number of files side-by-side and gives users the
  ability to manually adjust line-matching and directly edit files. Diffuse can
  also retrieve revisions of files from Bazaar, CVS, Darcs, Git, Mercurial,
  Monotone, RCS, Subversion, and SVK repositories for comparison and merging.
  This is the Python 3 fork of Diffuse.


pkgId: 79aec75a468d867495ce79d370cfd3c7d6f56806869ecd914eeaf6d064567d1a
name: diffutils
arch: src
version: 3.10
epoch: 0
release: 5.fc40
summary: GNU collection of diff utilities
url: https://www.gnu.org/software/diffutils/diffutils.html
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/diffutils-3.10-5.fc40.src.rpm
checksum_type: sha256
description:
  Diffutils includes four utilities: diff, cmp, diff3 and sdiff. Diff
  compares two files and shows the differences, line by line.  The cmp
  command shows the offset and line numbers where two files differ, or
  cmp can show the characters that differ between the two files.  The
  diff3 command shows the differences between three files.  Diff3 can be
  used when two people have made independent changes to a common
  original; diff3 can produce a merged file that contains both sets of
  changes and warnings about conflicts.  The sdiff command can be used
  to merge two files interactively.

  Install diffutils if you need to compare text files.


pkgId: fc7ce23c591092618f9aec45ea178f68a84b6e418e06f2e69e6239e898c4759b
name: digitemp
arch: src
version: 3.7.2
epoch: 0
release: 12.fc40
summary: Dallas Semiconductor 1-wire device reading console application
url: https://www.digitemp.com/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/digitemp-3.7.2-12.fc40.src.rpm
checksum_type: sha256
description:
  DigiTemp is a simple to use console application for reading values from
  Dallas Semiconductor 1-wire devices. Its main use is for reading temperature
  sensors, but it also reads counters and understands the 1-wire hubs with
  devices on different branches of the network. DigiTemp now supports the
  following 1-wire temperature sensors: DS18S20 (and DS1820), DS18B20, DS1822,
  the DS2438 Smart Battery Monitor, DS2422 and DS2423 Counters, DS2409
  MicroLAN Coupler (used in 1-wire hubs) and the AAG TAI-8540 humidity sensor.


pkgId: 3a3e5803e30db38e950ca85fbff3262a21109eab611a82c0a2e80279c7dccda4
name: ding-libs
arch: src
version: 0.6.2
epoch: 0
release: 56.fc40
summary: "Ding is not GLib" assorted utility libraries
url: https://pagure.io/SSSD/ding-libs
rpm_license: LGPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ding-libs-0.6.2-56.fc40.src.rpm
checksum_type: sha256
description:
  A meta-package that pulls in libcollection, libdhash, libini_config,
  librefarray libbasicobjects, and libpath_utils.


pkgId: 34f99e449fa6ae0cfd5f2d56af6b6443f4d8a531d812ec7434c88532bc02dccc
name: dionaea
arch: src
version: 0.7.0
epoch: 0
release: 28.fc40
summary: Low interaction honeypot
url: https://dionaea.readthedocs.io/
rpm_license: GPLv2 with exceptions
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dionaea-0.7.0-28.fc40.src.rpm
checksum_type: sha256
description:
  Dionaea honeypot is meant to be a nepenthes successor, embedding python
  as scripting language, using libemu to detect shell-codes, supporting
  ipv6 and TLS.


pkgId: 65caed202119415a47264e252e60c6daed0b63bce2817d347b0275e9dec1815f
name: discount
arch: src
version: 2.2.7
epoch: 0
release: 6.fc40
summary: A command-line utility for converting Markdown files into HTML
url: http://www.pell.portland.or.us/~orc/Code/discount
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/discount-2.2.7-6.fc40.src.rpm
checksum_type: sha256
description:
  DISCOUNT is an implementation of John Gruber's Markdown language in C.
  It includes all of the original Markdown features, along with a few
  extensions, and passes the Markdown test suite.


pkgId: 98ada801d1ccf9de3cf47241db957c45b99b758b55f62f27c08d00ad7005d1a2
name: disk-utilities
arch: src
version: 2021.03.20
epoch: 0
release: 8.fc40
summary: Utilities for ripping, dumping, analysing, and modifying disk images
url: https://github.com/keirf/Disk-Utilities
rpm_license: Unlicense
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/disk-utilities-2021.03.20-8.fc40.src.rpm
checksum_type: sha256
description:
  Disk Utilities is a collection of utilities for ripping, dumping, analysing,
  and modifying disk images.


pkgId: e881a4564a406a9e803d3ac4bc83f662daeaedc1bcf2c9e2721a6a2f8bdf6ae5
name: disktype
arch: src
version: 9
epoch: 0
release: 42.fc40
summary: Detect the content format of a disk or disk image
url: http://disktype.sourceforge.net/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/disktype-9-42.fc40.src.rpm
checksum_type: sha256
description:
  The purpose of disktype is to detect the content format of a disk or disk
  image. It knows about common file systems, partition tables, and boot codes.


pkgId: 0bde266cca9d014c7c22b11238694a63ba946b02aba38affbce6e9ffa0eec425
name: distro-info
arch: src
version: 0.18
epoch: 0
release: 20.fc40
summary: Provides information about releases of Debian and Ubuntu
url: https://tracker.debian.org/pkg/distro-info
rpm_license: ISC
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/distro-info-0.18-20.fc40.src.rpm
checksum_type: sha256
description:
  Information about all releases of Debian and Ubuntu. The distro-info script
  will give you the codename for e.g. the latest stable release of your
  distribution. To get information about a specific distribution there are the
  debian-distro-info and the ubuntu-distro-info scripts.


pkgId: 9d1c91294170f6f8c69eef5b9f5caa5545e81620f313ffbbcc6c62b4eb735c63
name: distro-info-data
arch: src
version: 0.42
epoch: 0
release: 11.fc40
summary: Information about releases of Debian and Ubuntu (data files)
url: https://tracker.debian.org/pkg/distro-info-data
rpm_license: ISC
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/distro-info-data-0.42-11.fc40.src.rpm
checksum_type: sha256
description:
  Information about all releases of Debian and Ubuntu. The distro-info script
  will give you the codename for e.g. the latest stable release of your
  distribution. To get information about a specific distribution there are the
  debian-distro-info and the ubuntu-distro-info scripts.

  This package contains the data files.


pkgId: 68f07e75e6a540c0ded9cb48ac4a3168fa3d85d97dd0a551c6805fabff2a78ff
name: distrobox
arch: src
version: 1.7.0.1
epoch: 0
release: 1.fc40
summary: Another tool for containerized command line environments on Linux
url: https://github.com/89luca89/distrobox
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/distrobox-1.7.0.1-1.fc40.src.rpm
checksum_type: sha256
description:
  Use any linux distribution inside your terminal. Distrobox uses podman
  or docker to create containers using the linux distribution of your
  choice. Created container will be tightly integrated with the host,
  allowing to share the HOME directory of the user, external storage,
  external usb devices and graphical apps (X11/Wayland) and audio.


pkgId: 4d20853a0da15f92139e9059d18f856c059e70511e16bc3382ee2add45397fc4
name: djview4
arch: src
version: 4.12
epoch: 0
release: 9.fc40
summary: DjVu viewer
url: http://djvu.sourceforge.net/djview4.html
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/djview4-4.12-9.fc40.src.rpm
checksum_type: sha256
description:
  DjView4 is a DjVu document viewer with the following features:
   o continuous scrolling of pages
   o side-by-side display of pages
   o display thumbnails as a grid
   o display outlines
   o page names supported
   o metadata dialog

  It is based on DjVuLibre and Qt5.


pkgId: 1dfd164e9a88b442564b10a39ee11e9e006ed064c2cfbdb5230c9e16d3a08fdb
name: dkms
arch: src
version: 3.0.13
epoch: 0
release: 1.fc40
summary: Dynamic Kernel Module Support Framework
url: http://linux.dell.com/dkms
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dkms-3.0.13-1.fc40.src.rpm
checksum_type: sha256
description:
  This package contains the framework for the Dynamic Kernel Module Support (DKMS)
  method for installing module RPMS as originally developed by Dell.


pkgId: 56ec7d1f29c7aa1f169721e915cbe9ba93ac13b4513307888442bc3e4d882450
name: dl
arch: src
version: 0.19
epoch: 0
release: 1.fc40
summary: Download Ticket Service
url: http://www.thregr.org/~wavexx/software/dl/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dl-0.19-1.fc40.src.rpm
checksum_type: sha256
description:
  dl is a file exchange service that allows you to upload any file to a web
  server and generate a unique ticket for others to download. The ticket is
  automatically expired according to the specified rules, so that you don't need
  to keep track or cleanup afterward. dl also allows you to grant an anonymous,
  one-time upload for others to send *you* a file, without the requirement of
  account management.

  dl is usually installed as a "email attachments replacement" due to its
  simplicity (though can be used in other ways).


pkgId: e8dbc249153b28fdb1e06ed183fa182ba132ae4e010b4c5f04e7beb78975f460
name: dleyna
arch: src
version: 0.8.3
epoch: 0
release: 3.fc40
summary: Services and D-Bus APIs for UPnP access
url: https://gitlab.gnome.org/World/dLeyna
rpm_license: LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dleyna-0.8.3-3.fc40.src.rpm
checksum_type: sha256
description:
  dLeyna is a set of services and D-Bus APIs that aim to simplify access to UPnP
  and DLNA media devices in a network.


pkgId: ab19f19b365e9e5c6358637da05471d918a66eb4e0e2cb0fff09e0ecd5b7646f
name: dm-zoned-tools
arch: src
version: 2.2.2
epoch: 0
release: 4.fc40
summary: Provides utilities to format, check and repair Linux dm-zoned devices
url: https://github.com/westerndigitalcorporation/dm-zoned-tools
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dm-zoned-tools-2.2.2-4.fc40.src.rpm
checksum_type: sha256
description:
  This package provides the dmzadm utility which can be used to format,
  check and repair zoned block devices used with Linux dm-zoned device
  mapper target driver.


pkgId: e3c65d578fc9ae22d928163211f03ca0370e17a153160e10ac98ac68abb4549e
name: dmenu
arch: src
version: 5.2
epoch: 0
release: 5.fc40
summary: Generic menu for X
url: http://tools.suckless.org/dmenu
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dmenu-5.2-5.fc40.src.rpm
checksum_type: sha256
description:
  Dynamic menu is a generic menu for X, originally designed for dwm. It manages
  huge amounts (up to 10.000 and more) of user defined menu items efficiently.


pkgId: bc2654bc8e740bc0dd51313e86cf2d46ea1bc712adc04647c15184eb80fcfe73
name: dmg2img
arch: src
version: 1.6.7
epoch: 0
release: 19.20170502.git.f16f247.fc40
summary: Uncompress the Apple compressed disk image files
url: http://vu1tur.eu.org/tools/
rpm_license: GPL+ and MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dmg2img-1.6.7-19.20170502.git.f16f247.fc40.src.rpm
checksum_type: sha256
description:
  This package contains dmg2img utility that is able to uncompress compressed dmg
  files into plain disk or filesystem images.


pkgId: 57d23db3bcbbb0be1d18cb959b2b745335af9842f11adcbe06dcd2ebc514b19c
name: dmidecode
arch: src
version: 3.5
epoch: 1
release: 3.fc40
summary: Tool to analyse BIOS DMI data
url: https://www.nongnu.org/dmidecode/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dmidecode-3.5-3.fc40.src.rpm
checksum_type: sha256
description:
  dmidecode reports information about x86 & ia64 hardware as described in the
  system BIOS according to the SMBIOS/DMI standard. This information
  typically includes system manufacturer, model name, serial number,
  BIOS version, asset tag as well as a lot of other details of varying
  level of interest and reliability depending on the manufacturer.

  This will often include usage status for the CPU sockets, expansion
  slots (e.g. AGP, PCI, ISA) and memory module slots, and the list of
  I/O ports (e.g. serial, parallel, USB).


pkgId: f0632d68ffc8e7fb7916492d921506a7b593f20f003125a0f88747c6399c938c
name: dmtcp
arch: src
version: 3.0.0
epoch: 0
release: 3.fc40
summary: Distributed MultiThreaded CheckPointing
url: http://dmtcp.sourceforge.net
rpm_license: LGPL-3.0-or-later AND (MIT OR BSD-3-Clause)
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dmtcp-3.0.0-3.fc40.src.rpm
checksum_type: sha256
description:
  DMTCP is a tool to transparently checkpoint the state of multiple simultaneous
  applications, including multi-threaded and distributed applications. It operates
  directly on the user binary executable, without any Linux kernel modules or
  other kernel modifications.

  Among the applications supported by DMTCP are MPI (various implementations),
  OpenMP, MATLAB, Python, Perl, R, and many programming languages and shell
  scripting languages. DMTCP also supports GNU screen sessions, including
  vim/cscope and emacs. With the use of TightVNC, it can also checkpoint and
  restart X Window applications. For a multilib (mixture of 32- and 64-bit
  processes), see "./configure --enable-multilib".

  DMTCP supports the commonly used OFED API for InfiniBand, as well as its
  integration with various implementations of MPI, and resource managers (e.g.,
  SLURM).

  This package contains DMTCP binaries.


pkgId: d74d4f6103697c360d316287c16987a4491aabcbd367b322a37c9203cf7782dc
name: dmtx-utils
arch: src
version: 0.7.6
epoch: 0
release: 18.fc40
summary: Tools for working with Data Matrix 2D bar-codes
url: https://github.com/dmtx
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dmtx-utils-0.7.6-18.fc40.src.rpm
checksum_type: sha256
description:
  libdmtx is open source software for reading and writing Data Matrix 2D
  bar-codes on Linux, Unix, OS X, Windows, and mobile devices. At its core
  libdmtx is a shared library, allowing C/C++ programs to use its capabilities
  without restrictions or overhead.

  The included utility programs, dmtxread and dmtxwrite, provide the official
  interface to libdmtx from the command line, and also serve as a good reference
  for programmers who wish to write their own programs that interact with
  libdmtx.


pkgId: 1af206a8884d36a74f23b73616f49b27ebb967c1af778a861e749979d1f6ecdf
name: dnf-plugin-flunk_dependent_remove
arch: src
version: 1.0
epoch: 0
release: 13.fc40
summary: DNF plugin to prevent removing packages recursively via automation
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dnf-plugin-flunk_dependent_remove-1.0-13.fc40.src.rpm
checksum_type: sha256
description:
  Do not allow "dnf -y remove" to expand the list of packages to remove to
  include packages which require one of the explicitly listed packages.
  Fail the request instead. This is implemented via a DNF plugin.


pkgId: 95122404924c1f3d69056f8218d119ff7ad298f26cee24a8ca50e9f3bc16a7e0
name: dnsdist
arch: src
version: 1.9.0
epoch: 0
release: 1.fc40
summary: Highly DNS-, DoS- and abuse-aware loadbalancer
url: https://dnsdist.org
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dnsdist-1.9.0-1.fc40.src.rpm
checksum_type: sha256
description:
  dnsdist is a highly DNS-, DoS- and abuse-aware loadbalancer. Its goal in life
  is to route traffic to the best server, delivering top performance to
  legitimate users while shunting or blocking abusive traffic.


pkgId: 98c2c0d788be10b61c224dfc27f90a49e038060ef7dfe75e4b9a1f4ee7cc7ee3
name: dnsenum
arch: src
version: 1.2.4.2
epoch: 0
release: 27.fc40
summary: A tool to enumerate DNS info about domains
url: https://github.com/fwaeytens/dnsenum
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dnsenum-1.2.4.2-27.fc40.src.rpm
checksum_type: sha256
description:
  The purpose of this tool is to gather as much information as possible about a
  domain. The program currently gathers A, NS, MX records, performs axfr queries,
  gets extra names and subdomains via google scraping, bruteforces subdomains from
  file, calculate C class domain network ranges, perform reverse lookups on
  netranges, writes ip-blocks to domain_ips.txt.


pkgId: 70cf093316612769b53247f31ac49bc7d027bb3e40fc531b311de77821019fa7
name: dnsmap
arch: src
version: 0.36
epoch: 0
release: 3.fc40
summary: Sub-domains bruteforcer
url: https://github.com/resurrecting-open-source-projects/dnsmap
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dnsmap-0.36-3.fc40.src.rpm
checksum_type: sha256
description:
  dnsmap is a small tool that perform brute-forcing of domains.
  It can use a built-in list or an external dictionary file and
  saves output to TXT/CSV format.


pkgId: 6da21ef6220d8df5c841334d793b1959f212833cc77333a6cde788bab5829b66
name: dnssec-nodes
arch: src
version: 2.1
epoch: 0
release: 22.fc40
summary: DNS Visualization Tool
url: http://www.dnssec-tools.org/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dnssec-nodes-2.1-22.fc40.src.rpm
checksum_type: sha256
description:
  A graphical DNS visualization application, specializing in DNSSEC.
  The DNSSEC-Nodes application is a graphical debugging utility that
  allows administrators to watch the data being logged into a libval or
  bind logging file.


pkgId: d755a01267f00d1fce956d19610ae3f3585d40a881227dd4860614297b1377ae
name: dnssec-system-tray
arch: src
version: 2.1
epoch: 0
release: 23.fc40
summary: System Tray for monitoring log files for DNSSEC errors
url: http://www.dnssec-tools.org/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dnssec-system-tray-2.1-23.fc40.src.rpm
checksum_type: sha256
description:
  A simply system-tray application that monitors log files (eg libval,
  or bind/named logfiles) for DNSSEC error messages that should be
  displayed to the user.


pkgId: 13c9723c52e2343e608ca67253fcf4bf5d85ece97d543500a1916af9a8a73bca
name: dnssec-tools
arch: src
version: 2.2.3
epoch: 0
release: 23.fc40
summary: A suite of tools for managing dnssec aware DNS usage
url: http://www.dnssec-tools.org/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dnssec-tools-2.2.3-23.fc40.src.rpm
checksum_type: sha256
description:
  The goal of the DNSSEC-Tools project is to create a set of tools,
  patches, applications, wrappers, extensions, and plugins that will
  help ease the deployment of DNSSEC-related technologies.


pkgId: dbafd8cd9eab55354571bf9a6b12e543795faa495ac481c391178712bbef8a7a
name: dnstop
arch: src
version: 20140915
epoch: 0
release: 21.git20201122.fc40
summary: Displays information about DNS traffic on your network
url: http://dns.measurement-factory.com/tools/dnstop/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dnstop-20140915-21.git20201122.fc40.src.rpm
checksum_type: sha256
description:
  dnstop is a libpcap application (ala tcpdump) that displays various
  tables of DNS traffic on your network.

  dnstop supports both IPv4 and IPv6 addresses.

  To help find especially undesirable DNS queries, dnstop provides a
  number of filters.

  dnstop can either read packets from the live capture device, or from a
  tcpdump savefile.


pkgId: 757372c581ccc3f379982253d7fb6b71b9524eebfdc8ea5a71b0b7ee9e0fe1b8
name: dnstracer
arch: src
version: 1.10
epoch: 0
release: 5.fc40
summary: Trace DNS queries to the source
url: http://www.mavetju.org/unix/dnstracer.php
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dnstracer-1.10-5.fc40.src.rpm
checksum_type: sha256
description:
  dnstracer determines where a given Domain Name Server (DNS) gets its
  information from, and follows the chain of DNS servers back to the
  servers which know the data.


pkgId: 5dd340608814ff2dcbf17b2a4392a82c17a3d880409b2ffd379441e00a0c6035
name: dnsviz
arch: src
version: 0.9.4
epoch: 0
release: 10.fc40
summary: Tools for analyzing and visualizing DNS and DNSSEC behavior
url: https://github.com/dnsviz/dnsviz
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dnsviz-0.9.4-10.fc40.src.rpm
checksum_type: sha256
description:
  DNSViz is a tool suite for analysis and visualization of Domain Name System
  (DNS) behavior, including its security extensions (DNSSEC).  This tool suite
  powers the Web-based analysis available at http://dnsviz.net/


pkgId: e9d4f321ad0c52d3f7aeff11fa41e03bb26d29977043110332388ec848748921
name: docbook-dtds
arch: src
version: 1.0
epoch: 0
release: 85.fc40
summary: SGML and XML document type definitions for DocBook
url: http://www.oasis-open.org/docbook/
rpm_license: Copyright only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/docbook-dtds-1.0-85.fc40.src.rpm
checksum_type: sha256
description:
  The DocBook Document Type Definition (DTD) describes the syntax of
  technical documentation texts (articles, books and manual pages).
  This syntax is XML-compliant and is developed by the OASIS consortium.
  This package contains SGML and XML versions of the DocBook DTD.


pkgId: 3d875a0fc86f9ae24226dc66d497cd5c56549f8d53552cde8672d84fed4ebeb0
name: docbook-simple
arch: src
version: 1.1
epoch: 0
release: 32.fc40
summary: Simplified DocBook is a small subset of the DocBook XML DTD
url: http://www.oasis-open.org/docbook/xml/simple/
rpm_license: Freely redistributable without restriction
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/docbook-simple-1.1-32.fc40.src.rpm
checksum_type: sha256
description:
  Simplified DocBook is an attempt to provide a proper subset of DocBook
  that is simultaneously smaller and still useful. Documents written in
  the subset must be 100% legal DocBook documents. This is a subset for
  single documents (articles, white papers, etc.), so there's no need
  for books or sets, just 'articles'. Simplified DocBook documents are
  viewable in online browsers if styled with CSS. (it's XML not SGML).


pkgId: 407ca161b06613276c1adbbaa7191c93c59283602b4584d30a090abafe26f111
name: docbook-slides
arch: src
version: 3.4.0
epoch: 0
release: 33.fc40
summary: DocBook Slides document type and stylesheets
url: http://sourceforge.net/projects/docbook
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/docbook-slides-3.4.0-33.fc40.src.rpm
checksum_type: sha256
description:
  DocBook Slides provides customization layers of the both the
  Simplified and the full DocBook XML DTD, as well as the DocBook XSL
  Stylesheets. This package contains the XML document type definition
  and stylesheets for processing DocBook Slides XML. The slides doctype
  and stylesheets are for generating presentations, primarily in HTML.


pkgId: 81dc6f716f0e9653348d240c11943927dabbc196cf9b98c09f6b797854ff025d
name: docbook-style-dsssl
arch: src
version: 1.79
epoch: 0
release: 39.fc40
summary: Norman Walsh's modular stylesheets for DocBook
url: http://docbook.sourceforge.net/
rpm_license: LicenseRef-DMIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/docbook-style-dsssl-1.79-39.fc40.src.rpm
checksum_type: sha256
description:
  These DSSSL stylesheets allow to convert any DocBook document to another
  printed (for example, RTF or PostScript) or online (for example, HTML) format.
  They are highly customizable.


pkgId: 1e7d075b05d2ebad55513808810c3fea74c7c73393e5e59ab2520d2852cded6b
name: docbook-style-xsl
arch: src
version: 1.79.2
epoch: 0
release: 22.fc40
summary: Norman Walsh's XSL stylesheets for DocBook XML
url: https://github.com/docbook/xslt10-stylesheets
rpm_license: LicenseRef-DMIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/docbook-style-xsl-1.79.2-22.fc40.src.rpm
checksum_type: sha256
description:
  These XSL stylesheets allow you to transform any DocBook XML document to
  other formats, such as HTML, FO, and XHMTL.  They are highly customizable.


pkgId: fd87bf11403f0de06317af5ac44181f15085cecba57de4bcc95fc94e3dab8d2e
name: docbook-utils
arch: src
version: 0.6.14
epoch: 0
release: 60.fc40
summary: Shell scripts for managing DocBook documents
url: http://sources.redhat.com/docbook-tools/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/docbook-utils-0.6.14-60.fc40.src.rpm
checksum_type: sha256
description:
  This package contains scripts are for easy conversion from DocBook
  files to other formats (for example, HTML, RTF, and PostScript), and
  for comparing SGML files.


pkgId: 31c015096d535973ba764c0d5ed804e655ed4bdf1077c850e57ebfaa9321429c
name: docbook5-schemas
arch: src
version: 5.1
epoch: 0
release: 10.fc40
summary: Norman Walsh's schemas (DTD, Relax NG, W3C schema) for Docbook 5.X
url: http://www.oasis-open.org/docbook/
rpm_license: Freely redistributable without restriction
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/docbook5-schemas-5.1-10.fc40.src.rpm
checksum_type: sha256
description:
  Docbook 5.X is a complete rewrite of Docbook in RELAX NG and not compatible
  with previous Docbook versions. This package contains Relax NG , DTD and W3C
  schema for Docbook 5.X. Syntax of those schemas is XML-compliant and is
  developed by the OASIS consortium.


pkgId: 688789ed23904eba8d9c1ed5f967e4ba00e23e1c405e6f1febfe1adb279f83b1
name: docbook5-style-xsl
arch: src
version: 1.79.2
epoch: 0
release: 18.fc40
summary: Norman Walsh's XSL stylesheets for DocBook 5.X
url: https://github.com/docbook/xslt10-stylesheets
rpm_license: MIT and MPLv1.1
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/docbook5-style-xsl-1.79.2-18.fc40.src.rpm
checksum_type: sha256
description:
  These XSL namespace aware stylesheets allow you to transform any
  DocBook 5 document to other formats, such as HTML, manpages, FO,
  XHMTL and other formats. They are highly customizable. For more
  information see W3C page about XSL.


pkgId: 291a2cb62984078338e1ef0a2a51e49e97bd2d1f401ea90aa1d3cf616af53446
name: doclifter
arch: src
version: 2.20
epoch: 0
release: 6.fc40
summary: Translates documents written in troff macros to DocBook
url: http://www.catb.org/~esr/doclifter/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/doclifter-2.20-6.fc40.src.rpm
checksum_type: sha256
description:
  The doclifter program translates documents written in troff macros to DocBook.

  Lifting documents from presentation level to semantic level is hard, and
  a really good job requires human polishing.  This tool aims to do everything
  that can be mechanized, and to preserve any troff-level information that might
  have structural implications in XML comments.

  This tool does the hard parts.  TBL tables are translated into DocBook
  table markup, PIC into SVG, and EQN into MathML (relying on pic2svg
  and GNU eqn for the last two).


pkgId: bd7dbfcd58291b7c8c4cf6791952837976e8f61a4efc76044bf3d98f011530a8
name: docparser
arch: src
version: 1.0.1
epoch: 0
release: 6.fc40
summary: A document parser library ported from document2html
url: https://github.com/linuxdeepin/docparser
rpm_license: GPLv3+ and Boost and MIT and zlib
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/docparser-1.0.1-6.fc40.src.rpm
checksum_type: sha256
description:
  This file content analysis library is provided for the full-text search function
  of document management.


pkgId: bb128aaeb285f218b737c5956bd7203c21b2f7b0faf8e95f34312b4bb3d1cf49
name: dogtail
arch: src
version: 0.9.11
epoch: 0
release: 20.fc40
summary: GUI test tool and automation framework
url: https://gitlab.com/dogtail/dogtail/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dogtail-0.9.11-20.fc40.src.rpm
checksum_type: sha256
description:
  GUI test tool and automation framework that uses assistive technologies to
  communicate with desktop applications.


pkgId: 462d3382c4b20afdd4522c314ed78c3344e3eb860ae61c883b344d5ea68d541c
name: doh
arch: src
version: 0.1
epoch: 0
release: 12.fc40
summary: Application for DNS-over-HTTPS name resolves and lookups
url: https://github.com/curl/doh
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/doh-0.1-12.fc40.src.rpm
checksum_type: sha256
description:
  A libcurl-using application that resolves a host name using DNS-over-HTTPS
  (DoH).  This code uses POST requests unconditionally for this.


pkgId: 6c28880eabdcfbe5a2e1b0419e626a73af2f9891b00932fc4aaf8075caa02da2
name: dolphin-connector
arch: src
version: 1.2
epoch: 0
release: 38.fc40
summary: Simple MySQL C API wrapper for C++
url: https://github.com/poetinha/dolphin-connector
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dolphin-connector-1.2-38.fc40.src.rpm
checksum_type: sha256
description:
  Dolphin Connector is a simple MySQL C API wrapper for C++.

  It is originally designed to be as efficient as is possible,
  and makes no use of exceptions.


pkgId: e903ef712659193b4039c5b39c7edebc72c4704315b064cedd12945b59dfd410
name: domtt
arch: src
version: 0.7.3
epoch: 0
release: 26.fc40
summary: DOM Tooltip (aka domTT) is a Javascript widget
url: http://www.mojavelinux.com/projects/domtooltip/
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/domtt-0.7.3-26.fc40.src.rpm
checksum_type: sha256
description:
  DOM Tooltip (aka domTT) is a Javascript widget, released under the Apache 2.0
  license, which allows developers to add customized tool-tips to their web sites.


pkgId: e384b2aa842bfa889c602d25775221b1c57f6d2730dc39a930db1a752e7bbe7b
name: dot2tex
arch: src
version: 2.11.3
epoch: 0
release: 20.fc40
summary: A Graphviz to LaTeX converter
url: http://www.fauskes.net/code/dot2tex/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dot2tex-2.11.3-20.fc40.src.rpm
checksum_type: sha256
description:
  Dot2tex is a tool for converting graphs rendered by Graphviz to formats
  that can be used with LaTeX.


pkgId: d905d0b6ba3de2416454129ba02e19226af52d9d106d01895dbabfb5071674bb
name: doxy2man
arch: src
version: 0
epoch: 0
release: 27.fc40
summary: Create man pages from doxygen XML output
url: https://github.com/gsauthof/doxy2man
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/doxy2man-0-27.fc40.src.rpm
checksum_type: sha256
description:
  Doxy2man takes the XML generated by Doxygen as input and creates several
  man pages from that. It creates a summary man page for a header and for
  each function a detailed man page. The output is optimized for C projects.
  It supports the most common doxygen features, e.g. implicit and explicit
  see also tags, copyright, author information, brief and detailed
  descriptions, etc.


pkgId: f3907fb777659a7f00cc55d6d5849cfc87c05f2e6abb5eb01f0ebb3bae8e82d1
name: dpdk
arch: src
version: 22.11.1
epoch: 2
release: 4.fc40
summary: Set of libraries and drivers for fast packet processing
url: http://dpdk.org
rpm_license: BSD and LGPLv2 and GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dpdk-22.11.1-4.fc40.src.rpm
checksum_type: sha256
description:
  The Data Plane Development Kit is a set of libraries and drivers for
  fast packet processing in the user space.


pkgId: 44e366761f26842da36b5983b86ef5934958fd8cb0913a0411e19c4a48c06e88
name: dpkg
arch: src
version: 1.21.21
epoch: 0
release: 4.fc40
summary: Package maintenance system for Debian Linux
url: https://tracker.debian.org/pkg/dpkg
rpm_license: GPLv2 and GPLv2+ and LGPLv2+ and Public Domain and BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dpkg-1.21.21-4.fc40.src.rpm
checksum_type: sha256
description:
  This package provides the low-level infrastructure for handling the
  installation and removal of Debian software packages.

  This package contains the tools (including dpkg-source) required
  to unpack, build and upload Debian source packages.

  This package also contains the programs dpkg which used to handle the
  installation and removal of packages on a Debian system.

  This package also contains dselect, an interface for managing the
  installation and removal of packages on the system.

  dpkg and dselect will certainly be non-functional on a rpm-based system
  because packages dependencies will likely be unmet.


pkgId: f014944a9d25144929e22c1dcde6cd7a3d5e105078b638228cb6b467d225e0bc
name: dpkg
arch: src
version: 1.22.11
epoch: 0
release: 1
summary: Package maintenance system for Debian Linux
url: https://tracker.debian.org/pkg/dpkg
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dpkg-1.22.11-1.src.rpm
checksum_type: sha256
description:
  This package provides the low-level infrastructure for handling the
  installation and removal of Debian software packages.

  This package contains the tools (including dpkg-source) required
  to unpack, build and upload Debian source packages.

  This package also contains the programs dpkg which used to handle the
  installation and removal of packages on a Debian system.

  This package also contains dselect, an interface for managing the
  installation and removal of packages on the system.

  dpkg and dselect will certainly be non-functional on a rpm-based system
  because packages dependencies will likely be unmet.

rpm_license:
  GPL-2.0-only AND GPL-2.0-or-later AND LicenseRef-Callaway-LGPLv2+ AND LicenseRef-Callaway-Public-Domain AND LicenseRef-Callaway-BSD


pkgId: 580549ebaf93dca0132d7f2b5660e70ac9e9b05d822c23ed14dabff74242c3d1
name: dqlite
arch: src
version: 1.16.0
epoch: 0
release: 2.fc40
summary: Embeddable, replicated and fault tolerant SQL engine
url: https://github.com/canonical/dqlite
rpm_license: LGPL-3.0-only WITH LGPL-3.0-linking-exception
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dqlite-1.16.0-2.fc40.src.rpm
checksum_type: sha256
description:
  dqlite is a C library that implements an embeddable and replicated SQL database
  engine with high-availability and automatic failover.


pkgId: d5025929bfad6cc20a961353c512378f8aa686874363f3ab9956594af5b63526
name: drat-trim
arch: src
version: 0
epoch: 0
release: 0.24.20240309git89ddbfb.fc40
summary: Proof checker for DIMACS proofs
url: https://github.com/marijnheule/drat-trim
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/drat-trim-0-0.24.20240309git89ddbfb.fc40.src.rpm
checksum_type: sha256
description:
  The proof checker DRAT-trim can be used to check whether a
  propositional formula in the DIMACS format is unsatisfiable.  Given a
  propositional formula and a clausal proof, DRAT-trim validates that the
  proof is a certificate of unsatisfiability of the formula.  Clausal
  proofs should be in the DRAT format which is used to validate the
  results of the SAT competitions.


pkgId: 5e8b733e51d7679556f005db046a6388ec0d201ac295d238873c5d2add2f1a41
name: drawing
arch: src
version: 1.0.2
epoch: 0
release: 4.fc40
summary: Simple image editor for Linux
url: https://github.com/maoschanz/drawing
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/drawing-1.0.2-4.fc40.src.rpm
checksum_type: sha256
description:
  This simple image editor, similar to Microsoft Paint, is aiming at the GNOME
  desktop.

  PNG, JPEG and BMP files are supported.

  Besides GNOME, the app is well integrated in traditional-looking desktops, as
  well as elementaryOS.

  It should also be compatible with the Pinephone and Librem 5 smartphones.


pkgId: d10e5b39511be87a1662bdf4e12382c8797ab7411f36a48c757ec0c51cebf4b7
name: drbd
arch: src
version: 9.26.0
epoch: 0
release: 3.fc40
summary: DRBD user-land tools and scripts
url: http://www.drbd.org/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/drbd-9.26.0-3.fc40.src.rpm
checksum_type: sha256
description:
  DRBD refers to block devices designed as a building block to form high
  availability (HA) clusters. This is done by mirroring a whole block device
  via an assigned network. DRBD can be understood as network based raid-1.

  This is a virtual package, installing the full user-land suite.


pkgId: 58b6c5fed79e276d955e1c6dc9a4a28e1cf6cda1e2660abfa50835749f6638a2
name: dreamweb
arch: src
version: 1.1
epoch: 0
release: 20.fc40
summary: Click-and-point adventure with the look and feel of Ridley Scott's Blade Runner
url: http://www.mobygames.com/game/dreamweb
rpm_license: Redistributable, no modification permitted
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dreamweb-1.1-20.fc40.src.rpm
checksum_type: sha256
description:
  Ryan, a bartender from a dystopian future can't sleep peacefully
  for months.  His nights are sequences of nightmares and strange
  dreams, days with frequent black-outs with strange visions, until
  one night a figure in monk attire appears to him, and tells him the
  story of the seven evil ones, uniting to destroy to Dreamweb, the
  only barrier between the world and darkness.  The monk makes a
  proposition:  Ryan becomes the "deliverer":  the one who would keep
  the Dreamweb safe by killing those who try to destroy it.

  Descending into paranoia and just wanting dreams to stop, Ryan
  accepts the mission, then wakes up in a puddle of cold sweat, next
  to his beloved girlfriend in her house, and late for work.  Again.

  DreamWeb is a top-down adventure game set in a gritty futuristic
  dystopian city.  Each location takes only a small portion of the
  screen without panning (except an optional small zoom window in the
  corner that follows the cursor), with the player interacting with
  objects and people by simply clicking them.  Ryan has a limited
  inventory space, and as a lot of objects can be picked up (many
  without any use), the player must rationalize what might be useful
  and what just serves as filler.

  Dialogue is straightforward, with no options, but still required
  to advance in the game (to find new locations, for instance).  In
  situations where many adventure games usually feature an indirect
  approach to solve a problem, Ryan often faces himself with
  situations where it's "killed or be killed", which result in deaths
  (sometimes of innocents).


pkgId: 746b79e2afad72a090de4a78778771190be2aafc19919149d5381985db55edee
name: drehatlas-widelands-fonts
arch: src
version: 1.0.3.1
epoch: 0
release: 32.fc40
summary: A Latin typeface inspired by feudal calligraphy
url: http://www.drehatlas.de/
rpm_license: OFL
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/drehatlas-widelands-fonts-1.0.3.1-32.fc40.src.rpm
checksum_type: sha256
description:
  This font was created by Peter Schwanemann as a logo for the Widelands project,
  but has since been enhanced.  The font is decorative and not really usable for
  real texts, but it looks nice for logos, banners or similar stuff.  All normal
  latin glyphs and arabic numbers are included and usable.


pkgId: bb0bdb8a8549f42da9e4b92e74567f1b9d85d66d8e0b8de6cdd3b24560bc586c
name: drgeo
arch: src
version: 1.1.0
epoch: 0
release: 51.fc40
summary: Interactive educational geometry software
url: http://www.ofset.org/drgeo
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/drgeo-1.1.0-51.fc40.src.rpm
checksum_type: sha256
description:
  Dr. Geo is an interactive geometry GUI application. It allows one to create
  geometric figures plus the interactive manipulation of such figure in
  respect with their geometric constraints. It is usable in teaching
  situation with students from primary or secondary level.


pkgId: 3ebb556e2d744b41a5ccf852a7f0d66b50c6c8474fad53dcebfe214abfe78e1b
name: driverctl
arch: src
version: 0.101
epoch: 0
release: 14.fc40
summary: Device driver control utility
url: https://gitlab.com/driverctl/driverctl
rpm_license: LGPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/driverctl-0.101-14.fc40.src.rpm
checksum_type: sha256
description:
  driverctl is a tool for manipulating and inspecting the system
  device driver choices.

  Devices are normally assigned to their sole designated kernel driver
  by default. However in some situations it may be desireable to
  override that default, for example to try an older driver to
  work around a regression in a driver or to try an experimental alternative
  driver. Another common use-case is pass-through drivers and driver
  stubs to allow userspace to drive the device, such as in case of
  virtualization.

  driverctl integrates with udev to support overriding
  driver selection for both cold- and hotplugged devices from the
  moment of discovery, but can also change already assigned drivers,
  assuming they are not in use by the system. The driver overrides
  created by driverctl are persistent across system reboots
  by default.


pkgId: ba664fc781b00e60e09b3bb21f59df496e07835d5e5d4923444be31dfd7646ef
name: dropbear
arch: src
version: 2022.83
epoch: 0
release: 3.fc40
summary: Lightweight SSH server and client
url: https://matt.ucc.asn.au/dropbear/dropbear.html
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dropbear-2022.83-3.fc40.src.rpm
checksum_type: sha256
description:
  Dropbear is a relatively small SSH server and client. It's particularly useful
  for "embedded"-type Linux (or other Unix) systems, such as wireless routers.


pkgId: 25723404641185503754f91768c8576b641ad36c0c596e4000296276156a20e6
name: drraw
arch: src
version: 2.2
epoch: 0
release: 0.32.b2.fc40
summary: Web based presentation front-end for RRDtool
url: http://web.taranis.org/drraw/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/drraw-2.2-0.32.b2.fc40.src.rpm
checksum_type: sha256
description:
  drraw is a simple web based presentation front-end for RRDtool that allows you
  to interactively build graphs of your own design. A graph definition can be
  turned into a template which may be applied to many Round Robin Database files.
  drraw specializes in providing an easy mean of displaying data stored with
  RRDtool and does not care about how the data is collected, making it a great
  complement to other RRDtool front-ends.


pkgId: 13f7a2658e9557dad7c69a0f509fbeb29abf5d2de112874d11d370a315139af0
name: drupal7
arch: src
version: 7.98
epoch: 0
release: 3.fc40
summary: An open-source content-management platform
url: https://www.drupal.org
rpm_license: GPLv2+ and BSD and MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/drupal7-7.98-3.fc40.src.rpm
checksum_type: sha256
description:
  Equipped with a powerful blend of features, Drupal is a Content Management
  System written in PHP that can support a variety of websites ranging from
  personal weblogs to large community-driven websites.  Drupal is highly
  configurable, skinnable, and secure.


pkgId: b5ab90ef9b3b684659df7058d2d97955a9a3d5b7513be5f6c213f530c1031787
name: dssi
arch: src
version: 1.1.1
epoch: 0
release: 28.fc40
summary: Disposable Soft Synth Interface
url: http://dssi.sourceforge.net/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dssi-1.1.1-28.fc40.src.rpm
checksum_type: sha256
description:
  Disposable Soft Synth Interface (DSSI, pronounced "dizzy") is a proposal for a
  plugin API for software instruments (soft synths) with user interfaces,
  permitting them to be hosted in-process by Linux audio applications. Think of
  it as LADSPA-for-instruments, or something comparable to a simpler version of
  VSTi.


pkgId: 8e7325ef1af50a30028556bc9ce4cef911cf3aacb3b51af5e70c2e271c2faffd
name: dssp
arch: src
version: 3.0.0
epoch: 0
release: 23.fc40
summary: Protein secondary structure assignment
url: http://swift.cmbi.ru.nl/gv/dssp/
rpm_license: BSL-1.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dssp-3.0.0-23.fc40.src.rpm
checksum_type: sha256
description:
  The DSSP program standardizes protein secondary structure assignment.
  DSSP is a database of secondary structure assignments (and much more)
  for all protein entries in the Protein Data Bank (PDB).  DSSP is also
  the program that calculates DSSP entries from PDB entries.  DSSP does
  not predict secondary structure.

  References:
  "A series of PDB related databases for everyday needs.", Robbie
  P. Joosten, Tim A.H. te Beek, Elmar Krieger, Maarten L. Hekkelman, Rob
  W.W. Hooft, Reinhard Schneider, Chris Sander, and Gert Vriend.
  Nucleic Acids Research 2011 January; 39(Database issue): D411-D419.
  doi: 10.1093/nar/gkq1105

  "Dictionary of protein secondary structure: pattern recognition of
  hydrogen-bonded and geometrical features.", Kabsch W, Sander C,
  Biopolymers. 1983 22 2577-2637.


pkgId: f9fb9c0c2dff7222418ba6100ca10e8c2af2c0514c74aec20e2bfd863053aeed
name: dt
arch: src
version: 21.27.git8d78d78
epoch: 0
release: 13.fc40
summary: Generic data test program
url: https://github.com/RobinTMiller/dt
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dt-21.27.git8d78d78-13.fc40.src.rpm
checksum_type: sha256
description:
  dt is a generic data test program used to verify proper operation of
  peripherals, file systems, device drivers, or any data stream supported by the
  operating system. In its' simplest mode of operation, dt writes and then
  verifies its' default data pattern, then displays performance statistics and
  other test parameters before exiting. Since verification of data is performed,
  dt can be thought of as a generic diagnostic tool.

  dt command lines are similar to the dd program, which is popular on most UNIX
  systems. It contains numerous options to give the user control of various test
  parameters.

  dt has been used to successfully test disks, tapes, serial lines, parallel
  lines, pipes, and memory mapped files. In fact, dt can be used for any device
  that allows the standard open, read, write, and close system calls. Special
  support is necessary for some devices, such as serial lines, for setting up the
  speed, parity, data bits, etc.

  Available documentation is located in /usr/share/doc/dt. Sample
  scripts and config data are installed in /usr/share/dt.


pkgId: 5ffa627c0fa4556839791b39b82932bb222c0439eff25812375f96f375421cd7
name: dtach
arch: src
version: 0.9
epoch: 0
release: 18.fc40
summary: A simple program that emulates the detach feature of screen
url: http://dtach.sourceforge.net
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dtach-0.9-18.fc40.src.rpm
checksum_type: sha256
description:
  dtach is a program that emulates the detach feature of screen, with
  less overhead.  It is designed to be transparent and un-intrusive; it
  avoids interpreting the input and output between attached terminals
  and the program under its control. Consequently, it works best with
  full-screen applications such as emacs.


pkgId: 5b7394bd3a7ddd4ce56d8efff620afde40ebba04b191ed93e3cfab76ec57e7aa
name: dtkwm
arch: src
version: 2.0.12
epoch: 0
release: 22.fc40
summary: Deepin graphical user interface library
url: https://github.com/linuxdeepin/dtkwm
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dtkwm-2.0.12-22.fc40.src.rpm
checksum_type: sha256
description:
  DtkWm is used to handle double screen for deepin desktop development.
  This package contains the shared libraries.


pkgId: 4026b538661864239a64e9b49840a54720d4b71e39a962037b37735a88daaab3
name: dualscreen-mouse-utils
arch: src
version: 0.5
epoch: 0
release: 30.fc40
summary: Utilities for use with dual head setups using independent screens
url: http://digamma.cs.unm.edu/trac.dmohr/wiki/DualscreenMouseUtils
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dualscreen-mouse-utils-0.5-30.fc40.src.rpm
checksum_type: sha256
description:
  Utilities for use with old-school dual head setups: namely not
  twinview / one big desktop, but rather two X screens.

  mouse-switchscreen:
    Change the mouse cursor from one screen to the other. Remembers the previous
    mouse position for each screen.

  mouse-wrapscreen:
    If you have an xorg.conf where both X screens are "separated" on the X
    coordinates, then the mouse cursor cannot cross. Which is sometimes desired,
    and sometimes not. Using mouse-wrapscreen you can configure them to be
    "uncrossable", and then run it in the background when you do want to be able
    to cross the cursor.


pkgId: 974eac076a2a942f59af5deee565cd15158e594bca4139cf2dedae2a70eef23d
name: dumb-init
arch: src
version: 1.2.5
epoch: 0
release: 11.fc40
summary: Entry-point for containers that proxies signals
url: https://github.com/Yelp/dumb-init
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dumb-init-1.2.5-11.fc40.src.rpm
checksum_type: sha256
description:
  dumb-init is a simple process supervisor and init system designed to run as
  PID 1 inside minimal container environments (such as Podman and Docker).

  * It can handle orphaned zombie processes.
  * It can pass signals properly for simple containers.


pkgId: 09517034accdd1553b20bb1a5f281df02eb171a595f320e375adb00f59983566
name: dummy-test-package-crested
arch: src
version: 0
epoch: 0
release: 3768.fc40
summary: Dummy Test Package called Crested
url: http://fedoraproject.org/wiki/DummyTestPackages
rpm_license: CC0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dummy-test-package-crested-0-3768.fc40.src.rpm
checksum_type: sha256
description:
  This is a dummy test package for the purposes of testing if the Fedora CI
  pipeline is working. There is nothing useful here.


pkgId: eb6d0a6caeab030827be3d047c63888e48faddfb13e67eb483c7638e2a2ee984
name: dumpasn1
arch: src
version: 20170309
epoch: 0
release: 16.fc40
summary: ASN.1 object dump utility
url: https://www.cs.auckland.ac.nz/~pgut001/
rpm_license: Copyright only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dumpasn1-20170309-16.fc40.src.rpm
checksum_type: sha256
description:
  dumpasn1 is an ASN.1 object dump program that will dump data encoded
  using any of the ASN.1 encoding rules in a variety of user-specified
  formats.


pkgId: 789be79ec6e5c62b01184a6dd87e87e37e99bca160f7bc263eadc7ab8487e004
name: duperemove
arch: src
version: 0.14.1
epoch: 0
release: 2.fc40
summary: Tools for deduping file systems
url: https://github.com/markfasheh/duperemove
rpm_license: GPL-2.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/duperemove-0.14.1-2.fc40.src.rpm
checksum_type: sha256
description:
  Duperemove is a simple tool for finding duplicated extents and
  submitting them for deduplication. When given a list of files it will
  hash their contents on a block by block basis and compare those hashes
  to each other, finding and categorizing extents that match each other.

  When given the -d option, duperemove will submit those extents for
  deduplication using the btrfs-extent-same ioctl.


pkgId: 7b94719c1e51579e9cf3aba1dd37be5f848fa343fe1e9d601b6f5bee71a215a5
name: dustin-domestic-manners-fonts
arch: src
version: 20030527
epoch: 0
release: 30.fc40
summary: Handwriting font by Dustin Norlander
url: http://www.dustismo.com
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dustin-domestic-manners-fonts-20030527-30.fc40.src.rpm
checksum_type: sha256
description:
  This font mimics the authors handwriting. The name comes from the book
  Domestic Manners of the Americans, by Fanny Trollope.

  Font contains, letters, numbers, punctuation, accented characters and
  some special characters (most European Latin characters).


pkgId: 0feb32edcefb0c1941af5f8e4720be41899f68726734030d6da066e527ab12b1
name: dustin-dustismo-fonts
arch: src
version: 20030318
epoch: 0
release: 31.fc40
summary: General purpose sans-serif font with bold, italic and bold-italic variations
url: http://www.dustismo.com
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dustin-dustismo-fonts-20030318-31.fc40.src.rpm
checksum_type: sha256
description:
  General purpose fonts by Dustin Norlander available in
  serif and sans-serif versions. The fonts cover all European Latin characters.


pkgId: dec7929056d21c7675e4f4cec9a14627583c9a099d0a416d95ad37f5b655883c
name: dvblast
arch: src
version: 3.4
epoch: 0
release: 13.fc40
summary: Simple and powerful streaming application
url: https://www.videolan.org/projects/dvblast.html
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dvblast-3.4-13.fc40.src.rpm
checksum_type: sha256
description:
  DVBlast is a simple and powerful streaming application based on the
  linux-dvb API. It opens a DVB device, tunes it, places PID filters,
  configures a CAM module, and demultiplexes the packets to several RTP
  outputs. It supports the new S2API of linux-dvb (compile option).


pkgId: 1c82314ebaee302ddcbc863479a341780ae88e4421c2b135757fe8f2e7d24845
name: dvd+rw-tools
arch: src
version: 7.1
epoch: 0
release: 41.fc40
summary: Toolchain to master DVD+RW/+R media
url: http://fy.chalmers.se/~appro/linux/DVD+RW/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dvd+rw-tools-7.1-41.fc40.src.rpm
checksum_type: sha256
description:
  Collection of tools to master DVD+RW/+R media. For further
  information see http://fy.chalmers.se/~appro/linux/DVD+RW/.


pkgId: 969246c8143b9e90530377919501ccf67d967c3be8cad4fa7012a238eeaf2849
name: dvdauthor
arch: src
version: 0.7.2
epoch: 0
release: 23.fc40
summary: Command line DVD authoring tool
url: http://dvdauthor.sourceforge.net/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dvdauthor-0.7.2-23.fc40.src.rpm
checksum_type: sha256
description:
  DVDAuthor is a set of tools to help you author the file and directory
  structure of a DVD-Video disc, including programmatic commands for
  implementing interactive behavior. It is driven by command lines and
  XML control files, though there are other programs that provide
  GUI-based front ends if you prefer.


pkgId: fd560fbfb2c147c5d3ba3eda175a261cebd0e9d0b93c97f85b91225653e829b4
name: dvdbackup
arch: src
version: 0.4.2
epoch: 0
release: 25.fc40
summary: Command line tool for ripping video DVDs
url: http://dvdbackup.sourceforge.net/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dvdbackup-0.4.2-25.fc40.src.rpm
checksum_type: sha256
description:
  dvdbackup is a tool to rip video DVDs from the command line. It has
  the advantages of being small, fast, and easy to use.


pkgId: 837f67e452827459abdeafa391c35ce496164db1bed712e3385c58706c4858a7
name: dvdisaster
arch: src
version: 0.79.5
epoch: 0
release: 19.fc40
summary: Additional error protection for CD/DVD media
url: http://dvdisaster.net
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dvdisaster-0.79.5-19.fc40.src.rpm
checksum_type: sha256
description:
  dvdisaster provides a margin of safety against data loss on CD and DVD media
  caused by scratches or aging. It creates error correction data,
  which is used to recover unreadable sectors if the disc becomes damaged
  at a later time.


pkgId: 72cd8751762caa90a10e1abf6e79545f668881d1fcd7532a4253c60a87c8f1e2
name: dvtm
arch: src
version: 0.15
epoch: 0
release: 19.fc40
summary: Tiling window management for the console
url: http://www.brain-dump.org/projects/dvtm/
rpm_license: MIT and ISC
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dvtm-0.15-19.fc40.src.rpm
checksum_type: sha256
description:
  dvtm brings the concept of tiling window management, popularized by
  X11-window managers like dwm to the console. As a console window
  manager it tries to make it easy to work with multiple console based
  programs like vim, mutt, cmus or irssi.


pkgId: b9a4761e294fdeea7f6e0bb8bb52a83f78151c2810eb8af84f1e3a425dff51f4
name: dwgrep
arch: src
version: 0.4
epoch: 0
release: 19.fc40
summary: A tool for querying Dwarf (debuginfo) graphs
url: http://pmachata.github.io/dwgrep/index.html
rpm_license: GPLv3+ and (GPLv2+ or LGPLv3+)
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dwgrep-0.4-19.fc40.src.rpm
checksum_type: sha256
description:
  Dwgrep is a tool, an associated language (called Zwerg) and a library
  (libzwerg) for querying Dwarf (debuginfo) graphs.

  You can think of dwgrep expressions as instructions describing a path
  through a graph, with assertions about the type of nodes along the
  way: that a node is of given type, that it has a given attribute,
  etc. There are also means of expressing sub-conditions,
  i.e. assertions that a given node is acceptable if a separate
  expression matches (or does not match) a different path through the
  graph.


pkgId: 2d1aed469423092bd06cf05dc13f9f3aef01cfc6c0b2b0c6be7c572a347f356a
name: dwlocstat
arch: src
version: 0.1
epoch: 0
release: 0.28.20121105gitc55cb50.fc40
summary: Tool for examining Dwarf location info coverage
url: https://github.com/pmachata/dwlocstat
rpm_license: GPLv3+ and LGPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dwlocstat-0.1-0.28.20121105gitc55cb50.fc40.src.rpm
checksum_type: sha256
description:
  dwlocstat is a tool for examining Dwarf location info coverage.  It
  goes through DIEs of given binary's debug info that represent
  variables and function parameters.  For each such DIE, it computes
  coverage of that DIE's range by location expressions.


pkgId: 7d810e99addd28ab27fe3133e0ace8ca202c72e3b166751e612bccae8eeae4a7
name: dwz
arch: src
version: 0.15
epoch: 0
release: 8
summary: DWARF optimization and duplicate removal tool
url: https://sourceware.org/dwz/
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dwz-0.15-8.src.rpm
checksum_type: sha256
description:
  The dwz package contains a program that attempts to optimize DWARF
  debugging information contained in ELF shared libraries and ELF executables
  for size, by replacing DWARF information representation with equivalent
  smaller representation where possible and by reducing the amount of
  duplication using techniques from DWARF standard appendix E - creating
  DW_TAG_partial_unit compilation units (CUs) for duplicated information
  and using DW_TAG_imported_unit to import it into each CU that needs it.

rpm_license:
  GPL-3.0-or-later AND (GPL-3.0-or-later WITH GCC-exception-3.1) AND GPL-2.0-or-later AND (GPL-2.0-or-later WITH GCC-exception-2.0) AND LGPL-2.0-or-later


pkgId: 4f0f5367aac5487c6d5bce7c0e30841e53e905aeaab670f5ada692edd1813154
name: dx
arch: src
version: 4.4.4
epoch: 0
release: 67.fc40
summary: Open source version of IBM's Visualization Data Explorer
url: http://www.opendx.org/
rpm_license: IPL-1.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dx-4.4.4-67.fc40.src.rpm
checksum_type: sha256
description:
  OpenDX is a uniquely powerful, full-featured software package for the
  visualization of scientific, engineering and analytical data: Its open
  system design is built on familiar standard interface environments. And its
  sophisticated data model provides users with great flexibility in creating
  visualizations.


pkgId: 843eb37a13e1e96c92a4530630489eabd49305610c5271052c335e653e6e4fef
name: dxcc
arch: src
version: 20080225
epoch: 0
release: 50.fc40
summary: Small utility which determines the ARRL DXCC entity of a ham radio callsign
url: http://fkurz.net/ham/dxcc.html
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dxcc-20080225-50.fc40.src.rpm
checksum_type: sha256
description:
  dxcc is a small utility which determines the ARRL DXCC entity of a ham radio
  callsign, based on the cty.dat country file by Jim Reisert, AD1C.

  Optional GUI with a world map showing the DXCC's location available.


pkgId: a7db48749cc5287f6a636ee74ab113a09ef2f4ab9460963f889f443c77f50372
name: dynaconf
arch: src
version: 3.1.2
epoch: 0
release: 12.fc40
summary: A dynamic configurator for python projects
url: https://github.com/rochacbruno/dynaconf
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dynaconf-3.1.2-12.fc40.src.rpm
checksum_type: sha256
description:
  Dynaconf is a layered configuration system for Python applications with strong
  support for 12-factor applications and extensions for Flask and Django


pkgId: 186493285235ebfc4faa0ff8bf9e0fb21b8d2501bc8b11a9b6622443ed691e57
name: dynamic-wallpaper-editor
arch: src
version: 2.7
epoch: 0
release: 7.fc40
summary: Utility for creation or edition GNOME desktop's XML wallpapers
url: https://github.com/maoschanz/dynamic-wallpaper-editor
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/dynamic-wallpaper-editor-2.7-7.fc40.src.rpm
checksum_type: sha256
description:
  The GNOME desktop allows the wallpaper to change with time.

  These dynamic wallpapers are XML files, and you don't want to write these files
  yourself: Dynamic Wallpaper Editor is a little utility for the creation or the
  edition of these XML wallpapers.


pkgId: cf97bcc22e0728ed84e7cb7d7d7c52e80480121a32d973eb31f1775b50640020
name: e16
arch: src
version: 1.0.29
epoch: 0
release: 3.fc40
summary: The Enlightenment window manager, DR16
url: http://www.enlightenment.org/
rpm_license: MIT with advertising and GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/e16-1.0.29-3.fc40.src.rpm
checksum_type: sha256
description:
  Enlightenment is a window manager for the X Window System that is
  designed to be powerful, extensible, configurable and pretty darned
  good looking! It is one of the more graphically intense window
  managers.

  Enlightenment goes beyond managing windows by providing a useful and
  appealing graphical shell from which to work. It is open in design and
  instead of dictating a policy, allows the user to define their own
  policy, down to every last detail.

  This package will install the Enlightenment window manager, development
  release 16.


pkgId: 936190e1bc7cc648801f2cf7acd4831696b100f8889adffe4ae77cf321fe7f08
name: e16-epplets
arch: src
version: 0.17
epoch: 0
release: 2.fc40
summary: Epplets for Enlightenment, DR16
url: http://www.enlightenment.org/
rpm_license: MIT with advertising and GPL+ and GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/e16-epplets-0.17-2.fc40.src.rpm
checksum_type: sha256
description:
  Epplets are small, handy Enlightenment applets, similar to dockapps or
  applets for other packages.  The epplets package contains the base
  epplet API library and header files, as well as the core set of
  epplets, including CPU monitors, clocks, a mail checker, mixers, a
  slideshow, a URL grabber, a panel-like toolbar, and more.


pkgId: 4eac793e5c7db24449c4a12d54d917d0384a83019ad8a04abcbffddcfad177da
name: e16-keyedit
arch: src
version: 0.10
epoch: 0
release: 1.fc40
summary: GUI for editing keybindings in Enlightenment, DR16
url: http://www.enlightenment.org/
rpm_license: MIT with advertising
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/e16-keyedit-0.10-1.fc40.src.rpm
checksum_type: sha256
description:
  The e16-keyedit package provides a graphical interface for managing
  keybindings in Enlightenment, DR16.


pkgId: 6b1c8538e2af20ace88520939a450c3c3f456831a1873f442d77917f09d50de6
name: e2tools
arch: src
version: 0.1.0
epoch: 0
release: 10.fc40
summary: Manipulate files in unmounted ext2/ext3 filesystems
url: https://e2tools.github.io/
rpm_license: GPL+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/e2tools-0.1.0-10.fc40.src.rpm
checksum_type: sha256
description:
  A simple set of utilities to read, write, and manipulate files in an
  ext2/ext3 filesystem directly using the ext2fs library. This works

    - without root access
    - without the filesystem being mounted
    - without kernel ext2/ext3 support

  The utilities are: e2cp e2ln e2ls e2mkdir e2mv e2rm e2tail


pkgId: a2b9db89fddf0a780b602fc832b79d9177b4f4fa1fe408f4ec7cef32ef888f70
name: e3
arch: src
version: 2.82
epoch: 0
release: 18.fc40
summary: Text editor with key bindings similar to WordStar, Emacs, pico, nedit, or vi
url: https://sites.google.com/site/e3editor/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/e3-2.82-18.fc40.src.rpm
checksum_type: sha256
description:
  e3 is a full-screen, user-friendly text editor with an key bindings similar to
  that of either WordStar, Emacs, pico, nedit, or vi.


pkgId: a4a26a10064cb35690b942ab8a314732ae6a8e8bcfff323f273ed76ee84c7162
name: easy-rsa
arch: src
version: 3.1.7
epoch: 0
release: 3.fc40
summary: Simple shell based CA utility
url: https://github.com/OpenVPN/easy-rsa
rpm_license: GPL-2.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/easy-rsa-3.1.7-3.fc40.src.rpm
checksum_type: sha256
description:
  This is a small RSA key management package, based on the openssl
  command line tool, that can be found in the easy-rsa subdirectory
  of the OpenVPN distribution. While this tool is primary concerned
  with key management for the SSL VPN application space, it can also
  be used for building web certificates.


pkgId: 1a372602c40461f49cc00b43e2a8649ca7723d79d65ee8408108c3fde41e78f8
name: easytag
arch: src
version: 2.4.3
epoch: 0
release: 21.fc40
summary: Tag editor for MP3, Ogg, FLAC and other music files
url: https://wiki.gnome.org/Apps/EasyTAG
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/easytag-2.4.3-21.fc40.src.rpm
checksum_type: sha256
description:
  EasyTAG is a utility for viewing, editing and writing the tags of MP4, MP3,
  MP2, FLAC, Ogg Opus, Ogg Speex, Ogg Vorbis, MusePack and Monkey's Audio files.


pkgId: 88790981b7b0410a955a1b747e673347f7707d09269d12ec47d302a6acd8770f
name: eb
arch: src
version: 4.4.3
epoch: 0
release: 22.fc40
summary: Library for accessing Japanese CD-ROM electronic books
url: http://www.sra.co.jp/people/m-kasahr/eb/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/eb-4.4.3-22.fc40.src.rpm
checksum_type: sha256
description:
  EB Library is a C library for accessing CD-ROM books.
  EB Library supports to access CD-ROM books of
  EB, EBG, EBXA, EBXA-C, S-EBXA and EPWING formats.


pkgId: 9e61f6f963ae6b74807218275ec69bd184f9a61ff9c6387372f0eb860676ee7a
name: ebnetd
arch: src
version: 1.0
epoch: 0
release: 47.fc40
summary: EBNET protocol server
url: http://www.sra.co.jp/people/m-kasahr/ebnetd/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ebnetd-1.0-47.fc40.src.rpm
checksum_type: sha256
description:
  EBNET is a protocol to communicate to the EB library that is a C library
  for accessing "CD-ROM books".

  This package contains a EBNET protocol server.


pkgId: 58743a76ab3aadc798c621139f59de9685620e4b9b3c19dd5514bd8d4c3f7db3
name: ebtables
arch: src
version: 2.0.11
epoch: 0
release: 16.fc40
summary: Ethernet Bridge frame table administration tool
url: http://ebtables.sourceforge.net/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ebtables-2.0.11-16.fc40.src.rpm
checksum_type: sha256
description:
  Ethernet bridge tables is a firewalling tool to transparently filter network
  traffic passing a bridge. The filtering possibilities are limited to link
  layer filtering and some basic filtering on higher network layers.

  This tool is the userspace control for the bridge and ebtables kernel
  components (built by default in Fedora kernels).

  The ebtables tool can be used together with the other Linux filtering tools,
  like iptables. There are no known incompatibility issues.


pkgId: c2b4dc57a27c83ac59543163a28ab620c4631a1d1ee8bd905aa618ad133ddc7d
name: ebtree
arch: src
version: 6.0.8
epoch: 0
release: 21.fc40
summary: Elastic binary tree library
url: http://1wt.eu/articles/ebtree/
rpm_license: LGPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ebtree-6.0.8-21.fc40.src.rpm
checksum_type: sha256
description:
  ebtree is a binary search tree specially optimized to very
  frequently store, retrieve and delete discrete integer or binary
  data without having to deal with memory allocation.


pkgId: 55ed933acf99389e373da669cea2e2d16a4bc241c5b635ed2286f58a8d43c39e
name: ebumeter
arch: src
version: 0.4.2
epoch: 0
release: 13.fc40
summary: Loudness measurement according to EBU-R128
url: http://kokkinizita.linuxaudio.org/linuxaudio
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ebumeter-0.4.2-13.fc40.src.rpm
checksum_type: sha256
description:
  Loudness measurement according to EBU-R128. Presented at LAC 2011
  (thanks to Joern Nettingsmeier!). The only documentation available
  at the moment are the paper, the presentation, slides and the video
  of the LAC 2011 session.


pkgId: 73a80f3059fd5239ba13e58b08971914c4aaf69e9c8fb3c1a85760d06b336750
name: ec2-metadata
arch: src
version: 0.1.1
epoch: 0
release: 20.fc40
summary: EC2 instance metadata query tool
url: http://aws.amazon.com/code/1825
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ec2-metadata-0.1.1-20.fc40.src.rpm
checksum_type: sha256
description:
  A simple bash script that uses curl to query the EC2 instance metadata from
  within an instance running in Amazon EC2 or another cloud provider with a
  compatible metadata service.


pkgId: 8a302f985e0e6d4403de9c61138fe634dc3ef1f62c5aa021adad1041af7ab281
name: ecl
arch: src
version: 23.9.9
epoch: 0
release: 3.fc40
summary: Embeddable Common-Lisp
url: https://common-lisp.net/project/ecl/
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ecl-23.9.9-3.fc40.src.rpm
checksum_type: sha256
description:
  ECL (Embeddable Common Lisp) is an implementation of the Common Lisp
  language as defined by the ANSI X3J13 specification.  ECL features a
  bytecode compiler and interpreter, the ability to build standalone
  executables and libraries, and extensions such as ASDF, sockets, and
  Gray streams.

rpm_license:
  LGPL-2.0-or-later AND BSD-2-Clause AND MIT AND X11 AND HPND AND LOOP AND LicenseRef-Fedora-Public-Domain


pkgId: 2fff1ebf6cb69d7cd138e2e4c4ec60a651261aba196657c01bddfe5656c92c88
name: ecryptfs-utils
arch: src
version: 111
epoch: 0
release: 35.fc40
summary: The eCryptfs mount helper and support libraries
url: https://launchpad.net/ecryptfs
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ecryptfs-utils-111-35.fc40.src.rpm
checksum_type: sha256
description:
  eCryptfs is a stacked cryptographic filesystem that ships in Linux
  kernel versions 2.6.19 and above. This package provides the mount
  helper and supporting libraries to perform key management and mount
  functions.

  Install ecryptfs-utils if you would like to mount eCryptfs.


pkgId: 7d0ccc41761d29f9c177b7038334aa6614ef6842597240387478884013ea4c33
name: edg-mkgridmap
arch: src
version: 4.0.4
epoch: 0
release: 18.fc40
summary: A tool to build the grid map-file from VO servers
url: http://svnweb.cern.ch/world/wsvn/curios/edg-mkgridmap
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/edg-mkgridmap-4.0.4-18.fc40.src.rpm
checksum_type: sha256
description:
  edg-mkgridmap is a tool to build the grid map-file from VO servers,
  taking into account both VO and local policies.


pkgId: 53d11f1be4bfaa562326dc31521850564855ee68dcd73f2c84523daeefce6435
name: editline
arch: src
version: 1.17.1
epoch: 0
release: 10.fc40
summary: A small compatible replacement for readline
url: https://troglobit.com/projects/editline/
rpm_license: Spencer-94
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/editline-1.17.1-10.fc40.src.rpm
checksum_type: sha256
description:
  This is a line editing library for UNIX. It can be linked into almost
  any program to provide command line editing and history. It is call
  compatible with the FSF readline library, but is a fraction of the
  size (and offers fewer features).


pkgId: 9cf4162ed24f01eb80d9698889497a867f0a35771a2ce0f3d24c2617b23485cf
name: editorconfig-emacs
arch: src
version: 0.10.1
epoch: 0
release: 1.fc40
summary: EditorConfig plugin for emacs
url: https://github.com/editorconfig/editorconfig-emacs
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/editorconfig-emacs-0.10.1-1.fc40.src.rpm
checksum_type: sha256
description:
  This is the EditorConfig plugin for emacs.  With this plugin
  installed, emacs will automatically respect coding style settings
  found in an .editorconfig file.


pkgId: 14896cb1fe748d529a15e467af9d7ec5f8fef4b3b55d9ee5967a4c5ca83657d5
name: editres
arch: src
version: 1.0.8
epoch: 0
release: 4.fc40
summary: X11 utility to view and edit application resources
url: https://www.x.org
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/editres-1.0.8-4.fc40.src.rpm
checksum_type: sha256
description:
  editres is a tool that allows users and application developers to view
  the full widget hierarchy of any Xt Toolkit application that speaks the
  Editres protocol  In addition, editres will help the user construct
  resource specifications, allow the user to apply the resource to
  the application and view the results dynamically.


pkgId: ee78d88f227de06ce7abb1344520209c11853e8ccba36208c3a9b46c0ca7356a
name: eegdev
arch: src
version: 0.2
epoch: 0
release: 28.fc40
summary: Library to acquire data from various EEG recording devices
url: http://cnbi.epfl.ch/software/eegdev.html
rpm_license: LGPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/eegdev-0.2-28.fc40.src.rpm
checksum_type: sha256
description:
  eegdev is a library that provides a unified interface for accessing various EEG
  (and other biosignals) acquisition systems. This interface has been designed to
  be both flexible and efficient. The device specific part is implemented by the
  mean of plugins which makes adding new device backend fairly easy even if the
  library does not support them yet officially.

  The core library not only provides to users a unified and consistent interfaces
  to the acquisition device but it also provides many functionalities to the
  device backends (plugins) ranging from configuration to data casting and scaling
  making writing new device backend an easy task.


pkgId: aeebc6fe215c7af6c26833ed4aa9673fdd357fe997c93de015ccecca9d72eaf8
name: efax
arch: src
version: 0.9a
epoch: 0
release: 43.001114.fc40
summary: A program for faxing using a Class 1, 2 or 2.0 fax modem
url: http://www.cce.com/efax/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/efax-0.9a-43.001114.fc40.src.rpm
checksum_type: sha256
description:
  Efax is a small ANSI C/POSIX program that sends and receives faxes
  using any Class 1, 2 or 2.0 fax modem.

  You need to install efax if you want to send faxes and you have a
  Class 1, 2 or 2.0 fax modem.


pkgId: aabd6b7d5d212b0ca31901822b3e8a1dacf6d5af3aeb012fd4bf5be722fb2e2f
name: efifs
arch: src
version: 1.11
epoch: 0
release: 1
summary: Free software EFI/UEFI standalone file system drivers
url: https://efi.akeo.ie/
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/efifs-1.11-1.src.rpm
checksum_type: sha256
description:
  Free software EFI/UEFI standalone file system drivers, based on the GRUB
  2.0 read-only drivers: AFFS (Amiga Fast FileSystem), BFS (BeOS FileSystem),
  btrfs, exFAT, ext2/ext3/ext4, EROFS, F2FS, HFS and HFS+ (Mac OS, including
  compression support), ISO9660, JFS (Journaled FileSystem), nilfs2, NTFS
  (including compression support), ReiserFS, SFS (Amiga Smart FileSystem),
  UDF, UFS/FFS, UFS2/FFS2, XFS, ZFS and more.


pkgId: 1f1eb4d9964a54015fdd70697baed968bdbbc8370a250b081ad6f74f1717fb84
name: efifs
arch: src
version: 1.9
epoch: 0
release: 5.fc40
summary: Free software EFI/UEFI standalone file system drivers
url: https://efi.akeo.ie/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/efifs-1.9-5.fc40.src.rpm
checksum_type: sha256
description:
  Free software EFI/UEFI standalone file system drivers, based on the GRUB 2.0
  read-only drivers: AFFS (Amiga Fast FileSystem), BFS (BeOS FileSystem), btrfs,
  exFAT, ext2/ext3/ext4, F2FS (experimental), HFS and HFS+ (Mac OS, including
  the compression support), ISO9660, JFS (Journaled FileSystem), nilfs2, NTFS
  (including compression support), ReiserFS, SFS (Amiga Smart FileSystem), UDF,
  UFS/FFS, UFS2/FFS2, XFS, ZFS and more.


pkgId: 3a8e09a44755ca56947afc55192cbf815b5b2de1a3e06b1dc074569c2c1c30b4
name: egd
arch: src
version: 0.9
epoch: 0
release: 30.fc40
summary: Entropy Gathering Daemon
url: http://egd.sourceforge.net/
rpm_license: GPL+ or MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/egd-0.9-30.fc40.src.rpm
checksum_type: sha256
description:
  EGD is an Entropy Gathering Daemon meant to be used on systems that can run GPG
  but which don't have a convenient (or reliable) source of random bits. It is a
  regular user-space program that sits around, running programs like 'w' and
  'last' and 'vmstat', collecting the randomness (or at least the
  unpredictability) inherent in the output of these system statistics programs
  when used on a reasonably busy system. It slowly stirs the output of these
  gathering programs into a pool of entropy, much like the linux kernel device,
  and allows other programs to read out random bits from this pool.


pkgId: 306bd9b53ba3ed948ae0fee8103c41672d8ff520332446b4615fe3f085c714cb
name: egl-wayland
arch: src
version: 1.1.17
epoch: 0
release: 6
summary: EGLStream-based Wayland external platform
url: https://github.com/NVIDIA/egl-wayland
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/egl-wayland-1.1.17-6.src.rpm
checksum_type: sha256
description:
  EGL External Platform library to add client-side Wayland support to EGL on top
  of EGLDevice and EGLStream families of extensions.

  This library implements an EGL External Platform interface to work along with
  EGL drivers that support the external platform mechanism.


pkgId: a42c0e6d249377d5f3ff865f7c1b0db105749aeb3b7e4cf9c3ab9febddff501f
name: ektype-mukta-fonts
arch: src
version: 2.538
epoch: 0
release: 15.fc40
summary: Free Indian truetype/open type fonts
url: https://github.com/EkType/Mukta
rpm_license: OFL
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ektype-mukta-fonts-2.538-15.fc40.src.rpm
checksum_type: sha256
description:
  Mukta is a typeface available in
  seven weights, supporting Devanagari, Gujarati, Tamil and Latin scripts.


pkgId: 6cf3fd67250f0908086dafd0e264bb7bf5949ff5bcaaa5f9f19382282ba9b7fb
name: electronics-menu
arch: src
version: 1.0
epoch: 0
release: 32.fc40
summary: Electronics Menu for the Desktop
url: http://geda.seul.org/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/electronics-menu-1.0-32.fc40.src.rpm
checksum_type: sha256
description:
  The programs from the category Electronics are normally located
  in the Edutainment directory.
  This Package adds a Electronics menu to the xdg menu structure.

  electronics-menu is listed among Fedora Electronic Lab (FEL) packages.


pkgId: d6c286003bb6486035ed8aad04dd2bbdab8e81f4b2a6a46183604e861b4ba866
name: elementary-calculator
arch: src
version: 2.0.2
epoch: 0
release: 3.fc40
summary: Calculator app designed for elementary
url: https://github.com/elementary/calculator
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/elementary-calculator-2.0.2-3.fc40.src.rpm
checksum_type: sha256
description:
  A simple calculator for everyday use.

  It supports basic and some scientific calculations, including trigonometry
  functions (sin, cos, and tan).


pkgId: f7f37ce2b57fffbc410a3aaa1b195e59baedfd4bdd5da0329a9236680e48f0c8
name: elementary-calendar
arch: src
version: 7.0.0
epoch: 0
release: 4.fc40
summary: Desktop calendar app designed for elementary
url: https://github.com/elementary/calendar
rpm_license: GPL-3.0-or-later AND GPL-2.0-or-later AND LGPL-2.1-or-later AND LGPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/elementary-calendar-7.0.0-4.fc40.src.rpm
checksum_type: sha256
description:
  A slim, lightweight calendar app that syncs and manages multiple
  calendars in one place, like Google Calendar, Outlook and CalDAV.


pkgId: 1098eaf0771a90f93833a8100b475793282e708e29dda58c4723d421947d999d
name: elementary-files
arch: src
version: 6.5.3
epoch: 0
release: 3.fc40
summary: File manager from elementary
description: The simple, powerful, and sexy file manager from elementary.
url: https://github.com/elementary/files
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/elementary-files-6.5.3-3.fc40.src.rpm
checksum_type: sha256
rpm_license:
  GPL-3.0-or-later AND GPL-3.0-only AND GPL-2.0-or-later AND LGPL-3.0-or-later AND LGPL-3.0-only AND LGPL-2.1-or-later


pkgId: a767cac839ceb587d55cb3f77c88011872d442efcbb0e52add593a0a7dc73a93
name: elementary-music
arch: src
version: 7.1.0
epoch: 0
release: 3.fc40
summary: Music player and library designed for elementary
url: https://github.com/elementary/music
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/elementary-music-7.1.0-3.fc40.src.rpm
checksum_type: sha256
description:
  Quickly queue up and listen to your local music files without any extra
  frills. See embedded album artwork. Control playback with media keys or
  in the system audio indicator.


pkgId: bf08dbe72549160e7abaa177fea6a4a6df8105d22fc7197ec5c3c1663749af20
name: elementary-xfce-icon-theme
arch: src
version: 0.19
epoch: 0
release: 1.fc40
summary: Icons for Xfce based on the elementary Project Icon Theme
url: https://github.com/shimmerproject/elementary-xfce
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/elementary-xfce-icon-theme-0.19-1.fc40.src.rpm
checksum_type: sha256
description:
  This is an icon-theme maintained with Xfce in mind,
  but it supports other desktops like Gnome3 as well.
  It's a fork of the upstream elementary-project,
  which took place because the team decided to
  drop a lot of desktop-specific symlinks.
  This icon-theme is supposed to keep everything
  working, but we'll still pull new icons from upstream
  and integrate them occasionally.


pkgId: fa472f9d9482b6c0d913d43c32300f829558d5964cbb50b18fbd63fa85fc1adc
name: elinks
arch: src
version: 0.17.0
epoch: 0
release: 4.fc40
summary: A text-mode Web browser
url: https://github.com/rkd77/elinks
rpm_license: GPL-2.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/elinks-0.17.0-4.fc40.src.rpm
checksum_type: sha256
description:
  Elinks is a text-based Web browser. Elinks does not display any images,
  but it does support frames, tables and most other HTML tags. Elinks'
  advantage over graphical browsers is its speed--Elinks starts and exits
  quickly and swiftly displays Web pages.


pkgId: d4fff8a3e4157f35b92987f68350ee27af13588c48ae9555a9589d35e9e52b70
name: ell
arch: src
version: 0
epoch: 0
release: 0.25.20130617svn.fc40
summary: Header-only C++ library to write EBNF grammars
url: http://code.google.com/p/ell/
rpm_license: LGPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ell-0-0.25.20130617svn.fc40.src.rpm
checksum_type: sha256
description:
  Embedded LL library is pure-header library to write EBNF grammars as C++ code.
  It eases the development of parser or similar applications, while removing the
  need to write a lexer.


pkgId: baaaded728abc96af1ef0b4f5e0f5ea54793df6a7123fe9420d61c39fec0e99b
name: elph
arch: src
version: 1.0.1
epoch: 0
release: 33.fc40
summary: Tool to find motifs in a set of DNA or protein sequences
url: http://www.cbcb.umd.edu/software/ELPH/
rpm_license: Artistic clarified
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/elph-1.0.1-33.fc40.src.rpm
checksum_type: sha256
description:
  ELPH is a general-purpose Gibbs sampler for finding motifs in a set of
  DNA or protein sequences. The program takes as input a set containing
  anywhere from a few dozen to thousands of sequences, and searches
  through them for the most common motif, assuming that each sequence
  contains one copy of the motif.


pkgId: 1d90046b227b0518a0a368c0ef72bc09195ea76450d6908294896b02b40579c5
name: emacs-auctex
arch: src
version: 13.3
epoch: 0
release: 3.fc40
summary: Enhanced TeX modes for Emacs
url: https://www.gnu.org/software/auctex/
rpm_license: GPL-3.0-or-later AND FSFAP AND GFDL-1.3-no-invariants-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-auctex-13.3-3.fc40.src.rpm
checksum_type: sha256
description:
  AUCTeX is an extensible package that supports writing and formatting
  TeX files for most variants of Emacs.

  AUCTeX supports many different TeX macro packages, including AMS-TeX,
  LaTeX, Texinfo and basic support for ConTeXt.  Documentation can be
  found under /usr/share/doc, e.g. the reference card (tex-ref.pdf) and
  the FAQ. The AUCTeX manual is available in Emacs info (C-h i d m
  AUCTeX RET). On the AUCTeX home page, we provide manuals in various
  formats.

  AUCTeX includes preview-latex support which makes LaTeX a tightly
  integrated component of your editing workflow by visualizing selected
  source chunks (such as single formulas or graphics) directly as images
  in the source buffer.

  This package is for GNU Emacs.


pkgId: f89579438aecc583f7b0087ffef2c500a13cedd3fb406e5fa022a741bf6d28dd
name: emacs-auto-complete
arch: src
version: 1.5.1
epoch: 0
release: 10.fc40
summary: Emacs auto-complete package
url: https://github.com/auto-complete/auto-complete/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-auto-complete-1.5.1-10.fc40.src.rpm
checksum_type: sha256
description:
  Auto-Complete is an intelligent auto-completion extension for Emacs. It extends
  the standard Emacs completion interface and provides an environment that allows
  users to concentrate more on their own work.


pkgId: c425ca5fe8e0f0552e2d0446bfaeba4e950b345b9cdc1e3029a0fbea819e333b
name: emacs-blacken
arch: src
version: 0
epoch: 0
release: 0.13.20210406git880cf50.fc40
summary: Python Black for Emacs
url: https://github.com/pythonic-emacs/blacken
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-blacken-0-0.13.20210406git880cf50.fc40.src.rpm
checksum_type: sha256
description:
  Blacken uses black to format a Python buffer. It can be called explicitly on a
  certain buffer, but more conveniently, a minor-mode 'blacken-mode' is provided
  that turns on automatically running black on a buffer before saving.

  To automatically format all Python buffers before saving, add the function
  blacken-mode to python-mode-hook:

    (add-hook 'python-mode-hook 'blacken-mode)


pkgId: 87b5462ea35bb3da8384f0159590d27aad9a530226512f92aface017baa900bc
name: emacs-color-theme
arch: src
version: 6.6.0
epoch: 0
release: 27.fc40
summary: Color themes for Emacs
url: http://www.nongnu.org/color-theme
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-color-theme-6.6.0-27.fc40.src.rpm
checksum_type: sha256
description:
  Emacs Color Themes is an add-on package for GNU Emacs.
  It provides a lot of different color themes to skin your Emacs greatly
  improving the editing experience. It also includes a neat framework to
  help you creating new themes from your current emacs customization's.
  Also features an easy way to share your custom themes with the world.


pkgId: 6313ede68391aca1ad2263e5d13489e66fcf3ea290c22af95290f2579ee24097
name: emacs-common-proofgeneral
arch: src
version: 4.5
epoch: 0
release: 7.fc40
summary: Emacs mode for standard interaction interface for proof assistants
url: https://proofgeneral.github.io/
rpm_license: GPL-3.0-or-later AND CC-BY-SA-3.0 AND CC-BY-SA-2.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-common-proofgeneral-4.5-7.fc40.src.rpm
checksum_type: sha256
description:
  Proof General is a generic front-end for proof assistants (also known
  as interactive theorem provers) based on Emacs.

  Proof General allows one to edit and submit a proof script to a proof
  assistant in an interactive manner:
  - It tracks the goal state, and the script as it is submitted, and
    allows for easy backtracking and block execution.
  - It adds toolbars and menus to Emacs for easy access to proof
    assistant features.
  - It integrates with Emacs Unicode support for some provers to provide
    output using proper mathematical symbols.
  - It includes utilities for generating Emacs tags for proof scripts,
    allowing for easy navigation.

  Proof General supports a number of different proof assistants
  (Isabelle, Coq, PhoX, and LEGO to name a few) and is designed to be
  easily extendable to work with others.


pkgId: d3dc6baafac760b533ab0f7f92394461f162a906d73332e86b8d221e1155ee4f
name: emacs-ctable
arch: src
version: 0.1.2
epoch: 0
release: 10.fc40
summary: Table Component for Emacs Lisp
url: https://github.com/kiwanami/emacs-ctable/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-ctable-0.1.2-10.fc40.src.rpm
checksum_type: sha256
description:
  ctable.el is a table component for Emacs Lisp. Emacs lisp programs can display a
  nice table view from an abstract data model. The many emacs programs have the
  code for displaying table views, such as dired, list-process, buffer-list and so
  on. So, ctable.el would provide functions and a table framework for the table
  views.


pkgId: eec0fda64737d6cc9813d54222555c2472161c2c846cf856306ab5a3f2f242ae
name: emacs-deferred
arch: src
version: 0.5.1
epoch: 0
release: 9.fc40
summary: Simple asynchronous functions for Emacs Lisp
url: https://github.com/kiwanami/emacs-deferred/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-deferred-0.5.1-9.fc40.src.rpm
checksum_type: sha256
description:
  deferred.el provides facilities to manage asynchronous tasks.

  concurrent.el is a higher level library for asynchronous tasks, based on
  deferred.el.
  It is inspired by libraries of other environments and concurrent programming
  models. It has following facilities: pseud-thread, generator, semaphore,
  dataflow variables and event management.


pkgId: 91b8b9501cd8f414a54e95727135d3de8c159ca0e56b8b7d4d2846f66b6e5dd8
name: emacs-dockerfile-mode
arch: src
version: 1.9
epoch: 0
release: 1.fc40
summary: An emacs mode for handling Dockerfiles
url: https://github.com/spotify/dockerfile-mode
rpm_license: Apache-2.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-dockerfile-mode-1.9-1.fc40.src.rpm
checksum_type: sha256
description:
  This package provides a major mode `dockerfile-mode' for use with the standard
  `Dockerfile' file format.  Additional convenience functions allow images to be
  built easily.


pkgId: 7432275d23c9d0f2a8f74ca0237d5376cd3fce8dfd454e8eefb5c628d70c212f
name: emacs-epc
arch: src
version: 0.1.1
epoch: 0
release: 10.fc40
summary: A RPC stack for Emacs Lisp
url: https://github.com/kiwanami/emacs-epc/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-epc-0.1.1-10.fc40.src.rpm
checksum_type: sha256
description:
  This program is an asynchronous RPC stack for Emacs. Using this RPC stack, the
  Emacs can communicate with the peer process smoothly. Because the protocol
  employs S-expression encoding and consists of asynchronous communications, the
  RPC response is fairly good.


pkgId: 0568cfdefd2ff484d0bc9da6e2a16d0a8343ad67e798070a2322baa0ebaa4a24
name: emacs-flycheck
arch: src
version: 34.1
epoch: 0
release: 1.fc40
summary: On the fly syntax checking for GNU Emacs
url: https://www.flycheck.org/
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-flycheck-34.1-1.fc40.src.rpm
checksum_type: sha256
description:
  Flycheck is a modern on-the-fly syntax checking extension for GNU Emacs,
  intended as replacement for the older Flymake extension which is part of GNU
  Emacs.


pkgId: 27a31bcbee3b09fd8a22808f39b88efd206f87684bc2159e978a5a22f024aa05
name: emacs-htmlize
arch: src
version: 1.34
epoch: 0
release: 28.fc40
summary: Convert buffer text and decorations to HTML
url: http://www.emacswiki.org/emacs-en/Htmlize
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-htmlize-1.34-28.fc40.src.rpm
checksum_type: sha256
description:
  HTMLize is an add-on package for GNU Emacs. It converts the buffer text and
  the associated decorations to HTML. The conversion is quite sophisticated, it
  understands non-ascii characters, looks up colours in the X11 RGB database,
  and can generate either CSS or old style font bits.


pkgId: 34646c8f42bf6c8bae6edad8889fe0c99757c524ab62932fdf78c097c3ead2d1
name: emacs-iedit
arch: src
version: 0.9.9.9.9
epoch: 0
release: 6.fc40
summary: Edit multiple regions simultaneously in Emacs
url: https://www.emacswiki.org/emacs/Iedit
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-iedit-0.9.9.9.9-6.fc40.src.rpm
checksum_type: sha256
description:
  This package includes Emacs minor modes (iedit-mode and
  iedit-rectangle-mode) based on an API library (iedit-lib) and allows you
  to alter one occurrence of some text in a buffer (possibly narrowed) or
  region, and simultaneously have other occurrences changed in the same
  way, with visual feedback as you type.

  iedit-mode is a great alternative to built-in replace commands:

  - A more intuitive way to alter all the occurrences at once
  - Visual feedback
  - Fewer keystrokes in most cases
  - Optionally preserve case


pkgId: b105c3d91b8dc50c122ecbbd473a6a2e96cd62105b105dbc86db998b4d3f5f7d
name: emacs-irsim-mode
arch: src
version: 0.1
epoch: 0
release: 30.fc40
summary: Irsim mode for emacs
url: http://code.google.com/p/irsim-mode/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-irsim-mode-0.1-30.fc40.src.rpm
checksum_type: sha256
description:
  IRSIM is a switch-level simulator for digital logic circuits.
  This is an Emacs mode for editing IRSIM netlists. It provides
  syntax highlighting and an extremely pleasant method if indentation.


pkgId: 9887c75c95820ce862acdd56bef00fbbf27625e943158cd0b584294d9ae2c77b
name: emacs-json-mode
arch: src
version: 1.9.0
epoch: 0
release: 1.fc40
summary: Major mode for editing JSON files with Emacs
url: https://github.com/joshwnj/json-mode
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-json-mode-1.9.0-1.fc40.src.rpm
checksum_type: sha256
description:
  Major mode for editing JSON files.

  Extends the builtin js-mode to add better syntax highlighting for JSON.


pkgId: d0fbe46aebaf97e2daa915741e68c41af72be795e4f6c6a67751319010d51c3f
name: emacs-json-snatcher
arch: src
version: 1.0.0
epoch: 0
release: 14.fc40
summary: Get the path to a JSON element in Emacs
url: https://github.com/Sterlingg/json-snatcher
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-json-snatcher-1.0.0-14.fc40.src.rpm
checksum_type: sha256
description:
  Say you're looking through a large JSON file, and see a value that you want to
  extract programmatically. This Emacs extension will allow you to snatch the path
  to this value.


pkgId: e9ef9a30d5b0ec5f025d962120866d5264a1af2f406119c528928ff26d89e5ff
name: emacs-logstash-conf
arch: src
version: 0.4
epoch: 0
release: 7.fc40
summary: Emacs mode for editing Logstash configuration files
url: https://github.com/Wilfred/logstash-conf.el/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-logstash-conf-0.4-7.fc40.src.rpm
checksum_type: sha256
description:
  A basic Emacs mode for editing Logstash configuration files.

  Features:
    * Syntax highlighting
    * Indentation


pkgId: a965a11f9c5afe5660e7ef43acfa81830eb94ce1a26d9730b5edafe73413fb2f
name: emacs-popup
arch: src
version: 0.5.9
epoch: 0
release: 5.fc40
summary: Visual Popup Interface Library for Emacs
url: https://github.com/auto-complete/popup-el/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-popup-0.5.9-5.fc40.src.rpm
checksum_type: sha256
description:
  Emacs.popup.el is a visual popup user interface library for Emacs. This provides
  a basic API and common UI widgets such as popup tooltips and popup menus.


pkgId: d3df06f5ca0466cfcc9b8ee4885d5f0ee5fa32f754576220bbba0ade25f62f7b
name: emacs-python-environment
arch: src
version: 0.0.2
epoch: 0
release: 9.fc40
summary: Python virtualenv API for Emacs Lisp
url: https://github.com/tkf/emacs-python-environment/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-python-environment-0.0.2-9.fc40.src.rpm
checksum_type: sha256
description:
  Emacs integrates well with external tools written in languages other than Emacs
  Lisp and thus use of these tools should be encouraged. However, many people try
  to avoid using non-Emacs Lisp software tools since it makes installation of
  their Emacs plugin hard. python-environment.el solves this problem (only for the
  case the tool is written in Python) by providing virtualenv API in Emacs Lisp so
  that you can automate installation of tools written in Python.


pkgId: 6f61d8d428b59cb4abe68be47d7f4e8e32e0099914616089b4403b3904504655
name: emacs-rinari
arch: src
version: 2.1
epoch: 0
release: 29.20100815git.fc40
summary: Ruby on rails minor mode for Emacs
url: http://rinari.rubyforge.org/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-rinari-2.1-29.20100815git.fc40.src.rpm
checksum_type: sha256
description:
  Rinari is a set of Emacs Lisp functions aimed towards
  making Emacs into a top-notch Ruby on rails development environment.


pkgId: edbcdb87d3592f0d35987973fce9c5b4fe58a5344007a4358606f4a0bf9a725b
name: emacs-terraform-mode
arch: src
version: 1.0.1
epoch: 0
release: 3.fc40
summary: Major mode of Terraform configuration file
url: https://github.com/syohex/emacs-terraform-mode
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacs-terraform-mode-1.0.1-3.fc40.src.rpm
checksum_type: sha256
description:
  Major mode of terraform configuration file. terraform-mode provides syntax
  highlighting, indentation function and formatting.

  Format the current buffer with terraform-format-buffer. To always format
  terraform buffers when saving, use:

      (add-hook 'terraform-mode-hook 'terraform-format-on-save-mode)


pkgId: 365e9b95e24973dd1663147f6132e1db66081302e63a9f0cf7c2efebc578e444
name: emacspeak
arch: src
version: 59.0
epoch: 0
release: 2.fc40
summary: Emacs Speech interface
url: http://emacspeak.sourceforge.net/
rpm_license: GPLv2+ and BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emacspeak-59.0-2.fc40.src.rpm
checksum_type: sha256
description:
  Emacspeak is a speech interface that allows visually impaired users to
  interact independently and efficiently with the computer. Emacspeak has
  dramatically changed how the author and hundreds of blind and visually
  impaired users around the world interact with the personal computer and
  the Internet. A rich suite of task-oriented speech-enabled tools provides
  efficient speech-enabled access to the evolving semantic WWW.
  When combined with Linux running on low-cost PC hardware,
  Emacspeak/Linux provides a reliable, stable speech-friendly solution that
  opens up the Internet to visually impaired users around the world.


pkgId: 21e8928e28c34c911626df1d3d3cc3bb1b5d3804635afe4c7281aa995a4ca43a
name: emu8051
arch: src
version: 0~20220911git5dc68127
epoch: 0
release: 1.fc40
summary: 8051/8052 emulator with curses-based UI
url: https://solhsa.com/8051.html
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/emu8051-0~20220911git5dc68127-1.fc40.src.rpm
checksum_type: sha256
description:
  This is a simulator of the 8051/8052 microcontrollers. For sake of simplicity,
  I'm only referring to 8051, although the emulator can emulate either one. For
  more information about the 8-bit chip(s), please check out 8052mcu.com or
  look up the data sheets. Intel, being the originator of the architecture,
  naturally has information as well.

  The 8051 is a pretty easy chip to play with, in both hardware and software.
  Hence, it's a good chip to use as an example when teaching about computer
  hardware. Unfortunately, the simulators in use in my school were a bit outdated,
  so I decided to write a new one.

  The scope of the emulator is to help test and debug 8051 assembler programs.
  What is particularily left out is clock-cycle exact simulation of processor pins.
  (For instance, MUL is a 48-clock operation on the 8051. On which clock cycle does
  the CPU read the operands? Or write the result?). Such simulation might help in
  designing some hardware, but for most uses it is unneccessary and complicated.


pkgId: 9417ee4e4d3bad292504a203e3397b5e94a481315d3335c7f162686662eab4fd
name: enca
arch: src
version: 1.19
epoch: 0
release: 14.fc40
summary: Character set analyzer and detector
url: http://cihar.com/software/enca
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/enca-1.19-14.fc40.src.rpm
checksum_type: sha256
description:
  Enca is an Extremely Naive Charset Analyser. It detects character set and
  encoding of text files and can also convert them to other encodings using
  either a built-in converter or external libraries and tools like libiconv,
  librecode, or cstocs.

  Currently, it has support for Belarussian, Bulgarian, Croatian, Czech,
  Estonian, Latvian, Lithuanian, Polish, Russian, Slovak, Slovene, Ukrainian,
  Chinese and some multibyte encodings (mostly variants of Unicode)
  independent on the language.

  This package also contains shared Enca library other programs can make use of.

  Install enca if you need to cope with text files of dubious origin
  and unknown encoding and convert them to some reasonable encoding.


pkgId: b43a9eb1658aa573ee990b7d247b8fd0ca8a476d435aff4492c0f6ee3cb584a1
name: enet
arch: src
version: 1.3.17
epoch: 0
release: 9.fc40
summary: Thin, simple and robust network layer on top of UDP
url: http://sauerbraten.org/enet/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/enet-1.3.17-9.fc40.src.rpm
checksum_type: sha256
description:
  ENet is a relatively thin, simple and robust network communication layer on
  top of UDP (User Datagram Protocol). The primary feature it provides is
  optional reliable, in-order delivery of packets.

  ENet is NOT intended to be a general purpose high level networking library
  that handles authentication, lobbying, server discovery, compression,
  encryption and other high level, often application level or dependent tasks.


pkgId: c3ac9bb0628c4b6304503002b1ff94bc2cf448b9def522e92e0e1b460c210ca9
name: engauge-digitizer
arch: src
version: 12.1
epoch: 1
release: 14.fc40
summary: Convert graphs or map files into numbers
url: http://markummitchell.github.io/engauge-digitizer/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/engauge-digitizer-12.1-14.fc40.src.rpm
checksum_type: sha256
description:
  The Engauge Digitizer tool accepts image files
  (like PNG, JPEG and TIFF) containing graphs,
  and recovers the data points from those graphs.
  The resulting data points are usually used as input
  to other software applications.
  Conceptually, Engauge Digitizer is the opposite of
  a graphing tool that converts data points to graphs.
  The process is shown below - an image file is imported,
  digitized within Engauge, and exported as a table of
  numeric data to a text file.
  Work can be saved into an Engauge DIG file.

  New features already added to Engauge:

  -  Grid lines are displayed for fine adjustments of the axis points
     that define the coordinate systems
  -  Automated line and point extraction rapidly digitizes data
  -  Image processing for separating important details from background information
  -  Undo/redo of all operations means recovering from mistakes and experimenting
     with options is painless
  -  Installers for Windows and OSX operating systems, and repository packages for
     Linux make installation easy
  -  Wizard provides an interactive tutorial to explain the basic steps
  -  Wizard creates a checklist guide to interactively leads user through steps from
     file import to file export
  -  Cubic spline interpolation between points gives more accurate curves with
     fewer points
  -  Axes Checker briefly highlights the axes when they are defined or modified,
     to reveal entry mistakes
  -  Graph coordinates can be specified as date and time values, or as degrees,
     minutes and seconds
  -  File import and data export by drag-and-drop and copy/paste
  -  Test suite for regression testing minimizes code breakage as
     new features are added
  -  Multiple coordinate systems in the same image can be digitized in
     advanced mode
  -  Axes with only one known coordinate (floating axes) can be digitized in
     advanced mode
  -  Geometry Window displays geometric information about the selected curve
  -  Curve Fitting Window fits a polynomial function to the selected curve


pkgId: 03be13d01db3965f4167ca13623315e2220a4e6fbf667274a6a64241b6c6e792
name: engrampa
arch: src
version: 1.28.1
epoch: 0
release: 1.fc40
summary: MATE Desktop file archiver
url: http://mate-desktop.org
rpm_license: GPLv2+ and LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/engrampa-1.28.1-1.fc40.src.rpm
checksum_type: sha256
description:
  Mate File Archiver is an application for creating and viewing archives files,
  such as zip, xv, bzip2, cab, rar and other compress formats.


pkgId: 0138b700f0d0f345608c5a40b4b19a8ccec48ce4649139b99d53a7f800ee5088
name: enki
arch: src
version: 22.08.0
epoch: 0
release: 6.fc40
summary: Text editor for programmers
url: http://enki-editor.org/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/enki-22.08.0-6.fc40.src.rpm
checksum_type: sha256
description:
  Enki is a text editor for programmers. It is:

      - User friendly. Intuitive interface. Works out of the box. You don’t have
        to read a lot of docs.
      - Hacker friendly. Work as quickly as possible. Navigate efficiently without
        your mouse.
      - Advanced. You invent software. An editor helps you focus on inventing,
        instead of fighting with your tools.
      - Extensible. Operating systems are designed for running applications. Enki
        is designed for running plugins.
      - Cross platform. Use your habitual editor on any OS. Tested on Linux and
        Windows. Users report that Enki works Mac OS X.
      - High quality. No long list of fancy features. But, what is done, is done
        well.
      - Open source. Created, tested, and designed for the community, by the
        community, and with the community.


pkgId: 23be287253337d8e120772847524d0c78035a367fd868d3c3da12e6738c2357c
name: enscript
arch: src
version: 1.6.6
epoch: 0
release: 34.fc40
summary: A plain ASCII to PostScript converter
url: http://www.gnu.org/software/enscript
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/enscript-1.6.6-34.fc40.src.rpm
checksum_type: sha256
description:
  GNU enscript is a free replacement for Adobe's Enscript
  program. Enscript converts ASCII files to PostScript(TM) and spools
  generated PostScript output to the specified printer or saves it to a
  file. Enscript can be extended to handle different output media and
  includes many options for customizing printouts

rpm_license:
  LGPL-2.0-or-later AND GPL-3.0-or-later AND GPL-2.0-or-later AND GPL-3.0-or-later WITH Bison-exception-2.2 AND LGPL-2.1-or-later


pkgId: 8ad83ab07fcda2946ba2d12a35f4063ab0a2e45fe7c213d712aac4ddc954748a
name: entangle
arch: src
version: 3.0
epoch: 0
release: 7.fc40
summary: Tethered shooting & control of digital cameras
url: https://entangle-photo.org/
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/entangle-3.0-7.fc40.src.rpm
checksum_type: sha256
description:
  Entangle is an application which uses GTK and libgphoto2 to provide a
  graphical interface for tethered photography with digital cameras.

  It includes control over camera shooting and configuration settings
  and 'hands off' shooting directly from the controlling computer.


pkgId: 11b7cb96f7d0d2e8099fe626f9086bafd59b9b559ce4546d66402dc3332e545b
name: entr
arch: src
version: 5.4
epoch: 0
release: 3.fc40
summary: Run arbitrary commands when files change
url: http://eradman.com/entrproject/
rpm_license: ISC AND BSD-2-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/entr-5.4-3.fc40.src.rpm
checksum_type: sha256
description:
  A utility for running arbitrary commands when files change. Uses inotify to
  avoid polling. It was written to make rapid feedback and automated testing
  natural and completely ordinary.


pkgId: 1e334f6252b4721ae16eee85effcb111e395d5a9ac119780a510299d10cfc08a
name: entypo-fonts
arch: src
version: 20121031
epoch: 0
release: 21.fc40
summary: Pictogram Suite font
url: http://www.entypo.com/
rpm_license: CC-BY-SA
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/entypo-fonts-20121031-21.fc40.src.rpm
checksum_type: sha256
description:
  Entypo is a set of 250+ carefully crafted pictograms. The source contains
  an icon font — OpenType, TrueType and @font-face — EPS, PDF and PSD files.
  Only the Desktop  ttf font is packaged, the other fonts contains
  trademarked symbols.


pkgId: 5fc22a1195f5d9d11eee1ce82f480c4d1a8010068da8828807f21f5c44e80747
name: enum
arch: src
version: 1.1
epoch: 0
release: 27.fc40
summary: Seq- and jot-like enumerator
url: https://fedorahosted.org/enum
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/enum-1.1-27.fc40.src.rpm
checksum_type: sha256
description:
  Utility enum enumerates values (numbers) between two values, possibly
  further adjusted by a step and/or a count, all given on the command line.
  Before printing, values are passed through a formatter. Very fine control
  over input interpretation and output is possible.


pkgId: 9ece0d33564252e1be2daa07e1d5261c1f3073233f23a24accea29d3b6e9a9a0
name: environment-modules
arch: src
version: 5.4.0
epoch: 0
release: 1.fc40
summary: Provides dynamic modification of a user's environment
url: http://modules.sourceforge.net/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/environment-modules-5.4.0-1.fc40.src.rpm
checksum_type: sha256
description:
  The Environment Modules package provides for the dynamic modification of
  a user's environment via modulefiles.

  Each modulefile contains the information needed to configure the shell
  for an application. Once the Modules package is initialized, the
  environment can be modified on a per-module basis using the module
  command which interprets modulefiles. Typically modulefiles instruct
  the module command to alter or set shell environment variables such as
  PATH, MANPATH, etc. modulefiles may be shared by many users on a system
  and users may have their own collection to supplement or replace the
  shared modulefiles.

  Modules can be loaded and unloaded dynamically and atomically, in an
  clean fashion. All popular shells are supported, including bash, ksh,
  zsh, sh, csh, tcsh, as well as some scripting languages such as perl.

  Modules are useful in managing different versions of applications.
  Modules can also be bundled into metamodules that will load an entire
  suite of different applications.

  NOTE: You will need to get a new shell after installing this package to
  have access to the module alias.


pkgId: 370fb42d1b563000c93a9c0fe21c227b526cc8a157e78d05c94601d34d8d6087
name: eog
arch: src
version: 45.3
epoch: 0
release: 1.fc40
summary: Eye of GNOME image viewer
url: https://wiki.gnome.org/Apps/EyeOfGnome
rpm_license: GPL-2.0-or-later AND CC-BY-SA-3.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/eog-45.3-1.fc40.src.rpm
checksum_type: sha256
description:
  The Eye of GNOME image viewer (eog) is the official image viewer for the
  GNOME desktop. It can view single image files in a variety of formats, as
  well as large image collections.

  eog is extensible through a plugin system.


pkgId: 74572258d45bdded5035d76ea07c6c540f75a4eb9497583c829547f037ff0d2f
name: eog-plugins
arch: src
version: 44.0
epoch: 0
release: 4.fc40
summary: A collection of plugins for the eog image viewer
url: https://wiki.gnome.org/Apps/EyeOfGnome/Plugins
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/eog-plugins-44.0-4.fc40.src.rpm
checksum_type: sha256
description:
  It's a collection of plugins for use with the Eye of GNOME Image Viewer.
  The included plugins provide a map view for where the picture was taken,
  display of Exif information, Zoom to fit, etc.


pkgId: 1ee56c74978c224f41fb803707412a28e2fd16cea0bfeb2d4df1def62bd16ddf
name: eom
arch: src
version: 1.28.0
epoch: 0
release: 1.fc40
summary: Eye of MATE image viewer
url: http://mate-desktop.org
rpm_license: GPLv2+ and LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/eom-1.28.0-1.fc40.src.rpm
checksum_type: sha256
description:
  The Eye of MATE (eom) is the official image viewer for the
  MATE desktop. It can view single image files in a variety of formats, as
  well as large image collections.
  Eye of Mate is extensible through a plugin system.


pkgId: 9d746f3a4981bc2ee9f3b80e6d0b2aa63bb29132f31be491b5a104dc1580d5f3
name: eot-utils
arch: src
version: 1.1
epoch: 0
release: 40.fc40
summary: Create or examine EOT font format files
url: https://www.w3.org/Tools/eot-utils/
rpm_license: W3C
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/eot-utils-1.1-40.fc40.src.rpm
checksum_type: sha256
description:
  The eot-utils are the two programs mkeot and eotinfo. The former creates an EOT
  (Embedded OpenType) file from an OpenType or TrueType font and the URLs of one
  or more Web pages, respecting the TrueType embedding bits. The eotinfo program
  displays EOT metadata in a human-readable way.


pkgId: 4adc29000947089578ab679d37ed4285ab5b5c952243a3a2d044cf9b89b174e7
name: ephemeral
arch: src
version: 7.1.0
epoch: 0
release: 6.fc40
summary: Private-by-default, always-incognito browser
url: https://github.com/cassidyjames/ephemeral
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ephemeral-7.1.0-6.fc40.src.rpm
checksum_type: sha256
description:
  Browse the Internet in private without leaving a trace of history on your
  computer. Ephemeral is a stripped down private browser that's perfect for
  avoiding persistent cookies or web trackers. Close the window and all traces of
  your browsing are removed from your device.


pkgId: 26df02eaef812611d03f9a1e906788654eb831d0dc05beb20e0586428dfe9a5c
name: epic
arch: src
version: 2.10.10
epoch: 4
release: 11.fc40
summary: An ircII chat client
url: http://www.epicsol.org/
rpm_license: BSD-3-Clause AND ISC AND LicenseRef-Fedora-Public-Domain
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/epic-2.10.10-11.fc40.src.rpm
checksum_type: sha256
description:
  EPIC (Enhanced Programmable ircII Client) is an advanced ircII chat
  client.  Chat clients connect to servers around the world, enabling
  you to chat with other people.


pkgId: 6c356a7a71d08b42eb1a05348d2d77503e5690e5ad2bc1208995d36c61076387
name: epix
arch: src
version: 1.2.22
epoch: 0
release: 5.fc40
summary: Utilities for mathematically accurate figures
url: https://mathcs.holycross.edu/~ahwang/current/ePiX.html
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/epix-1.2.22-5.fc40.src.rpm
checksum_type: sha256
description:
  ePiX (pronounced like "epic" with a soft "k", playing on "TeX"), a
  collection of command line utilities for *nix, creates mathematically
  accurate figures, plots, and movies using easy-to-learn syntax. The
  output is expressly designed for use with LaTeX.


pkgId: 21af7355cd35d359aab075d2b52dcaa7cc453febfc2dcfbf02521ff4ce2e50b1
name: epson-inkjet-printer-escpr
arch: src
version: 1.7.21
epoch: 1
release: 6.1lsb3.2.fc40
summary: Drivers for Epson inkjet printers
url: http://download.ebz.epson.net/dsc/search/01/search/?OSC=LX
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/epson-inkjet-printer-escpr-1.7.21-6.1lsb3.2.fc40.src.rpm
checksum_type: sha256
description:
  This package contains drivers for Epson Inkjet printers that use
  the New Generation Epson Printer Control Language.

  For a detailed list of supported printers, please refer to
  http://avasys.jp/english/linux_e/


pkgId: d5bf5ae32b2ef463a0a92fa130623670622d29277cff82056b120c6a032212c8
name: epstool
arch: src
version: 3.08
epoch: 0
release: 28.fc40
summary: A utility to create or extract preview images in EPS files
url: http://pages.cs.wisc.edu/~ghost/gsview/epstool.htm
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/epstool-3.08-28.fc40.src.rpm
checksum_type: sha256
description:
  Epstool is a utility to create or extract preview images in EPS files,
  fix bounding boxes and convert to bitmaps.

  Features:
  * Add EPSI, DOS EPS or Mac PICT previews.
  * Extract PostScript from DOS EPS files.
  * Uses Ghostscript to create preview bitmaps.
  * Create a TIFF, WMF, PICT or Interchange preview from part of a
    bitmap created by Ghostscript.
  * works under Win32, Win64, OS/2 and Unix.
  * works on little-endian machines (Intel) or big endian (Sun Sparc,
    Motorola) machines.


pkgId: 1b79b84c4397a501451847a72eac0ea4879bb7ee2bb041586161d1bfcbaa98f2
name: equalx
arch: src
version: 0.7.1
epoch: 0
release: 25.fc40
summary: A graphical editor for writing LaTeX equations
url: http://equalx.sourceforge.net
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/equalx-0.7.1-25.fc40.src.rpm
checksum_type: sha256
description:
  EqualX is an application that helps you to write equations in LaTeX
  and to preview them in real-time.


pkgId: b90a095f2125704f7d852b6e338363008a8d95683fcef5b17cb4ae3fe9bdd203
name: erfa
arch: src
version: 2.0.1
epoch: 0
release: 3.fc40
summary: Essential Routines for Fundamental Astronomy
url: https://github.com/liberfa/erfa
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/erfa-2.0.1-3.fc40.src.rpm
checksum_type: sha256
description:
  ERFA is a C library containing key algorithms for astronomy, and is
  based on the SOFA library published by the International Astronomical
  Union (IAU).


pkgId: 2042b8b984a324fcb2de0941bf43c1719f835cb01ed1f854c7b6ebf3fea4581d
name: erlang-erlsom
arch: src
version: 1.5.0
epoch: 0
release: 12.fc40
summary: Support for XML Schema in Erlang
url: https://github.com/willemdj/erlsom
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/erlang-erlsom-1.5.0-12.fc40.src.rpm
checksum_type: sha256
description:
  Erlsom is a set of functions to deal with XML Schema (XSDs) in Erlang.
  First you 'compile' the schema, and after that you can parse XML
  documents that conform to the schema. The result is a structure of
  Erlang records, based on the types that are defined by the Schema.
  Or, the other way around, a structure of records can be translated
  to an XML document.


pkgId: d4bafe8e7667c346732f646ef9105f32f4bdb0e2f99eba4ffd68873ff09506e6
name: erlang-gen_leader
arch: src
version: 1.0
epoch: 0
release: 28.fc40
summary: A leader election behavior modeled after gen_server
url: https://github.com/garret-smith/gen_leader_revival
rpm_license: ERPL
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/erlang-gen_leader-1.0-28.fc40.src.rpm
checksum_type: sha256
description:
  This application implements a leader election behavior modeled after gen_server.
  This behavior intends to make it reasonably straightforward to implement a fully
  distributed server with master-slave semantics.


pkgId: e93b414831d137d36784686ddfecca851420ab57cf0e16b3ef2a9d75d825d5db
name: erlang-hamcrest
arch: src
version: 0.1.0
epoch: 0
release: 23.fc40
summary: A framework for writing matcher objects using declarative rules
url: https://github.com/hyperthunk/hamcrest-erlang
rpm_license: MIT and BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/erlang-hamcrest-0.1.0-23.fc40.src.rpm
checksum_type: sha256
description:
  Hamcrest is a framework for writing matcher objects allowing 'match' rules to
  be defined declaratively. There are a number of situations where matchers are
  invaluable, such as UI validation, or data filtering, but it is in the area of
  writing flexible tests that matchers are most commonly used.


pkgId: 604320ddaac7c134cf8504be47c551f54d162ec1b83bd9c3a402869df9ef026b
name: erlang-lfe
arch: src
version: 2.1.1
epoch: 0
release: 5.fc40
summary: Lisp Flavoured Erlang
url: https://github.com/rvirding/lfe
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/erlang-lfe-2.1.1-5.fc40.src.rpm
checksum_type: sha256
description:
  Lisp Flavoured Erlang, is a lisp syntax front-end to the Erlang
  compiler. Code produced with it is compatible with "normal" Erlang
  code. An LFE evaluator and shell is also included.


pkgId: 5729fc0b33e2d85785c6c9c58daf96440af027268dc004c3b0599cb8cab25505
name: erlang-mustache
arch: src
version: 0.1.1
epoch: 0
release: 23.fc40
summary: Mustache template engine for Erlang
url: https://github.com/mojombo/mustache.erl
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/erlang-mustache-0.1.1-23.fc40.src.rpm
checksum_type: sha256
description:
  An Erlang port of Mustache for Ruby. Mustache is a framework-agnostic template
  system that enforces separation of view logic from the template file. Indeed, it
  is not even possible to embed logic in the template. This allows templates to be
  reused across language boundaries and for other language independent uses.


pkgId: 7c2384d459b0ff807e03d0b58e2c9e957a58cf6dd345c40c13dcf06158171aff
name: erlang-riak_pb
arch: src
version: 2.3.2
epoch: 0
release: 19.fc40
summary: Riak Protocol Buffers Messages
url: https://github.com/basho/riak_pb
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/erlang-riak_pb-2.3.2-19.fc40.src.rpm
checksum_type: sha256
description:
  The message definitions for the Protocol Buffers-based interface to Riak and
  various Erlang-specific utility modules for the message types.


pkgId: 1db220c83085df151253e0b125d6bf32ed1165e9ab0e143fe932089a7e1c0b49
name: erlang-sidejob
arch: src
version: 2.0.2
epoch: 0
release: 15.fc40
summary: An Erlang library that implements a parallel, capacity-limited request pool
url: https://github.com/basho/sidejob
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/erlang-sidejob-2.0.2-15.fc40.src.rpm
checksum_type: sha256
description:
  An Erlang library that implements a parallel, capacity-limited request pool. In
  sidejob, these pools are called resources. A resource is managed by multiple
  gen_server like processes which can be sent calls and casts using sidejob:call
  or sidejob:cast respectively.


pkgId: a746cc85e8b3c15101958e2d7a453c3762ba8d0bce605bdb405dbdde30eb620d
name: erofs-utils
arch: src
version: 1.7.1
epoch: 0
release: 3.fc40
summary: Utilities for working with EROFS
url: https://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/erofs-utils-1.7.1-3.fc40.src.rpm
checksum_type: sha256
description:
  EROFS stands for Enhanced Read-Only File System.  It aims to be a general
  read-only file system solution for various use cases instead of just focusing
  on saving storage space without considering runtime performance.

  This package includes tools to create, check, and extract EROFS images.

rpm_license:
  GPL-2.0-only AND GPL-2.0-or-later AND (GPL-2.0-only OR Apache-2.0) AND (GPL-2.0-or-later OR Apache-2.0) AND (GPL-2.0-only OR BSD-2-Clause) AND (GPL-2.0-or-later OR BSD-2-Clause) AND Unlicense


pkgId: 7f555ad56f8d3722657e62ea764f3df28cb84d269ea17eb0859a617c8b8137b9
name: esh
arch: src
version: 0.3.2
epoch: 0
release: 6.fc40
summary: Simple templating engine based on shell
url: https://github.com/jirutka/esh
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/esh-0.3.2-6.fc40.src.rpm
checksum_type: sha256
description:
  esh (embedded shell) is a templating engine for evaluating shell commands
  embedded in arbitrary templates. It’s like ERB (Embedded RuBy) for shell,
  intended to be used for templating configuration files.


pkgId: fb1516ffe64aafded770f565c6e3bef72d609f5bcda3d21027b8d77d082b7fa8
name: esound
arch: src
version: 0.2.41
epoch: 1
release: 33.fc40
summary: Allows several audio streams to play on a single audio device
url: https://ftp.gnome.org/pub/GNOME/sources/esound
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/esound-0.2.41-33.fc40.src.rpm
checksum_type: sha256
description:
  EsounD, the Enlightened Sound Daemon, is a server process that mixes
  several audio streams for playback by a single audio device. For
  example, if you're listening to music on a CD and you receive a
  sound-related event from ICQ, the two applications won't have to
  queue for the use of your sound card.

  Install esound if you'd like to let sound applications share your
  audio device. You'll also need to install the audiofile package.


pkgId: 45e42a97ad43116538b0c80f96590d2bc8328896ed226f9056b56d742a6e0c34
name: espeak
arch: src
version: 1.48.04
epoch: 0
release: 29.fc40
summary: Software speech synthesizer (text-to-speech)
url: http://espeak.sourceforge.net
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/espeak-1.48.04-29.fc40.src.rpm
checksum_type: sha256
description:
  eSpeak is a software speech synthesizer for English and other languages.

  eSpeak produces good quality English speech. It uses a different synthesis
  method from other open source TTS engines, and sounds quite different.
  It's perhaps not as natural or "smooth", but some people may find the
  articulation clearer and easier to listen to for long periods. eSpeak supports
  several languages, however in most cases these are initial drafts and need more
  work to improve them.

  It can run as a command line program to speak text from a file or from stdin.


pkgId: 581657bdd9f6338702469b4b01b47bfc9709859f2cd3d68fdf494d22a1ff53a1
name: espeak-ng
arch: src
version: 1.51.1
epoch: 0
release: 8.fc40
summary: eSpeak NG Text-to-Speech
url: https://github.com/espeak-ng/espeak-ng
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/espeak-ng-1.51.1-8.fc40.src.rpm
checksum_type: sha256
description:
  The eSpeak NG (Next Generation) Text-to-Speech program is an open source speech
  synthesizer that supports over 70 languages. It is based on the eSpeak engine
  created by Jonathan Duddington. It uses spectral formant synthesis by default
  which sounds robotic, but can be configured to use Klatt formant synthesis
  or MBROLA to give it a more natural sound.

rpm_license:
  GPL-3.0-only AND GPL-3.0-or-later AND Apache-2.0 AND BSD-2-Clause AND Unicode-DFS-2016 AND CC-BY-SA-3.0


pkgId: cae840494d9176e415b147ebf9fc63aaf1582d361a78f1f5b7f2b37437b2bf10
name: ethstatus
arch: src
version: 0.4.9
epoch: 0
release: 10.fc40
summary: Console-based ethernet statistics monitor
url: http://packages.debian.org/stable/net/ethstatus
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ethstatus-0.4.9-10.fc40.src.rpm
checksum_type: sha256
description:
  EthStatus is a simple, easy to use program for displaying commonly
  needed / wanted statistics in real time about ingoing and outgoing
  traffic that is usually hard to find, with a simple, efficient
  interface.


pkgId: 4a60b1fc37377181c71f8b2fb1b759c91c36045a28a60ccbea90e8323b9bc318
name: evemu
arch: src
version: 2.7.0
epoch: 0
release: 28.fc40
summary: Event Device Query and Emulation Program
url: http://www.freedesktop.org/wiki/Evemu
rpm_license: GPL-3.0-only AND LGPL-3.0-only AND GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/evemu-2.7.0-28.fc40.src.rpm
checksum_type: sha256
description:
  evemu is a simple utility to capture the event stream from input devices
  and replay that stream on a virtual input device.


pkgId: 01b83c5509c5fff13ea5fe95b4047227147b0f8b91c1187156fa8241e5cd0084
name: eventlog
arch: src
version: 0.2.13
epoch: 0
release: 26.fc40
summary: Syslog-ng v2/v3 support library
url: http://www.balabit.com/network-security/syslog-ng/opensource-logging-system
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/eventlog-0.2.13-26.fc40.src.rpm
checksum_type: sha256
description:
  The EventLog library aims to be a replacement of the simple syslog() API
  provided on UNIX systems. The major difference between EventLog and syslog
  is that EventLog tries to add structure to messages.

  EventLog provides an interface to build, format and output an event record.
  The exact format and output method can be customized by the administrator
  via a configuration file.

  This package is the runtime part of the library.


pkgId: 58b3734bbd8edcc89dec7195574022af22d51eb4a9a25e7f3aec7c4f8199a75d
name: evtest
arch: src
version: 1.35
epoch: 0
release: 7.fc40
summary: Event device test program
url: http://gitlab.freedesktop.org/libevdev/evtest/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/evtest-1.35-7.fc40.src.rpm
checksum_type: sha256
description:
  evtest is a simple utility to query information about input devices
  and watch the event stream generated by input devices.


pkgId: c4143be0aa0a85367b3dff2f26bf332e157411d47a7220ca1e59114fe2653fe1
name: examiner
arch: src
version: 0.5
epoch: 0
release: 34.fc40
summary: Utility to disassemble and comment foreign executable binaries
url: http://www.academicunderground.org/examiner
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/examiner-0.5-34.fc40.src.rpm
checksum_type: sha256
description:
  The Examiner is an application that utilizes the objdump command to disassemble
  and comment foreign executable binaries. This app was designed to analyze static
  compiled binaries but works ok with others. The intention is for forensic
  research but could also be used in general reverse engineering.
  This program can only handle basic dissassembly. If the binary has been modified
  to resist debugging then the Examinier probably will not be able to analyze the
  code. Also the Examiner will not analyze live running code.


pkgId: 2fd415ff1c9f8850060094881a033bf9279231875df8b8892d7ed496cb2fa683
name: execstack
arch: src
version: 0.5.0
epoch: 0
release: 27.fc40
summary: Utility to set/clear/query executable stack bit
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/execstack-0.5.0-27.fc40.src.rpm
checksum_type: sha256
description:
  This package is built from prelink sources but contains just the
  execstack binary. It can be used manipulate ELF binaries to run
  with or without executable stack.


pkgId: c2fe4e21a474956518b0960b389c77526a77db80096b94ba0bb128b6e26378f5
name: exempi
arch: src
version: 2.6.4
epoch: 0
release: 5.fc40
summary: Library for easy parsing of XMP metadata
url: http://libopenraw.freedesktop.org/wiki/Exempi
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/exempi-2.6.4-5.fc40.src.rpm
checksum_type: sha256
description:
  Exempi provides a library for easy parsing of XMP metadata. It is a port of
  Adobe XMP SDK to work on UNIX and to be build with GNU automake.
  It includes XMPCore and XMPFiles.


pkgId: f3a12abed1c2ae1de626ad366c1b90ff0936c4c7037cd4120a3bb25ebcf3b0a9
name: exim-doc
arch: src
version: 4.73
epoch: 0
release: 25.fc40
summary: Documentation for the exim mail transfer agent
url: http://www.exim.org/
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/exim-doc-4.73-25.fc40.src.rpm
checksum_type: sha256
description:
  Exim is a mail transport agent (MTA) developed at the University of
  Cambridge for use on Unix systems connected to the Internet. This
  package contains the documentation for Exim, also available on the
  web at http://www.exim.org/


pkgId: fd8564df1d51ea3f75ed130d89ae7bac217b8dccee6ff2716c6f8331285f3738
name: expat
arch: src
version: 2.6.0
epoch: 0
release: 1.fc40
summary: An XML parser library
url: https://libexpat.github.io/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/expat-2.6.0-1.fc40.src.rpm
checksum_type: sha256
description:
  This is expat, the C library for parsing XML, written by James Clark. Expat
  is a stream oriented XML parser. This means that you register handlers with
  the parser prior to starting the parse. These handlers are called when the
  parser discovers the associated structures in the document being parsed. A
  start tag is an example of the kind of structures for which you may
  register handlers.


pkgId: 4e39bd130741a10222cd323e82fd0522641a9b00cfbdc502a2bd1331f0ed403d
name: expect
arch: src
version: 5.45.4
epoch: 0
release: 23.fc40
summary: A program-script interaction and testing utility
url: https://core.tcl.tk/expect/index
rpm_license: LicenseRef-Fedora-Public-Domain
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/expect-5.45.4-23.fc40.src.rpm
checksum_type: sha256
description:
  Expect is a tcl application for automating and testing
  interactive applications such as telnet, ftp, passwd, fsck,
  rlogin, tip, etc. Expect makes it easy for a script to
  control another program and interact with it.

  This package contains expect and some scripts that use it.


pkgId: c5e8646cdd7fbb734bebfbb75ff4c32680d7136108386a9f10b43fdc73a01b4d
name: extractpdfmark
arch: src
version: 1.1.1
epoch: 0
release: 5.fc40
summary: Extract page mode and named destinations as PDFmark from PDF
url: https://github.com/trueroad/extractpdfmark/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/extractpdfmark-1.1.1-5.fc40.src.rpm
checksum_type: sha256
description:
  When you create a PDF document using something like a TeX system you may include
  many small PDF files in the main PDF file. It is common for each of the small
  PDF files to use the same fonts.

  If the small PDF files contain embedded font subsets, the TeX system includes
  them as-is in the main PDF. As a result, several subsets of the same font are
  embedded in the main PDF. It is not possible to remove the duplicates since they
  are different subsets. This vastly increases the size of the main PDF file.

  On the other hand, if the small PDF files contain embedded full font sets, the
  TeX system also includes all of them in the main PDF. This time, the main PDF
  contains duplicates of the same full sets of fonts. Therefore, Ghostscript can
  remove the duplicates. This may considerably reduce the main PDF-file's size.

  Finally, if the small PDF files contain some fonts that are not embedded, the
  TeX system outputs the main PDF file with some fonts missing. In this case,
  Ghostscript can embed the necessary fonts. It can significantly reduce the
  required disk size.

  Either way, when Ghostscript reads the main PDF produced by the TeX system and
  outputs the final PDF it does not preserve PDF page-mode and named-destinations
  etc. As a result, when you open the final PDF, it is not displayed correctly.
  Also, remote PDF links will not work correctly.

  This program is able to extract page mode and named destinations as PDFmark from
  PDF. By using this you can get the small PDF files that have preserved them.


pkgId: 5e6c1092ab2d7859ab12c9a563168da206ccfb8e5e3c02fa2ef549588684f46a
name: extundelete
arch: src
version: 0.2.4
epoch: 0
release: 25.fc40
summary: Utility to recover deleted files from ext3 and ext4 filesystem
url: http://extundelete.sourceforge.net
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/extundelete-0.2.4-25.fc40.src.rpm
checksum_type: sha256
description:
  extundelete is a utility that can recover deleted files from an ext3 or ext4
  partition. extundelete uses the information stored in the partition's journal
  to attempt to recover a file that has been deleted from the partition. There is
  no guarantee that any particular file will be able to be undeleted, so always
  try to have a good backup system in place, or at least put one in place after
  recovering your files!

  Important: A deleted file can most likely not be recovered on ext4 filesystems
  when it has been created using the features "64bit" and/or "metadata_csum". As
  extundelete is no longer maintained by upstream, the practical use is limited.


pkgId: 738fbfcdc36fa040cf68ef1ad3724a8e399bdbd5414c39a7cb7b0d16a8a03239
name: ezstream
arch: src
version: 1.0.2
epoch: 0
release: 8.fc40
summary: Command line source client for Icecast media streaming servers
url: https://www.icecast.org/ezstream/
rpm_license: GPLv2 and MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/ezstream-1.0.2-8.fc40.src.rpm
checksum_type: sha256
description:
  Ezstream is a command line source client for media streams, primarily for
  streaming to Icecast servers.

  It allows the creation of media streams based on input from files or standard
  input that is piped through an optional external decoder and encoder. As every
  part of this chain is highly configurable, ezstream can be useful in a large
  number of streaming setups.

  Supported media containers for streaming are MP3, Ogg, Theora, WebM, and
  Matroska. Supported transport protocols are HTTP, ICY, and RoarAudio.
  Metadata support is provided by TagLib library.


pkgId: 5e02331a383882aaa0390ab751991cdfa3a57c0192eb3083e23e1c62a57d2a67
name: f2c
arch: src
version: 20210928
epoch: 0
release: 8.fc40
summary: A Fortran 77 to C/C++ conversion program
url: http://www.netlib.org/f2c/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/f2c-20210928-8.fc40.src.rpm
checksum_type: sha256
description:
  F2c converts Fortran 77 source code to C or C++ source files. If no
  Fortran files are named on the command line, f2c can read Fortran from
  standard input and write C to standard output.


pkgId: 5355217ac6cfb12d1c561a2db731c414bca6a6768fd3037a037ccb95a6c1e558
name: f2fs-tools
arch: src
version: 1.16.0
epoch: 0
release: 4.fc40
summary: Tools for Flash-Friendly File System (F2FS)
url: http://sourceforge.net/projects/f2fs-tools/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/f2fs-tools-1.16.0-4.fc40.src.rpm
checksum_type: sha256
description:
  NAND flash memory-based storage devices, such as SSD, and SD cards,
  have been widely being used for ranging from mobile to server systems.
  Since they are known to have different characteristics from the
  conventional rotational disks,a file system, an upper layer to
  the storage device, should adapt to the changes
  from the sketch.

  F2FS is a new file system carefully designed for the
  NAND flash memory-based storage devices.
  We chose a log structure file system approach,
  but we tried to adapt it to the new form of storage.
  Also we remedy some known issues of the very old log
  structured file system, such as snowball effect
  of wandering tree and high cleaning overhead.

  Because a NAND-based storage device shows different characteristics
  according to its internal geometry or flash memory management
  scheme aka FTL, we add various parameters not only for configuring
  on-disk layout, but also for selecting allocation
  and cleaning algorithms.


pkgId: 048f54986036b100d4fb5dc8ada47190ac071800676217a84c44e5c40da66268
name: f3
arch: src
version: 8.0
epoch: 0
release: 7.fc40
summary: Utility to test for fake flash drives and cards
url: http://oss.digirati.com.br/f3/
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/f3-8.0-7.fc40.src.rpm
checksum_type: sha256
description:
  F3 is a utility to test for fake flash drives and cards. It is a Free
  Software alternative to h2testw.  f3write will fill the unused part of
  a filesystem with files NNNN.fff with known content, and f3read will
  analyze the files to determine whether the contents are corrupted, as
  happens with fake flash.


pkgId: cbb1da4dd4dc5368b3e026d6537b6efdaff3ba652ddb2c83bd8bb04a32cb15d4
name: f39-backgrounds
arch: src
version: 39.0.5
epoch: 0
release: 3.fc40
summary: Fedora 39 default desktop background
url: https://fedoraproject.org/wiki/_Artwork
rpm_license: CC-BY-SA-4.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/f39-backgrounds-39.0.5-3.fc40.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  39 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 9d8dfe4d85842513a97bc79fa261503b108f27b02672f8c45766f7b8d559d464
name: f40-backgrounds
arch: src
version: 40.0.0
epoch: 0
release: 1.fc40
summary: Fedora 40 default desktop background
url: https://fedoraproject.org/wiki/_Artwork
rpm_license: CC-BY-SA-4.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/f40-backgrounds-40.0.0-1.fc40.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  40 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: e2d826f53100128ea3b9169a6571336fb182cb4c4c71f83e566e1df8f51ff1e2
name: fabtests
arch: src
version: 1.18.0
epoch: 0
release: 6.fc40
summary: Test suite for libfabric API
url: https://github.com/ofiwg/libfabric
rpm_license: (BSD-2-Clause OR GPL-2.0-only) AND MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fabtests-1.18.0-6.fc40.src.rpm
checksum_type: sha256
description:
  Fabtests provides a set of examples that uses libfabric - a high-performance
  fabric software library.


pkgId: 8cd656ee8ad77ec0c3ccfa8b1beeb41d7981338d07a98fd2e265c302bd0d4ed2
name: faience-icon-theme
arch: src
version: 0.5
epoch: 0
release: 21.fc40
summary: Faience icon theme
url: https://code.google.com/p/faience-theme
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/faience-icon-theme-0.5-21.fc40.src.rpm
checksum_type: sha256
description:
  The faience icon theme include Faience, Faience-Azur,
  Faience-Claire and Faience-Ocre theme.
  It is cleaned from any nonfree icons.


pkgId: c78f3e744582dce64dcfb26d929157cca49a8fef06c7a36370bfa5c82a286887
name: fakechroot
arch: src
version: 2.20.1
epoch: 0
release: 17.fc40
summary: Gives a fake chroot environment
url: https://github.com/dex4er/fakechroot
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fakechroot-2.20.1-17.fc40.src.rpm
checksum_type: sha256
description:
  fakechroot runs a command in an environment were is additionally
  possible to use the chroot(8) call without root privileges. This is
  useful for allowing users to create their own chrooted environment
  with possibility to install another packages without need for root
  privileges.


pkgId: 26c8e94ef6f9dedcf776cd6f4aed3a5f18913ec9d5efd2e98d6929918901180b
name: fakeroot
arch: src
version: 1.33
epoch: 0
release: 1.fc40
summary: Gives a fake root environment
url: https://tracker.debian.org/pkg/fakeroot
rpm_license: GPLv3+ and LGPLv2+ and (GPL+ or Artistic)
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fakeroot-1.33-1.fc40.src.rpm
checksum_type: sha256
description:
  fakeroot runs a command in an environment wherein it appears to have
  root privileges for file manipulation. fakeroot works by replacing the
  file manipulation library functions (chmod(2), stat(2) etc.) by ones
  that simulate the effect the real library functions would have had,
  had the user really been root.


pkgId: a4b7060f87108912648743e045e566d96c1595a1f738f3c64cd7371652855a6c
name: fapg
arch: src
version: 0.44
epoch: 0
release: 5.fc40
summary: Fast Audio Playlist Generator
url: http://royale.zerezo.com/fapg/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fapg-0.44-5.fc40.src.rpm
checksum_type: sha256
description:
  FAPG means Fast Audio Playlist Generator.
  It is a tool to generate list of audio files (Wav, MP3, Ogg, etc)
  in various formats (M3U, PLS, HTML, etc).
  It is very useful if you have a large amount of audio files
  and you want to quickly and frequently build a playlist.

  It is coded in C to be as fast as possible, and does not use
  any specific audio library (like ID3Lib).
  This allow you to deploy it faster and easier, and to have
  better performances since the less informations are loaded.
  In the other hand, this tool is not (yet) compatible with
  all the known formats.


pkgId: 6f3d798e43a2c0622797c19632c655b39e5210a7c896d92a43ab842b78ecedad
name: fapolicyd
arch: src
version: 1.3.2
epoch: 0
release: 4.fc40
summary: Application Whitelisting Daemon
url: http://people.redhat.com/sgrubb/fapolicyd
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fapolicyd-1.3.2-4.fc40.src.rpm
checksum_type: sha256
description:
  Fapolicyd (File Access Policy Daemon) implements application whitelisting
  to decide file access rights. Applications that are known via a reputation
  source are allowed access while unknown applications are not. The daemon
  makes use of the kernel's fanotify interface to determine file access rights.


pkgId: 85e087bfc39e820f63c18cf05a7e267faa70b457666d480bcd40602e37f58e52
name: fastback
arch: src
version: 0.4
epoch: 0
release: 28.fc40
summary: File uploader, configureable file uploader
url: http://fedorahosted.org/fastback
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fastback-0.4-28.fc40.src.rpm
checksum_type: sha256
description:
  Fastback is a command line tool to upload files to a ticketing system, or
  other configurable URL (FTP,SCP,...).


pkgId: d4a1a4a867b0f1a3381dcb7d4743036a6d425eaee5766e6c0c21be60547713b7
name: fastbit
arch: src
version: 2.0.3
epoch: 0
release: 29.fc40
summary: An Efficient Compressed Bitmap Index Technology
url: https://sdm.lbl.gov/fastbit/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fastbit-2.0.3-29.fc40.src.rpm
checksum_type: sha256
description:
  FastBit is an open-source data processing library following the spirit of NoSQL
  movement. It offers a set of searching functions supported by compressed bitmap
  indexes. It treats user data in the column-oriented manner similar to
  well-known database management systems such as Sybase IQ, MonetDB, and Vertica.
  It is designed to accelerate user's data selection tasks without imposing undue
  requirements.


pkgId: f34068f2b385edcba7b58d2fa11e80ff9c9f7d572aeb34d7fc24a94007fa1c7a
name: fasterxml-oss-parent
arch: src
version: 58
epoch: 0
release: 2.fc40
summary: FasterXML parent pom
url: https://github.com/FasterXML/oss-parent
rpm_license: Apache-2.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fasterxml-oss-parent-58-2.fc40.src.rpm
checksum_type: sha256
description:
  FasterXML is the business behind the Woodstox streaming XML parser,
  Jackson streaming JSON parser, the Aalto non-blocking XML parser, and
  a growing family of utility libraries and extensions.

  FasterXML offers consulting services for adoption, performance tuning,
  and extension.

  This package contains the parent pom file for FasterXML.com projects.


pkgId: c99ccbeb991171ac985fe258bb7da6b54578824e691a8a4d74fa82a8cef59b25
name: fastlz
arch: src
version: 0.1.0
epoch: 0
release: 0.22.20070619svnrev12.fc40
summary: Portable real-time compression library
url: http://fastlz.org/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fastlz-0.1.0-0.22.20070619svnrev12.fc40.src.rpm
checksum_type: sha256
description:
  FastLZ is a lossless data compression library designed for real-time
  compression and decompression. It favors speed over compression ratio.
  Decompression requires no memory. Decompression algorithm is very simple,
  and thus extremely fast.


pkgId: 299336172097453a186e9747c50429b01b02b9352248b1a681f2e3d2b61c40f5
name: fastx_toolkit
arch: src
version: 0.0.14
epoch: 0
release: 34.fc40
summary: Tools to process short-reads FASTA/FASTQ files
url: http://hannonlab.cshl.edu/fastx_toolkit/index.html
rpm_license: AGPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fastx_toolkit-0.0.14-34.fc40.src.rpm
checksum_type: sha256
description:
  The FASTX-Toolkit is a collection of command line tools for
  Short-Reads FASTA/FASTQ files preprocessing.

  Next-Generation sequencing machines usually produce FASTA or FASTQ
  files, containing multiple short-reads sequences (possibly with
  quality information).

  The main processing of such FASTA/FASTQ files is mapping (aka
  aligning) the sequences to reference genomes or other databases using
  specialized programs. Example of such mapping programs are: Blat,
  SHRiMP, LastZ, MAQ and many many others.

  However, It is sometimes more productive to preprocess the FASTA/FASTQ
  files before mapping the sequences to the genome - manipulating the
  sequences to produce better mapping results.

  The FASTX-Toolkit tools perform some of these preprocessing tasks.


pkgId: f7b476461d3dcbaa4f54d9104d88cfaed9e7b6dcf0dd825705caf80f89fb6edf
name: fatrace
arch: src
version: 0.16.3
epoch: 0
release: 7.fc40
summary: Reports file access events from all running processes
url: https://github.com/martinpitt/fatrace
rpm_license: GPLv3
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fatrace-0.16.3-7.fc40.src.rpm
checksum_type: sha256
description:
  fatrace reports file access events from all running processes.

  Its main purpose is to find processes which keep waking up the disk
  unnecessarily and thus prevent some power saving.


pkgId: d712097374a06d8de2cec79b48cc2940cfc43a19f0bca49077d5f36d36712957
name: fatsort
arch: src
version: 1.6.3.622
epoch: 0
release: 8.fc40
summary: FAT sorter for FAT16 and FAT32 filesystems
url: http://fatsort.sourceforge.net/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fatsort-1.6.3.622-8.fc40.src.rpm
checksum_type: sha256
description:
  Fatsort is a utility written in C to sort FAT16 and FAT32 filesystems. It is
  needed to sort files on cheap mp3 players that display files not sorted by
  their name but by the order they appear in the file allocation table (FAT).


pkgId: 7cf8ca148b137e5755cfaa30e4f65bb18ae8f269554dc5dfcae15c8ba69a65b3
name: faust
arch: src
version: 0.9.46
epoch: 0
release: 28.fc40
summary: Compiled language for real-time audio signal processing
url: http://faust.grame.fr/
rpm_license: GPL-2.0-or-later AND MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/faust-0.9.46-28.fc40.src.rpm
checksum_type: sha256
description:
  Faust AUdio STreams is a functional programming language for real-time audio
  signal processing. Its programming model combines two approaches : functional
  programming and block diagram composition. You can think of FAUST as a
  structured block diagram language with a textual syntax.

  FAUST is intended for developers who need to develop efficient C/C++ audio
  plugins for existing systems or full standalone audio applications. Thanks to
  some specific compilation techniques and powerful optimizations, the C++ code
  generated by the Faust compiler is usually very fast. It can generally compete
  with (and sometimes outperform) hand-written C code.

  Programming with FAUST is somehow like working with electronic circuits and
  signals. A FAUST program is a list of definitions that defines a signal
  processor block-diagram : a piece of code that produces output signals
  according to its input signals (and maybe some user interface parameters)


pkgId: dbdae77e2a51e03d211cda415ec434e084a6906295bee78f298b9104e99e7eac
name: fbg2
arch: src
version: 0.4
epoch: 0
release: 32.fc40
summary: A falling block stacking game
url: http://sourceforge.net/projects/fbg/
rpm_license: GPLv2+ and CC-BY-SA
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fbg2-0.4-32.fc40.src.rpm
checksum_type: sha256
description:
  Falling Block Game is a free, open source block stacking game. The object of
  the game is to move and rotate pieces in order to fill in complete rows. The
  more rows you clear at once, the more points you score!


pkgId: 02b7e5de10ce9a82b276f11ee88b47bd27439f076e646c90750e1c374e58f1a9
name: fbreader
arch: src
version: 0.99.4
epoch: 0
release: 15.fc40
summary: E-book reader
url: http://www.fbreader.org/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fbreader-0.99.4-15.fc40.src.rpm
checksum_type: sha256
description:
  FBReader is an e-book reader, with the following main features:

  * Supports several formats: fb2, HTML, CHM, plucker, Palmdoc, zTxt
    (Weasel), TCR (psion), RTF, OEB, OpenReader, mobipocket, plain text.
  * Direct reading from tar, zip, gzip and bzip2 archives. (Multiple
    books in one archive are supported.)
  * Automatic library building.
  * Automatic encoding detection is supported.
  * Automatically generated contents table.
  * Embedded images support.
  * Footnotes/hyperlinks support.
  * Position indicator.
  * Keeps the last open book and the last read positions for all opened
    books between runs.
  * List of last opened books.
  * Automatic hyphenations. Liang's algorithm is used. The same
    algorithm is used in TeX, and TeX hyphenation patterns are used in
    FBReader. Patterns for Czech, English, Esperanto, French, German and
    Russian are included in the current version.
  * Text search.
  * Full-screen mode.
  * Screen rotation by 90, 180 and 270 degrees.


pkgId: b86c4789cd1294ce71d942d2cde99ceaa3e9c773b7cbdf6842a3b4c121033039
name: fbterm
arch: src
version: 1.7
epoch: 0
release: 30.fc40
summary: A frame-buffer terminal emulator
url: http://code.google.com/p/fbterm/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fbterm-1.7-30.fc40.src.rpm
checksum_type: sha256
description:
  FbTerm is a fast terminal emulator for Linux with frame-buffer device.
  Features include:
  - mostly as fast as terminal of Linux kernel while accelerated scrolling
    is enabled on frame-buffer device
  - select font with fontconfig and draw text with freetype2, same as
    Qt/Gtk+ based GUI apps
  - dynamically create/destroy up to 10 windows initially running default
    shell
  - record scroll back history for every window
  - auto-detect text encoding with current locale, support double width
    scripts like  Chinese, Japanese etc
  - switch between configurable additional text encodings with hot keys
    on the fly
  - copy/past selected text between windows with mouse when gpm server
    is running


pkgId: 4ffc54d9e9a067e7199cbd051dd2c411a40f7f99469875e379b32c81324a98e0
name: fbzx
arch: src
version: 4.8.0
epoch: 0
release: 8.fc40
summary: A ZX Spectrum emulator for FrameBuffer
url: https://www.rastersoft.com/programas/fbzx.html
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fbzx-4.8.0-8.fc40.src.rpm
checksum_type: sha256
description:
  FBZX is a Sinclair Spectrum emulator, designed to work at full screen using
  the FrameBuffer or under X-Windows.


pkgId: a1a275c6233da6d23e9c0bdc7a912c10b6b715fa0d3f1d9710ec503b2e31fef5
name: fcft
arch: src
version: 3.1.8
epoch: 0
release: 1.fc40
summary: Simple library for font loading and glyph rasterization
url: https://codeberg.org/dnkl/fcft
rpm_license: MIT AND Unicode-DFS-2016 AND Zlib
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fcft-3.1.8-1.fc40.src.rpm
checksum_type: sha256
description:
  fcft is a small font loading and glyph rasterization library built
  on top of FontConfig, FreeType2 and pixman.
  It can load and cache fonts from a fontconfig-formatted name string,
  e.g. Monospace:size=12, optionally with user configured fallback fonts.


pkgId: 744a4de041fa7ed9402f98c6924387cdf940487095b85c220a225f125dc9a8e6
name: fcgi
arch: src
version: 2.4.0
epoch: 0
release: 49.fc40
summary: FastCGI development kit
url: http://www.fastcgi.com/#TheDevKit
rpm_license: OML
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fcgi-2.4.0-49.fc40.src.rpm
checksum_type: sha256
description:
  FastCGI is a language independent, scalable, open extension to CGI that
  provides high performance without the limitations of server specific APIs.


pkgId: 8425b1643418d038a04072b38bbc39b5b4c526fcb2a0569c4d2b12bcc17c3e8b
name: fcgiwrap
arch: src
version: 1.1.0
epoch: 0
release: 23.20181108git99c942c.fc40
summary: Simple FastCGI wrapper for CGI scripts
url: https://github.com/gnosek/fcgiwrap
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fcgiwrap-1.1.0-23.20181108git99c942c.fc40.src.rpm
checksum_type: sha256
description:
  This package provides a simple FastCGI wrapper for CGI scripts with/
  following features:
   - very lightweight (84KB of private memory per instance)
   - fixes broken CR/LF in headers
   - handles environment in a sane way (CGI scripts get HTTP-related environment
     vars from FastCGI parameters and inherit all the others from
     environment of fcgiwrap )
   - no configuration, so you can run several sites off the same
     fcgiwrap pool
   - passes CGI std error output to std error stream of cgiwrap or FastCGI
   - support systemd socket activation, launcher program like spawn-fcgi
     is no longer required on systemd-enabled distributions


pkgId: 54b79a1e9a50f02ae2d7d22d5fe7593745413f1ecbaf21fbfd7b72b7a1353909
name: fcoe-utils
arch: src
version: 1.0.34
epoch: 0
release: 9.gitb233050.fc40
summary: Fibre Channel over Ethernet utilities
url: http://www.open-fcoe.org
rpm_license: GPL-2.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fcoe-utils-1.0.34-9.gitb233050.fc40.src.rpm
checksum_type: sha256
description:
  Fibre Channel over Ethernet utilities
  fcoeadm - command line tool for configuring FCoE interfaces
  fcoemon - service to configure DCB Ethernet QOS filters, works with lldpad


pkgId: 13376db36489b577634c7d2faef57000b9cee5a57bff3ae1564d0718910da7c9
name: fctxpd
arch: src
version: 0.2
epoch: 0
release: 11.20210326gitc4dba7f.fc40
summary: Fibrechannel transport daemon
url: https://github.com/brocade/bsn-fc-txptd/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fctxpd-0.2-11.20210326gitc4dba7f.fc40.src.rpm
checksum_type: sha256
description:
  The purpose of this daemon is to add FC network intelligence in host and
  host intelligence in FC network. This daemon would inter-operate with
  Brocade FC fabric in order to improve the response time of the MPIO failover.
  In future, it can also collect the congestion related details and perform
  workload analysis, and provide QOS at application level by inter-operating with
  application performance profiling software.


pkgId: e46da6fd610a0ff4d032c7cc1f004be72c902a93ea473770282a79df9145f620
name: fdk-aac-free
arch: src
version: 2.0.0
epoch: 0
release: 13.fc40
summary: Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android
url: https://cgit.freedesktop.org/~wtay/fdk-aac/log/?h=fedora
rpm_license: FDK-AAC
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fdk-aac-free-2.0.0-13.fc40.src.rpm
checksum_type: sha256
description:
  The Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library
  for Android is software that implements part of the MPEG Advanced Audio Coding
  ("AAC") encoding and decoding scheme for digital audio.


pkgId: 1d64e4a3ff60e6257d07a3fb42d377fba4f762ad9c876ed8b0a7fd82d028ac37
name: fedora-dockerfiles
arch: src
version: 0
epoch: 0
release: 0.36.giteab04ff.fc40
summary: Example dockerfiles to assist standing up containers quickly
url: https://github.com/fedora-cloud/Fedora-Dockerfiles.git
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fedora-dockerfiles-0-0.36.giteab04ff.fc40.src.rpm
checksum_type: sha256
description:
  This package provides a community contributed set of examples that can
  assist in learning about Docker containers. Use these examples to
  stand up test environments using the Docker container engine.


pkgId: e62868b415c0f69f5dfd3ee55bcdff7e6932ce228633c0652137520bb758a164
name: fedora-gnat-project-common
arch: src
version: 3.18
epoch: 0
release: 4.fc40
summary: Files shared by Ada libraries
url: https://src.fedoraproject.org/rpms/fedora-gnat-project-common
rpm_license: FSFAP
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fedora-gnat-project-common-3.18-4.fc40.src.rpm
checksum_type: sha256
description:
  The fedora-gnat-project-common package contains files that are used by the GNAT
  project files of multiple Ada libraries, and also GNAT-specific RPM macros.


pkgId: 8595a460ec24db185182b704b651ff4d773d218ea7e5b5cc956c1a53c99fab04
name: fedora-license-data
arch: src
version: 1.43
epoch: 0
release: 1.fc40
summary: Fedora Linux license data
url: https://gitlab.com/fedora/legal/fedora-license-data
rpm_license: CC0-1.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fedora-license-data-1.43-1.fc40.src.rpm
checksum_type: sha256
description:
  This project contains information about licenses used in the Fedora
  Linux project.  Licenses are categorized by their approval or
  non-approval and may include additional notes.  The data files provide
  mappings between the SPDX license expressions and the older Fedora
  license legacy-abbreviations.

  The project also intends to publish the combined license information
  in a number of data file formats and provide a package in Fedora for
  other projects to reference, such as package building tools and
  package checking tools.

  The Fedora Legal team is responsible for this project.


pkgId: 0e156e23d344ef5fcd9639224192b4c34d37a1c5720fc469646a51ddd47c5b5b
name: fedora-logos
arch: src
version: 38.1.0
epoch: 0
release: 5.fc40
summary: Fedora-related icons and pictures
url: https://pagure.io/fedora-logos
rpm_license: LicenseRef-Fedora-Logos
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fedora-logos-38.1.0-5.fc40.src.rpm
checksum_type: sha256
description:
  The fedora-logos package contains image files which incorporate the
  Fedora trademarks (the "Marks"). The Marks are trademarks or registered
  trademarks of Red Hat, Inc. in the United States and other countries and
  are used by permission.

  This package and its content may not be distributed with anything but
  unmodified packages from Fedora Project. It can be used in a Fedora Spin,
  but not in a Fedora Remix. If necessary, this package can be replaced by
  the more liberally licensed generic-logos package.

  See the included COPYING file for full information on copying and
  redistribution of this package and its contents.


pkgId: 16ac4c0bf96cd093bdf85d7dc55646726abea94a96188b21a99018c17d0d45a3
name: fedora-obsolete-packages
arch: src
version: 40
epoch: 0
release: 28
summary: A package to obsolete retired packages
url: https://docs.fedoraproject.org/en-US/packaging-guidelines/#renaming-or-replacing-existing-packages
rpm_license: LicenseRef-Fedora-Public-Domain
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fedora-obsolete-packages-40-28.src.rpm
checksum_type: sha256
description:
  This package exists only to obsolete other packages which need to be removed
  from the distribution. Packages are listed here when they become uninstallable
  and must be removed to allow upgrades to proceed cleanly, or when there is some
  other strong reason to uninstall the package from user systems. The package
  being retired (and potentially becoming unavailable in future releases of
  Fedora) is not a reason to include it here, as long as it doesn't cause upgrade
  problems.

  Note that this package is not installable, but obsoletes other packages by being
  available in the repository.

  Currently obsoleted packages:

    rubygem-byebug < 11.1.3-6
    rubygem-pry-byebug < 3.6.0-14
    (See https://src.fedoraproject.org/rpms/rubygem-byebug/c/245925a225da471c45cc0eae8d499046a6db7800?branch=rawhide)

    rubygem-shoulda < 3.6.0-15
    (See https://src.fedoraproject.org/rpms/rubygem-shoulda/c/ad584cb6c828abf0cfba90769186c9b2613fd946?branch=rawhide)

    perl-Test-Apocalypse < 1.006-30
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2260493)

    texlive-elegantbook < svn64122-67
    texlive-elegantnote < svn62989-67
    texlive-elegantpaper < svn62989-67
    texlive-tablestyles < svn34495.0-67
    texlive-tablestyles-doc < svn34495.0-67
    texlive-pgf-cmykshadings < svn52635-67
    (No ticket was provided!)

    jython < 2.7.1-17
    (See https://src.fedoraproject.org/rpms/jython/c/5b613bd06ba08cea22e9906646b3a37aca4280c1?branch=rawhide)

    sssd-libwbclient < 2.3.1-3
    sssd-libwbclient-devel < 2.3.1-3
    (See https://src.fedoraproject.org/rpms/sssd/c/cf3c8f20eeb0e7fe8cc2cfb0d02db9e5f9ddf04e?branch=rawhide)

    giada < 0.22.0-5
    (See https://src.fedoraproject.org/rpms/giada/c/bcbd322f7822524ebd7f02cbeb5b04cc8a7cec1d?branch=rawhide)

    5minute < 0.2.32-14
    9pfs < 1.0.9-30
    actdiag < 3.0.0-6
    aiodnsbrute < 0.3.3-5
    andriller < 3.3.1-10
    androguard < 3.3.5-13
    androwarn < 1.6.1-13
    awake < 1.0-31
    blockdiag < 3.0.0-7
    brd < 1.0-25
    btest < 0.57-17
    ccnet < 6.1.8-17
    ccnet-devel < 6.1.8-17
    datagrepper < 1.0.1-3
    datanommer-commands < 1.0.3-5
    dlrn < 0.14.0-13
    dnf-plugin-swidtags < 0.8.18-3
    drat-tools < 1.0.3-16
    esphomeflasher < 1.4.0-7
    fedora-gather-easyfix < 0.2.1-91
    fontdump < 1.3.0-29
    freecad < 1:0.20.2-5
    freecad-data < 1:0.20.2-5
    fuse9p < 1.0.9-30
    gdeploy < 3.0.0-15
    gnome-activity-journal < 1.0.0-8
    heat-cfntools < 1.4.2-22
    holland < 1.2.10-3
    holland-common < 1.2.10-3
    holland-commvault < 1.2.10-3
    holland-lvm < 1.2.10-3
    holland-mariabackup < 1.2.10-3
    holland-mongodump < 1.2.10-3
    holland-mysql < 1.2.10-3
    holland-mysqldump < 1.2.10-3
    holland-mysqllvm < 1.2.10-3
    holland-pg_basebackup < 1.2.10-3
    holland-pgdump < 1.2.10-3
    holland-xtrabackup < 1.2.10-3
    imgbased < 1.2.5-0.2
    kf5-kapidox < 5.111.0-2
    kismon < 1.0.2-10
    lnst < 15-16
    lnst-ctl < 15-16
    lnst-slave < 15-16
    mathics+cython < 5.0.2-5
    mathics+full < 5.0.2-5
    mathics < 5.0.2-5
    mathicsscript+full < 5.0.0-2
    mathicsscript < 5.0.0-2
    matrix-synapse+cache-memory < 1.80.0-8
    matrix-synapse+url-preview < 1.80.0-8
    nodepool < 3.13.1-6
    nodepool-builder < 3.13.1-6
    nodepool-launcher < 3.13.1-6
    nwdiag < 3.0.0-6
    onboard < 1.4.1-35
    onboard-data < 1.4.1-35
    openscap-daemon < 0.1.10-20
    pico-wizard < 0.1.0^git20220929.934dbcf-3
    pipenv < 2022.10.25-3
    pyflowtools < 0.3.4.2-15
    pynag < 1.1.2-12
    pynag-examples < 1.1.2-12
    python-cypari2-doc < 2.1.3-2
    python3-GridDataFormats < 1.0.1-5
    python3-Pyped < 1.4-26
    python3-SALib < 1.4.7-3
    python3-acora < 2.2-15
    python3-actdiag < 3.0.0-6
    python3-adext < 0.3-9
    python3-aioambient < 1.3.0-6
    python3-aiocurrencylayer < 1.0.4-3
    python3-aioguardian < 1.0.4-9
    python3-aiozeroconf < 0.1.8-16
    python3-airthings < 3.2.0-9
    python3-alarmdecoder < 1.13.9-9
    python3-ansi < 0.1.3-30
    python3-ansible-pygments < 0.1.1-5
    python3-apply-defaults < 0.1.4-13
    python3-astropy-helpers < 4.0.1-10
    python3-async-generator < 1.10-17
    python3-awake < 1.0-31
    python3-azure-eventhub < 5.11.1-3
    python3-azure-mgmt-automanage < 1.0.0-3
    python3-azure-mgmt-azurestackhci < 6.0.0-7
    python3-azure-mgmt-dashboard < 1.0.0-3
    python3-azure-mgmt-deploymentmanager < 1:0.2.0-10
    python3-azure-mgmt-fluidrelay < 1.0.0-3
    python3-azure-mgmt-hybridcompute < 7.0.0-7
    python3-azure-mgmt-reservations < 1:2.0.0-7
    python3-bintrees < 2.0.1-31
    python3-blockdiag < 3.0.0-7
    python3-bloom < 0.11.2-4
    python3-bluepy < 1.3.0^20210503git7ad56523-2
    python3-boututils+mayavi < 0.1.9-4
    python3-btlewrap < 0.1.0-9
    python3-catch22 < 0.4.0-12
    python3-certbot-dns-cloudxns < 1.32.0-2
    python3-cle < 9.0.9572-5
    python3-clikit < 0.6.2-8
    python3-cmdln < 2.0.0-25
    python3-colorcet+examples < 3.0.1^20221003git809e291-4
    python3-colour-runner < 0.0.4-28
    python3-compressed-rtf < 1.0.6-3
    python3-coreapi < 2.3.3-10
    python3-coreschema < 0.0.4-10
    python3-cornice-sphinx < 1:0.3-21
    python3-cotyledon-tests < 1.7.3-15
    python3-cypari2 < 2.1.3-2
    python3-cypari2-devel < 2.1.3-2
    python3-cypy < 0.2.0-13
    python3-datanommer-consumer < 0.8.1-20
    python3-datanommer-models < 1.0.4-5
    python3-django-contact-form < 1.4.2-20
    python3-django-robots < 3.1.0-18
    python3-django3 < 3.2.19-2
    python3-dlrn < 0.14.0-13
    python3-dns-lexicon+ddns < 3.11.7-3
    python3-dominate < 2.7.0-3
    python3-drat < 1.0.3-16
    python3-drf-yasg < 1.20.0-8
    python3-drf-yasg+validation < 1.20.0-8
    python3-editdistance-s < 1.0.0-8
    python3-elpy < 1.34.0-10
    python3-fbthrift-devel < 2022.07.11.00-3
    python3-fdb < 2.0.1-9
    python3-flask-bootstrap < 3.3.7.1-21
    python3-flask-htmlmin < 2.2.1-3
    python3-flask-restful < 0.3.9-7
    python3-folly-devel < 2022.07.11.00-5
    python3-fontdump < 1.3.0-29
    python3-formats < 0.1.1-26
    python3-fpylll < 0.5.9-2
    python3-frozen-flask < 0.12-25
    python3-gccinvocation < 0.1-33
    python3-geomet < 1.0.0-3
    python3-gnocchiclient-tests < 7.0.7-9
    python3-google-cloud-access-approval < 1.11.3-2
    python3-google-cloud-access-context-manager < 0.1.16-4
    python3-google-cloud-api-gateway < 1.7.3-2
    python3-google-cloud-apigee-connect < 1.7.1-4
    python3-google-cloud-appengine-admin < 1.9.4-2
    python3-google-cloud-asset < 3.22.0-2
    python3-google-cloud-automl < 2.11.4-2
    python3-google-cloud-bigquery < 3.14.0-4
    python3-google-cloud-bigquery+bqstorage < 3.14.0-4
    python3-google-cloud-bigquery+geopandas < 3.14.0-4
    python3-google-cloud-bigquery+ipython < 3.14.0-4
    python3-google-cloud-bigquery+tqdm < 3.14.0-4
    python3-google-cloud-bigquery-connection < 1.13.2-2
    python3-google-cloud-bigquery-datatransfer < 3.12.1-2
    python3-google-cloud-bigquery-datatransfer+libcst < 3.7.0-2
    python3-google-cloud-bigquery-reservation < 1.11.3-2
    python3-google-cloud-bigquery-storage < 2.22.0-3
    python3-google-cloud-bigquery-storage+fastavro < 2.22.0-3
    python3-google-cloud-bigquery-storage+pandas < 2.22.0-3
    python3-google-cloud-bigquery-storage+pyarrow < 2.22.0-3
    python3-google-cloud-bigtable < 2.21.0-2
    python3-google-cloud-billing < 1.11.4-3
    python3-google-cloud-billing-budgets < 1.12.1-3
    python3-google-cloud-build < 3.21.0-2
    python3-google-cloud-common < 1.2.0-4
    python3-google-cloud-container < 2.34.0-2
    python3-google-cloud-containeranalysis < 2.12.4-3
    python3-google-cloud-containeranalysis+libcst < 2.9.0-2
    python3-google-cloud-data-fusion < 1.8.3-2
    python3-google-cloud-datacatalog < 3.11.1-4
    python3-google-cloud-dataproc < 5.7.0-2
    python3-google-cloud-dataproc+libcst < 5.0.0-2
    python3-google-cloud-dataproc-metastore < 1.13.0-2
    python3-google-cloud-debugger-client < 1.7.0-3
    python3-google-cloud-deploy < 1.14.0-2
    python3-google-cloud-dlp < 3.13.0-3
    python3-google-cloud-dlp+libcst < 3.8.0-2
    python3-google-cloud-dms < 1.7.2-3
    python3-google-cloud-domains < 1.4.1-4
    python3-google-cloud-filestore < 1.5.0-4
    python3-google-cloud-firestore < 2.13.1-2
    python3-google-cloud-functions < 1.13.3-3
    python3-google-cloud-iam < 2.12.2-2
    python3-google-cloud-kms < 2.19.2-2
    python3-google-cloud-monitoring < 2.19.1-2
    python3-google-cloud-org-policy < 1.8.3-3
    python3-google-cloud-os-config < 1.15.3-2
    python3-google-cloud-private-ca < 1.8.2-3
    python3-google-cloud-pubsub < 2.14.1-6
    python3-google-cloud-pubsub+libcst < 2.14.1-6
    python3-google-cloud-redis < 2.13.2-3
    python3-google-cloud-redis+libcst < 2.9.0-3
    python3-google-cloud-shell < 1.6.1-4
    python3-google-cloud-source-context < 1.4.3-3
    python3-google-cloud-spanner < 3.40.1-2
    python3-google-cloud-testutils < 1.3.3-7
    python3-googletrans < 4.0.0~rc1-10
    python3-grafeas < 1.8.1-2
    python3-grako < 3.99.9-6
    python3-graphitesend < 0.10.0-23
    python3-grpcio-admin < 1.48.4-9
    python3-grpcio-csds < 1.48.4-9
    python3-guizero < 1.3.0-5
    python3-gzipstream < 2.8.6-18
    python3-hs-dbus-signature < 0.07-11
    python3-htmlmin < 0.1.12-21
    python3-igor < 0.3-27
    python3-imgbased < 1.2.5-0.2
    python3-importmagic < 0.1.7-24
    python3-interfile < 0.3.1-25
    python3-ipgetter < 0.6-28
    python3-itypes < 1.2.0-8
    python3-jep < 3.9.1-9
    python3-jsonmodels < 2.4-14
    python3-jsonrpc-server < 0.4.0-9
    python3-jsonschema-spec < 0.1.6-4
    python3-jupyter-server-fileid < 0.8.0-2
    python3-jupyter-server-ydoc < 0.7.0-2
    python3-jupyter-ydoc < 0.3.1-2
    python3-kaitaistruct < 0.10-4
    python3-krbcontext < 0.10-13
    python3-lacrosse < 0.4-10
    python3-lasagne < 0.1-26
    python3-lazr-smtptest < 2.0.3-24
    python3-leveldb < 0.201-12
    python3-liblarch < 3.1.0-6
    python3-liblarch-gtk < 3.1.0-6
    python3-libproxy < 0.4.18-7
    python3-libssh2 < 0.7.1-36
    python3-lightblue < 0.1.4-18
    python3-logging-tree < 1.9-8
    python3-luxcorerender < 2.7-0.6
    python3-martian < 0.15-20
    python3-maya < 0.6.1-10
    python3-metaextract < 1.0.9-3
    python3-molecule < 4.0.4-7
    python3-molecule-docker < 2.1.0-3
    python3-molecule-podman < 2.0.3-3
    python3-mraa < 2.2.0-11
    python3-mysql-debug < 1.4.6-13
    python3-networkmanager < 2.2-10
    python3-nose_fixes < 1.3-22
    python3-notario < 0.0.16-16
    python3-nwdiag < 3.0.0-6
    python3-okaara < 1.0.37-23
    python3-openapi-spec-validator+requests < 0.5.7-4
    python3-openipmi < 2.0.32-7
    python3-openopt < 0.5629-12
    python3-opentelemetry-instrumentation-grpc < 1:0.39~b0-17
    python3-opentelemetry-instrumentation-grpc+instruments < 1:0.39~b0-17
    python3-operator-courier < 2.1.9-10
    python3-optcomplete < 1.2.1-16
    python3-oslo-sphinx < 4.18.0-18
    python3-pacpy < 1.0.3.1-17
    python3-pecan-notario < 0.0.3-26
    python3-pep517 < 0.13.0-3
    python3-petlink < 0.3.4-15
    python3-phabricator < 0.7.0-21
    python3-py9p < 1.0.9-30
    python3-pyPEG2 < 2.15.2-25
    python3-pydenticon < 0.3.1-19
    python3-pyftpdlib < 1.5.7-2
    python3-pygpu < 0.7.6-20
    python3-pygpu-devel < 0.7.6-20
    python3-pyhirte < 0.4.0-2
    python3-pymc3 < 3.11.4-6
    python3-pymoc < 0.5.0-24
    python3-pyngus < 2.3.0-15
    python3-pynlpl < 1.2.7-15
    python3-pyoptical < 0.4-26
    python3-pyside2 < 1:5.15.7-3
    python3-pyside2-devel < 1:5.15.7-3
    python3-pytelegrambotapi < 4.11.0-2
    python3-pytenable < 1.4.12-3
    python3-pytest-bdd5 < 5.0.0-4
    python3-pytest-beakerlib < 0.7.1-21
    python3-pytest-capturelog < 0.7-28
    python3-pytest-flake8 < 1.1.1-5
    python3-pytest-metadata < 1.7.0-11
    python3-pytest-sanic < 1.9.1-4
    python3-pytest-toolbox < 0.4-13
    python3-pytest-virtualenv < 1.7.0-17
    python3-pyutil < 3.1.0-15
    python3-pyverbs < 44.0-4
    python3-pyvex < 9.2.32-3
    python3-pyvhacd < 0.0.2-2
    python3-qrencode < 1.2~git.1.b75219e-16
    python3-ratelimiter < 1.2.0-11
    python3-rdflib-jsonld < 0.6.0-8
    python3-red-black-tree-mod < 1.21-2
    python3-remctl < 3.18-6
    python3-restfly < 1.4.6-5
    python3-restsh < 0.2-23
    python3-rosinstall < 0.7.8-18
    python3-script < 1.7.2-30
    python3-seqdiag < 3.0.0-6
    python3-shiboken2 < 1:5.15.7-3
    python3-shiboken2-devel < 1:5.15.7-3
    python3-signalfd < 0.1-34
    python3-simplemediawiki < 1.2.0-0.32
    python3-simpleparse < 2.2.2-12
    python3-simplewrap < 0.3.3-16
    python3-simpy < 3.0.9-24
    python3-slip < 0.6.4-30
    python3-slip-dbus < 0.6.4-30
    python3-smart-gardena < 0.7.10-9
    python3-snipeit < 1.2-9
    python3-spdx < 2.5.0-11
    python3-spdx-lookup < 0.3.2-11
    python3-sphinx_ansible_theme < 0.9.1-5
    python3-sphinxcontrib-actdiag < 2.0.0-9
    python3-sphinxcontrib-applehelp < 1.0.2-12
    python3-sphinxcontrib-jsmath < 1.0.1-20
    python3-stdio-mgr < 1.0.1-11
    python3-subvertpy < 0.10.1-21
    python3-tambo < 0.4.0-23
    python3-test_server < 0.0.31-19
    python3-theano < 1.1.2-7
    python3-timeunit < 1.1.0-12
    python3-tortilla < 0.4.1-26
    python3-twitter < 3.5-17
    python3-typed_ast < 1.5.5-2
    python3-uamqp < 1.6.0-3
    python3-upm < 2.0.0-15
    python3-upoints < 0.12.2-24
    python3-upt-cpan < 0.5-12
    python3-upt-fedora < 0.3-11
    python3-upt-pypi < 0.4-11
    python3-upt-rubygems < 0.2-11
    python3-uri-templates < 0.6-29
    python3-vagrantpy < 0.6.0-12
    python3-vcstools < 0.1.42-14
    python3-versiontools < 1.9.1-34
    python3-vertica < 1.0.5-5
    python3-visionegg-quest < 1.1-17
    python3-woffTools < 0.1-0.38
    python3-wstool < 0.1.18-12
    python3-xds-protos < 0.0.11-32
    python3-xtermcolor < 1.3-28
    python3-y-py < 0.5.5-2
    python3-yamlordereddictloader < 0.4.0-16
    python3-yourls < 0.2.0-31
    python3-ypy-websocket < 0.8.2-4
    python3-zabbix-api-erigones < 1.2.4-20
    python3-zuul-client < 0.0.4-10
    resultsdb < 2.2.0-14
    resultsdb_frontend < 2.1.2-14
    sagemath < 9.8-2
    sagemath-core < 9.8-2
    sagemath-data < 9.8-2
    sagemath-data-combinatorial_designs < 9.8-2
    sagemath-data-conway_polynomials < 9.8-2
    sagemath-data-elliptic_curves < 9.8-2
    sagemath-data-elliptic_curves_large < 9.8-2
    sagemath-data-etc < 9.8-2
    sagemath-data-graphs < 9.8-2
    sagemath-data-polytopes_db < 9.8-2
    sagemath-jupyter < 9.8-2
    sagemath-sagetex < 9.8-2
    scudcloud < 1.65-17
    sendKindle < 3-15
    seqdiag < 3.0.0-6
    sgmanager < 2.0.0-14
    sugar-paint < 70-12
    swid-tools < 0.8.18-3
    thunarx-python < 0.5.2-7
    transmageddon < 1.5-31
    upt < 0.10.3-14
    vitables < 3.0.2-17
    vitables-doc < 3.0.2-17
    whipper-plugin-eaclogger < 0.5.0-11
    woffTools < 0.1-0.38
    yokadi < 1.2.0-7
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2233409)

    R-rgdal < 1.6.7-3
    (See https://src.fedoraproject.org/rpms/R-rgdal/c/c68d42d4e56b976be3a50adcbb65efdfc36b8318?branch=f39)

    celestia < 1.7.0~320231229.git6899839-6
    celestia-data < 1.7.0~320231125.gitdb53ae3-4
    (See https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/LAE5JLO3KYVQVSF776H4QLY6DTAUQHWR/)


pkgId: 85bbc4330e49793f6649dc99d9c1936c30de3cb9bfccf1e39c217d3c8ab0adc0
name: fedora-remix-logos
arch: src
version: 1.0.0
epoch: 0
release: 26.fc40
summary: Fedora Remix logos
url: https://fedoraproject.org/wiki/Legal/Secondary_trademark_usage_guidelines
rpm_license: Licensed only for approved usage, see COPYING for details.
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fedora-remix-logos-1.0.0-26.fc40.src.rpm
checksum_type: sha256
description:
  The fedora-remix-logos package contains image files which incorporate the
  Fedora trademarks (the "Marks"). The Marks are trademarks or registered
  trademarks of Red Hat, Inc. in the United States and other countries and
  are used by permission.

  This package and its content may be used and distributed under the Fedora
  Trademark Guidelines, specifically, it is intended for use in a Fedora
  Remix, not a Fedora Spin.

  See the included COPYING file for full information on approved use, copying
  and redistribution of this package and its contents.


pkgId: 60f887a4ab822fa093d538646b5dd9f448267ad9201a4138d5c6f5d081e57b02
name: fedora-repo-zdicts
arch: src
version: 2403.1
epoch: 0
release: 1.fc40
summary: Zstd dictionaries for Fedora repository metadata
url: https://pagure.io/fedora-repo-zdicts
rpm_license: BSD-2-Clause
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fedora-repo-zdicts-2403.1-1.fc40.src.rpm
checksum_type: sha256
description:
  zchunk is a compressed file format that splits the file into independent
  chunks.  This package contains zstd libraries tailored for Fedora's repository
  metadata to improve their compression.


pkgId: a33b966f7b80542dd0a4b50d03ad0974315a18afb5d14e77b82685771b1d571f
name: fedora-upgrade
arch: src
version: 40.1
epoch: 0
release: 1.fc40
summary: Upgrade Fedora to next version using dnf upgrade (unofficial tool)
url: https://github.com/xsuchy/fedora-upgrade
rpm_license: GPL-2.0-only
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fedora-upgrade-40.1-1.fc40.src.rpm
checksum_type: sha256
description:
  Upgrade Fedora to next version using dnf upgrade.
  This is attempt to automatize steps as listed here:
  https://fedoraproject.org/wiki/Upgrading_Fedora_using_package_manager

  This is an unofficial tool, for official Fedora-supported
  upgrades please see:
  https://fedoraproject.org/wiki/Upgrading


pkgId: dc19d9345b9ea44263c5b1afbcd0aa6d477a2288f250bde3b34616e3810166e6
name: fedora-workstation-backgrounds
arch: src
version: 1.6
epoch: 0
release: 5.fc40
summary: Desktop backgrounds for Fedora Workstation
url: https://pagure.io/fedora-design/fedora-workstation-backgrounds
rpm_license: CC-BY 4.0
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fedora-workstation-backgrounds-1.6-5.fc40.src.rpm
checksum_type: sha256
description:
  The fedora-workstation-backgrounds packages contains the additional standard
  wallpapers for Fedora Workstation.


pkgId: 61a0b62a01bf7f5d5855c829b693033ea59c5e352b9b0240a98bead8b352a5da
name: fedorainfinity-backgrounds
arch: src
version: 0.0.5
epoch: 0
release: 29.fc40
summary: Fedora Infinity desktop backgrounds
url: http://fedoraproject.org/wiki/Artwork/F8Themes/Infinity
rpm_license: LGPLv2
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fedorainfinity-backgrounds-0.0.5-29.fc40.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora Infinity theme,
  which was the default theme for Fedora 8.


pkgId: c0e8ac90cf82f9556728f963973e2becd3018e5430d811c4f8ab4fe0462e4bf7
name: feedbackd
arch: src
version: 0.2.0
epoch: 0
release: 4.fc40
summary: Feedback library for GNOME
url: https://source.puri.sm/Librem5/feedbackd
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/feedbackd-0.2.0-4.fc40.src.rpm
checksum_type: sha256
description:
  feedbackd provides a DBus daemon (feedbackd) to act on events to provide
  haptic, visual and audio feedback. It offers a library (libfeedback) and
  GObject introspection bindings to ease using it from applications.


pkgId: de7db6b31e2230f7f81bc425e2a8fcd37a8dfbf3beb53ebbfe219a733d379eee
name: feh
arch: src
version: 3.10.2
epoch: 0
release: 3.fc40
summary: Fast command line image viewer using Imlib2
url: http://feh.finalrewind.org
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/feh-3.10.2-3.fc40.src.rpm
checksum_type: sha256
description:
  feh is a versatile and fast image viewer using imlib2, the
  premier image file handling library. feh has many features,
  from simple single file viewing, to multiple file modes using
  a slide-show or multiple windows. feh supports the creation of
  montages as index prints with many user-configurable options.


pkgId: 6316b9f1ebdfde020e4ea798eac4e635f5839eaca463d4d1234d7fd17cda9187
name: fennel
arch: src
version: 1.4.2
epoch: 0
release: 1.fc40
summary: A Lisp that compiles to Lua
url: https://fennel-lang.org/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fennel-1.4.2-1.fc40.src.rpm
checksum_type: sha256
description:
  Fennel is a Lisp that compiles to Lua. It aims to be easy to use, expressive,
  and has almost zero overhead compared to handwritten Lua.

  * *Full Lua compatibility* - You can use any function or library from Lua.
  * *Zero overhead* - Compiled code should be just as or more efficient than
     hand-written Lua.
  * *Compile-time macros* - Ship compiled code with no runtime dependency on
     Fennel.
  * *Embeddable* - Fennel is a one-file library as well as an executable. Embed it
     in other programs to support runtime extensibility and interactive
     development.

  At https://fennel-lang.org there's a live in-browser repl you can use without
  installing anything.


pkgId: a4cd318a6b720ec0f05dafc04028348cfd8a9828ca4ea672ca957091a1d49f9a
name: fes
arch: src
version: 0.2
epoch: 0
release: 12.fc40
summary: Fast Exhaustive Search
url: https://www-almasty.lip6.fr/~bouillaguet/implementation.html
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/fes-0.2-12.fc40.src.rpm
checksum_type: sha256
description:
  This external library implements an efficient implement of exhaustive
  search to solve systems of low-degree boolean equations. Exhaustive
  search is asymptotically faster than computing a Groebner basis,
  except in special cases. This particular implementation is
  particularly efficient (in the good cases it tests 3 candidate
  solutions per CPU cycle on each core).


pkgId: 4d677f882b5f099308a1879b651100298b611a6736097fd640d7bddaa094609e
name: festival-freebsoft-utils
arch: src
version: 0.10
epoch: 0
release: 35.fc40
summary: Utilities that enhance Festival with some useful features
url: https://www.freebsoft.org/festival-freebsoft-utils
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: localhost
location_href: Packages/festival-freebsoft-utils-0.10-35.fc40.src.rpm
checksum_type: sha256
description:
  A collection of utilities that enhance Festival with some useful features. They
  provide all that is needed for interaction with Speech Dispatcher.

  Key festival-freebsoft-utils features are:

  • Generalized concept of input events. festival-freebsoft-utils allows not only
    plain text synthesis, but also combining it with sounds. Additionally,
    mechanism of logical events mapped to other events is provided.
  • Substitution of events for given words.
  • High-level voice selection mechanism and setting of basic prosodic parameters.
  • Spelling mode.
  • Capital letter signalization.
  • Punctuation modes, for explicit reading or not reading punctuation characters.
  • Incremental synthesis of texts and events.
  • Speech Dispatcher support.
  • Rudimentary SSML support.
  • Enhance the Festival extension language with functions commonly used in Lisp.
  • Support for wrapping already defined Festival functions by your own code.
  • Everything is written in the extension language, no patching of the Festival
    C++ sources is needed.


