#! grep -F
###### unstable ######
Address belongs to variable 
APIC calibration not consistent
 invoked oom-killer: gfp_mask=0x
' is using obsolete 
sockopt(PACKET_SIZE) is deprecated: fix your app
sockopt(CHANGE_L/R) is deprecated: fix your app
' is using deprecated sysctl (
 is using a deprecated SCSI ioctl, please convert it to SG_IO
) uses deprecated remap_file_pages() syscall. 
 using old stat() call. Recompile your binary.
###### shows up also in normal printk levels ######
Asymmetric key parser '
 conflict with 
could not be loaded.
 devices, algorithm 
 does not support 
 Duplex, Flow Control: 
ext4_da_release_space: 
 is not supported
: link is not ready
megasas: INIT adapter done
 not supported
PEBS disabled due to CPU errata
 request failed (
secondary cpu clock
): transmit queue 
: unexpected interrupt 
BTRFS: Transaction aborted (error 
Info: mapping multiple BARs. Your kernel is fine.
 line discipline 
Management GUID not found
 request failed 
successfully loaded
###### too common messages ######
could not be loaded.
 does not support 
failed to peer to 
failed to enable device
hub failed to enable device, error 
 is not supported
: link is not ready
 notification failure
root hub lost power or was reset
 Set to 'normal', was 'performance'
Unable to find any System Interface(s)
Unsupported brightness interface, 
usb: failed to peer 
usb: port power management may be unreliable
**   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
** trace_printk() being used. Allocating extra memory.  **
** This means that this is a DEBUG kernel and it is     **
** unsafe for produciton use.                           **
** If you see this message and you are not debugging    **
** the kernel, report this immediately to your vendor!  **
No controller found
 failed with error 
 address mismatch in FADT: 
Invalid length for FADT/
32/64X address mismatch in FADT/
32/64X length mismatch in FADT/
perf interrupt took too long (
 conflicts with OpRegion 0x
unable to register 
Poll interval is 0 for generic hardware error source: 
exception Emask 0x
 - rounding interval to 
 microframes, ep desc says 
BMC returned incorrect response,
Starting new kernel
drm: drm_edid_block_valid
Raw EDID:
ACPI: Invalid BIOS MADT, disabling ACPI
ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field
ACPI BIOS Error (bug): Could not resolve symbol
ACPI Error: Aborting method
ACPI: Error parsing LAPIC address override entry
ACPI: Error parsing LAPIC NMI entry
ACPI Error: No handler for Region
ACPI Error: Region IPMI (ID=7) has no handler
ACPI Error: Method parse/execution failed
ACPI Error: AE_NOT_EXIST, Evaluating _PMC
ACPI: No IRQ available for PCI Interrupt Link 
ACPI: PCI Interrupt Link 
ACPI needs to be enabled for this driver to work!
: Failed to register ACPI driver: 
No Caching mode page found
Assuming drive cache: write through
DMAR-IR: Failed to copy IR table for dmar[0-9] from previous kernel
CPU feature 'AVX registers' is not supported.
CPU feature '(null)' is not supported.
callbacks.suppressed
smpboot: weird, boot CPU (#0) not listed by the BIOS
Consider compiling CPUfreq support into your kernel.
PnPBIOS: 
Warning: Processor Platform Limit event detected, but not handled.
Kernel Offset: disabled
utf8 is not a recommended IO charset
Corrupted low memory at
Disabling lock debugging due to kernel taint
augmented rbtree testing
intel_rapl: driver does not support CPU family
The Iris poweroff handler will not be installed.
Unable to detect cache hierarchy from DT for CPU
no IO addresses supplied
used greatest stack depth:
unsafe for production use.
can't access extended PCI configuration
intel rapl: no valid rapl domains found in package
dummy-irq: no IRQ given.  Use irq=N
Unable to detect cache hierarchy from DT for CPU
Failed to find cpu
tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
mwavedd::mwave init: Error: Failed to initialize
:--- Start of test: 
no IO addresses supplied
sc1200wdt: io parameter must be specified
Error: Driver 'pcspkr' is already registered, aborting...
wdt: I/O address 
power supply register: Expected proper parent device for
telclk interrupt = 0x
i2c-parport-light: adapter type unspecified
i2c-parport: adapter type unspecified
watchdog: Software Watchdog: a legacy watchdog module is probably present
Warning: could not register annotated branches stats
 not detected, module not inserted
CPU feature 'AVX registers' is not supported
applesmc: supported laptop not found
applesmc: driver init failed
wdt: misc register failed
sch56xx common: Unsupported device id
uses deprecated remap_file_pages
smsc37b787 wdt: Unable to register miscdev on minor
hdaps: supported laptop not found
hdaps: driver init failed
mk712: device not present
kvm: no hardware support
: invalid alarm value
: cannot register miscdev on minor=
Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
: failed to read out thermal zone
acer wmi: No or unsupported WMI interface, unable to load
cros ec lpc: unsupported system
Command line:
qemu-system-x86_64
Kernel command line:
OF: /testcase-data/phandle-tests/consumer-.: could not find phandle
OF: /testcase-data/phandle-tests/consumer-.: arguments longer than property
OF: /testcase-data/phandle-tests/consumer-.: could not get #phandle-cells-missing
OF: /testcase-data/phandle-tests/consumer-.: could not get #phandle-missing-cells
OF: overlay: WARNING: memory leak will occur if overlay removed, property:
ACPI: NR_CPUS/possible_cpus limit of 
EINJ: EINJ table not found
Platform not recognized (You could try the module's force-parameter
temperature above threshold, cpu clock throttled
torture:
busted-torture
busted:  End-test grace-period state:
tasks:  End-test grace-period state:
Failure/close-call rcutorture reader segments:
 bucket[
\[ *[CT][0-9]*\]
bcma-pci-bridge 0000:01:00.0: bus0: No SPROM available
db_root: cannot open: /etc/target
e cgroup1: Unknown subsys name '__DEVEL__sane_behavior'
find.*bit:.*ns,.*iterations
gpio_winbond: not an our chip
mce: [Hardware Error]:
parport_pc parport_pc.*: Unable to set coherent dma mask: disabling DMA
power_meter ACPI000D:00: Ignoring unsafe software power cap!
pstore: crypto_comp_decompress failed
pstore: decompression failed:
Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available!
tcrypt: failed to load transform for cfb(aes)
tpm tpm0: A TPM error (.*) occurred attempting to determine the timeouts
tpm tpm0: tpm_try_transmit: tpm_send: error
urandom_read: .* callbacks suppressed
asix_rx_fixup() Bad Header Length
genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq
PM: Some devices failed to suspend, or early wake event detected
DHCP/BOOTP: Reply not for us on
e Filesystem requires source device
e Pipe file descriptor not open
get_platform_config: Failed to get platform config, falling back to sub-optimal default file
get_platform_config: No default platform config file found
unable to obtain working firmware
validate_scratch_checksum: Config bitmap uninitialized
validate_scratch_checksum: Please update your BIOS to support active channels
HFI: Invalid PCI NUMA node. Performance may be affected
HFI: System BIOS may need to be upgraded
pciehp .*: Slot(.*): Power fault
Aborting journal on device
Buffer I/O error on dev
Dev .*: unable to read RDB block
EXT4-fs error (device .*):
EXT4-fs (.*):
F2FS-fs (.*):
jbd2_journal_bmap: journal block not found at offset
bochs-drmdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer
cgroup1: Need name or subsystem set
genirq: Failed to request resources for SYNA
in_atomic(): [0-9]*, irqs_disabled(): [0-9]*,
mei_me 0000:00:16.0:
Memory failure: .*Sending SIGBUS to
Report any missing HW support to linux-ide@vger.kernel.org
BUG: soft lockup - CPU
Kernel panic - not syncing: softlockup: hung tasks
kvm: host upgrade recommended
smpboot: do_boot_cpu failed
VFS:Filesystem freeze failed
File: /fs/scratch/file PID:
toshiba: not a supported Toshiba laptop
leds_apu: No PC Engines APUv1 board detected
disabled by BIOS
